[PATCH 6/8] include: configs: j721e_evm: Increase memory offset for tiboot3.bin in HyperFlash

[Anurag Dutta]

From: Aswath Govindraju <a-govindraju at ti.com>

The size of J7200 tiboot3.bin is 516KB but the memory reserved for it in
HyperFlash was 512KB. This led to overlap of tiboot3.bin over tispl.bin
region and break in HyperFlash boot mode.

Therefore, fix this by increasing the memory allocated for tiboot3.bin
to 1MB for J7200.

Fixes: cf1d6867f774 ("board: ti: j7200: Introduce support for j7200 build targets")

Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a at ti.com>
Signed-off-by: Anurag Dutta <a-dutta at ti.com>
---
 include/configs/j721e_evm.h | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index bdf12ee8f7..8512062952 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -15,11 +15,14 @@
 #define CFG_SYS_FLASH_BASE		0x000000000
 
 /* SPL Loader Configuration */
-#if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#if defined(CONFIG_TARGET_J721E_A72_EVM)
 #define CFG_SYS_UBOOT_BASE		0x50280000
-/* Image load address in RAM for DFU boot*/
-#else
+#elif defined(CONFIG_TARGET_J7200_A72_EVM)
+#define CFG_SYS_UBOOT_BASE		0x50300000
+#elif defined(CONFIG_TARGET_J721E_R5_EVM)
 #define CFG_SYS_UBOOT_BASE		0x50080000
+#else
+#define CFG_SYS_UBOOT_BASE		0x50100000
 #endif
 
 /**
-- 
2.34.1