[PATCH 1/4] clk: qcom: add clk_phy_mux_enable() for PCIe PIPE clock
Neil Armstrong
neil.armstrong at linaro.org
Mon Nov 25 09:34:26 CET 2024
The PCIe PIPE clock requires a special setup function to
mux & enable the clock from the PCIe PHY before the PHY
has enabled the clock.
Import the clk_phy_mux_enable() from the Linux driver to
use the same implementation regarding the PIPE clock.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/clk/qcom/clock-qcom.c | 19 +++++++++++++++++++
drivers/clk/qcom/clock-qcom.h | 2 ++
2 files changed, 21 insertions(+)
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index 25ca67e537d112dda236837d3d3984f9b666365e..7687bbe6a23b436e4ddf3b29d1c910062961126d 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -166,6 +166,25 @@ void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div,
clk_bcr_update(base + cmd_rcgr);
}
+#define PHY_MUX_MASK GENMASK(1, 0)
+#define PHY_MUX_PHY_SRC 0
+#define PHY_MUX_REF_SRC 2
+
+void clk_phy_mux_enable(phys_addr_t base, uint32_t cmd_rcgr, bool enabled)
+{
+ u32 cfg;
+
+ /* setup src select and divider */
+ cfg = readl(base + cmd_rcgr);
+ cfg &= ~(PHY_MUX_MASK);
+ if (enabled)
+ cfg |= FIELD_PREP(PHY_MUX_MASK, PHY_MUX_PHY_SRC);
+ else
+ cfg |= FIELD_PREP(PHY_MUX_MASK, PHY_MUX_REF_SRC);
+
+ writel(cfg, base + cmd_rcgr);
+}
+
const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
{
if (!f)
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index 78d9b1d81ece1b3dd96b7bd0ab1a69fa016523b6..ff336dea39cf5cbe35f37f93669285897ba185a4 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -6,6 +6,7 @@
#define _CLOCK_QCOM_H
#include <asm/io.h>
+#include <linux/bitfield.h>
#define CFG_CLK_SRC_CXO (0 << 8)
#define CFG_CLK_SRC_GPLL0 (1 << 8)
@@ -102,6 +103,7 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr,
int div, int m, int n, int source, u8 mnd_width);
void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div,
int source);
+void clk_phy_mux_enable(phys_addr_t base, uint32_t cmd_rcgr, bool enabled);
static inline void qcom_gate_clk_en(const struct msm_clk_priv *priv, unsigned long id)
{
--
2.34.1
More information about the U-Boot
mailing list