[PATCH] xilinx: zynqmp: Remove conditional check for bootmenu_default variable

[Michal Simek]

From: John Vicky Vykuntapu <johnvicky.vykuntapu at amd.com>

As per bootmenu support added default boot options to CC on AMD CCs and
default to SOM on others.
However, if no secondary boot device is enabled in the design,it should
be the default boot option for SOM when combined with AMD CCs because it
only contains SOM peripherals.
To address this issue, The conditional check for the bootmenu_default
variable was removed, and it has always been set to SOM as the default
boot option.
In this way, users can choose preferred boot options from the bootmenu
based on the boot devices configured in the design for AMD CCs.

Fixes: 61bf0fa8663d ("xilinx: zynqmp: Add bootmenu support")
Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 board/xilinx/zynqmp/zynqmp_kria.env | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
index d0e431ebb46f..927f398c3c38 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -51,8 +51,7 @@ som_mmc_boot=setenv boot_targets mmc0 && run distro_bootcmd
 
 # To disable bootmenu set enable_bootmenu=0
 enable_bootmenu=1
-check_cc_for_default_boot=if test ${card1_name} = SCK-KV-G || test ${card1_name} = SCK-KR-G || test ${card1_name} = SCK-KD-G; then setenv bootmenu_default 1; else setenv bootmenu_default 0; fi
-som_bootmenu=if test ${enable_bootmenu} = 1; then run check_cc_for_default_boot; bootmenu; else run som_mmc_boot; fi
+som_bootmenu=if test ${enable_bootmenu} = 1; then bootmenu; else run som_mmc_boot; fi
 
 k26_starter=SMK-K26-XCL2G
 k24_starter=SMK-K24-XCL2G
-- 
2.43.0