[PATCH] mtd: spi-nor: Enable mt35xu512aba_fixups for all mt35xx flashes

Venkatesh Yadav Abbarapu venkatesh.abbarapu at amd.com
Fri Nov 22 10:26:19 CET 2024


Enable mt35xu512aba_fixups for all mt35 series flashes to work
in DTR mode, and return after nor->fixups is updated, otherwise
it will get overwritten with macronix_octal_fixups.
This flash works in DTR mode only if CONFIG_SPI_FLASH_MT35XU
is enabled and SPI_NOR_OCTAL_DTR_READ flag is set in id table.

Additionally, a new flag, "SPI_XFER_SET_DDR", has been introduced
to instruct the OSPI controller driver to switch to DDR mode.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
 drivers/mtd/spi/spi-nor-core.c | 8 +++++++-
 include/spi.h                  | 1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index ec841fb13b..8d201433d5 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -4073,6 +4073,7 @@ static int spi_nor_micron_octal_dtr_enable(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
+	nor->spi->flags |= SPI_XFER_SET_DDR;
 	buf = SPINOR_MT_OCT_DTR;
 	op = (struct spi_mem_op)
 		SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 1),
@@ -4404,8 +4405,13 @@ void spi_nor_set_fixups(struct spi_nor *nor)
 #endif
 
 #ifdef CONFIG_SPI_FLASH_MT35XU
-	if (!strcmp(nor->info->name, "mt35xu512aba"))
+	if (!strcmp(nor->info->name, "mt35xu512aba") ||
+	    !strcmp(nor->info->name, "mt35xl512aba") ||
+	    !strcmp(nor->info->name, "mt35xu01g") ||
+	    !strcmp(nor->info->name, "mt35xu02g")) {
 		nor->fixups = &mt35xu512aba_fixups;
+		return;
+	}
 #endif
 
 #if CONFIG_IS_ENABLED(SPI_FLASH_MACRONIX)
diff --git a/include/spi.h b/include/spi.h
index 6944773b59..d7fef36662 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -164,6 +164,7 @@ struct spi_slave {
 #define SPI_XFER_U_PAGE		BIT(4)
 #define SPI_XFER_STACKED	BIT(5)
 #define SPI_XFER_LOWER		BIT(6)
+#define SPI_XFER_SET_DDR	BIT(7)
 
 	/*
 	 * Flag indicating that the spi-controller has multi chip select
-- 
2.25.1



More information about the U-Boot mailing list