[PATCH v4 02/20] net: fec_mxc: fix probing for imx8qxp
Heiko Schocher
hs at denx.de
Sat Nov 23 17:52:46 CET 2024
probing on capricorn board (imx8qxp based) brings:
Can't find FEC0 clk rate: -19
Cause is that when probing fec_mxc driver, fec_mii_setspeed()
is called which calls fec_get_clk_rate().
fec_mii_setspeed() calls fec_get_clk_rate with NULL pointer
for udev and so as in IMX8QXP case CLK_CCF is enabled
udev gets searched with:
uclass_get_device_by_seq(UCLASS_ETH, idx, &dev);
but we do not have yet a UCLASS_ETH ! as we just probing it!
Prevent this by passing udev to fec_get_clk_rate()
Signed-off-by: Heiko Schocher <hs at denx.de>
---
(no changes since v1)
board/boundary/nitrogen6x/nitrogen6x.c | 2 +-
board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +-
drivers/net/fec_mxc.c | 14 +++++++-------
include/netdev.h | 2 +-
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index b85fd806cba..1adee9a461f 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -281,7 +281,7 @@ int board_eth_init(struct bd_info *bis)
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
- bus = fec_get_miibus(base, -1);
+ bus = fec_get_miibus(NULL, base, -1);
if (!bus)
return -EINVAL;
/* scan phy 4,5,6,7 */
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index e9269ef5353..b543bf8c1fb 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -385,7 +385,7 @@ static int find_ethernet_phy(void)
int phy_addr = -ENOENT;
#ifdef CONFIG_FEC_MXC
- bus = fec_get_miibus(ENET_BASE_ADDR, -1);
+ bus = fec_get_miibus(NULL, ENET_BASE_ADDR, -1);
if (!bus)
return -ENOENT;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index d6d5cb52fdd..eca681b16d1 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -160,7 +160,7 @@ static int fec_get_clk_rate(void *udev, int idx)
}
}
-static void fec_mii_setspeed(struct ethernet_regs *eth)
+static void fec_mii_setspeed(struct udevice *dev, struct ethernet_regs *eth)
{
/*
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
@@ -182,7 +182,7 @@ static void fec_mii_setspeed(struct ethernet_regs *eth)
u32 hold;
int ret;
- ret = fec_get_clk_rate(NULL, 0);
+ ret = fec_get_clk_rate(dev, 0);
if (ret < 0) {
printf("Can't find FEC0 clk rate: %d\n", ret);
return;
@@ -581,7 +581,7 @@ static int fecmxc_init(struct udevice *dev)
fec_reg_setup(fec);
if (fec->xcv_type != SEVENWIRE)
- fec_mii_setspeed(fec->bus->priv);
+ fec_mii_setspeed(dev, fec->bus->priv);
/* Set Opcode/Pause Duration Register */
writel(0x00010020, &fec->eth->op_pause); /* FIXME 0xffff0020; */
@@ -996,7 +996,7 @@ static void fec_free_descs(struct fec_priv *fec)
free(fec->tbd_base);
}
-struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id)
+struct mii_dev *fec_get_miibus(struct udevice *dev, ulong base_addr, int dev_id)
{
struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
struct mii_dev *bus;
@@ -1018,7 +1018,7 @@ struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id)
free(bus);
return NULL;
}
- fec_mii_setspeed(eth);
+ fec_mii_setspeed(dev, eth);
return bus;
}
@@ -1354,10 +1354,10 @@ static int fecmxc_probe(struct udevice *dev)
if (!bus) {
dm_mii_bus = false;
#ifdef CONFIG_FEC_MXC_MDIO_BASE
- bus = fec_get_miibus((ulong)CONFIG_FEC_MXC_MDIO_BASE,
+ bus = fec_get_miibus(dev, (ulong)CONFIG_FEC_MXC_MDIO_BASE,
dev_seq(dev));
#else
- bus = fec_get_miibus((ulong)priv->eth, dev_seq(dev));
+ bus = fec_get_miibus(dev, (ulong)priv->eth, dev_seq(dev));
#endif
}
if (!bus) {
diff --git a/include/netdev.h b/include/netdev.h
index 2a06d9a261b..949245ecdec 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -117,7 +117,7 @@ static inline int pci_eth_init(struct bd_info *bis)
return num;
}
-struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id);
+struct mii_dev *fec_get_miibus(struct udevice *dev, ulong base_addr, int dev_id);
#ifdef CONFIG_PHYLIB
struct phy_device;
--
2.20.1
More information about the U-Boot
mailing list