[PATCH] ARM: imx: Replace YModem with SDP on Data Modul i.MX8M Mini eDM SBC SPL

[Fabio Estevam]

On Thu, Nov 28, 2024 at 9:17 PM Marek Vasut <marex at denx.de> wrote:
>
> The YModem support in SPL was never really used on this device,
> the SDP support is much more convenient on i.MX8M Mini based
> hardware. Replace the YModem support with SDP support.
>
> The SDP can be utilized by forcing the board into SDP boot mode
> by grounding test point right next to silkscreen label U30, and
> then by using mfgtools 'uuu -brun spl flash.bin' once the device
> enumerates on host system USB bus. The SDP capable USB port is
> available on the USB micro-B port on the base board.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> NOTE: Would be nice to have in v2025.01

Applied it for master, thanks.