[PATCH v4 00/20] imx8qxp: siemens board: updates / sync with mainline

[Fabio Estevam]

On Sat, Nov 23, 2024 at 1:53 PM Heiko Schocher <hs at denx.de> wrote:
>
> Updating the imx8qxp based siemens board. The current
> state of the siemens imx8qxp board is in an old not
> really working state.
>
> This series brings mainline back working on the siemens
> deneb board, the guedi board is dropped as not longer used.
>
> make all runs fine without having all the needed firmware images
> on board, and so CI @azure.
>
> If you want to have a working image you need to copy the
> following images to your build directory $BDIR:
>
> ATF : bl31-imx8dx.bin            -> $BDIR/bl31.bin
> AHAB: mx8qxc0-ahab-container.img -> $BDIR/mx8qxc0-ahab-container.img
> SCFW: deneb-scfw-tcm.bin         -> $BDIR/mx8qx-mek-scfw-tcm.bin
>
> and call make flash.bin
>
> There are also updates for ethernet and USB support, but not
> ready to push upstream currently, hopefully following soon.
>
> Azure build:
> https://dev.azure.com/hs0298/hs/_build/results?buildId=139&view=results
>
> series is based on mainline commit:
> 7fe55182d92 ("Merge tag 'xilinx-for-v2025.01-rc3-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze")
>
> Ah yes, not to forget, we work at siemens also on a CI setup to
> have a mainline nightly build and test on hardware. We already
> have such a CI for internall U-Boot versions up and running, but
> we do not want again loose sync with mainline.

Applied all for -next, thanks.