[PATCH v1 6/6] configs: stm32mp25: enable CONFIG_SYS_64BIT_LBA

[Patrice Chotard]

In arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c, in init_device(),
in case of RAW_IMAGE, part->size = block_dev->lba * block_dev->blksz.

  _ part->size is declared as u64.
  _ block_dev->lba is declared as lbaint_t which is uint64_t
    if CONFIG_SYS_64BIT_LBA is enable, otherwise ulong.
  _ block_dev->blksz is declared as unsigned long.

For example, in case block_dev->lba = 0x1dacc00, block_dev->blksz = 0x200
then part->size 0x5980000 which is incorrect as both are declared as ulong.

To fix this overflow issue, enable CONFIG_SYS_64BIT_LBA, block_dev->lba is
then declared as uint64_t and part->size get the correct value 0x3b5980000.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---

 configs/stm32mp25_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/stm32mp25_defconfig b/configs/stm32mp25_defconfig
index d3f0c088157..073172c3804 100644
--- a/configs/stm32mp25_defconfig
+++ b/configs/stm32mp25_defconfig
@@ -33,6 +33,7 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_LOG=y
 CONFIG_OF_LIVE=y
 CONFIG_NO_NET=y
+CONFIG_SYS_64BIT_LBA=y
 CONFIG_GPIO_HOG=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
-- 
2.25.1