[PATCH v6 25/37] board: emulation: Add QEMU sbsa support
Simon Glass
sjg at chromium.org
Thu Oct 3 15:50:45 CEST 2024
Hi Tom,
On Wed, 2 Oct 2024 at 19:35, Tom Rini <trini at konsulko.com> wrote:
>
> On Wed, Oct 02, 2024 at 04:55:34PM -0600, Simon Glass wrote:
> > Hi Patrick,
> >
> > On Wed, 2 Oct 2024 at 03:52, Patrick Rudolph
> > <patrick.rudolph at 9elements.com> wrote:
> > >
> > > Add support for Arm sbsa [1] v0.3+ that is supported by QEMU [2].
> > >
> > > Unlike other Arm based platforms the machine only provides a minimal
> > > FDT that contains number of CPUs, ammount of memory and machine-version.
> > > The boot firmware has to provide ACPI tables to the OS.
> > > Due to this design a full DTB is added here as well that allows U-Boot's
> > > driver to properly function. The DTB is appended at the end of the U-Boot
> > > image and will be merged with the QEMU provided DTB.
> > >
> > > In addition provide documentation how to use, enable binman to fabricate both
> > > ROMs that are required to boot and add ACPI tables to make it full compatible
> > > to the EDK2 reference implementation.
> > >
> > > The board was tested using Fedora 40 Aarch64 Workstation. It's able
> > > to boot from USB and AHCI or network.
> > >
> > > Tested and found working:
> > > - serial
> > > - PCI
> > > - xHCI
> > > - Bochs display
> > > - AHCI
> > > - network using e1000e
> > > - CPU init
> > > - Booting Fedora 40
> > >
> > > 1: Server Base System Architecture (SBSA)
> > > 2: https://www.qemu.org/docs/master/system/arm/sbsa.html
> > >
> > > Signed-off-by: Patrick Rudolph <patrick.rudolph at 9elements.com>
> > > Cc: Peter Robinson <pbrobinson at gmail.com>
> > > Cc: Simon Glass <sjg at chromium.org>
> > > Cc: Tom Rini <trini at konsulko.com>
> > > ---
> > > Changelog v3:
> > > - Add GIC and GIC-ITS to devicetree
> > > - Select GICv3 driver
> > > - Drop acpi_fill_madt and use driver model instead
> > > Changelog v4:
> > > - Drop CPU platform code
> > > - Enhance the DT to allow MADT generation from DT
> > > Changelog v5:
> > > - Add full DT and place it at the end of U-Boot
> > > - Merge DT with QEMU's DT
> > > - Drop DT generation code
> > > - Fix flash region length
> > > - Drop enable_caches()
> > > - Support platforms that do not pass FDT in x0
> > > Changelog v6:
> > > - Update header order
> > > - Drop pad-byte from DT
> > > - select BINMAN_FDT
> > > - select E1000_NO_NVM
> > > - drop config.h include
> > > - drop a few CFG_ defines that were used for SPL
> > >
> > > ---
> > > arch/arm/Kconfig | 3 +-
> > > arch/arm/dts/qemu-sbsa.dts | 136 ++++++
> > > arch/arm/include/asm/arch-qemu-sbsa/boot0.h | 34 ++
> > > arch/arm/mach-qemu/Kconfig | 36 +-
> > > board/emulation/qemu-arm/MAINTAINERS | 2 +
> > > board/emulation/qemu-sbsa/Kconfig | 57 +++
> > > board/emulation/qemu-sbsa/Makefile | 8 +
> > > board/emulation/qemu-sbsa/acpi.c | 192 ++++++++
> > > board/emulation/qemu-sbsa/dsdt.asl | 483 ++++++++++++++++++++
> > > board/emulation/qemu-sbsa/lowlevel_init.S | 22 +
> > > board/emulation/qemu-sbsa/qemu-sbsa.c | 311 +++++++++++++
> > > board/emulation/qemu-sbsa/qemu-sbsa.env | 14 +
> > > board/emulation/qemu-sbsa/qemu-sbsa.h | 38 ++
> > > board/emulation/qemu-sbsa/smc.c | 71 +++
> > > configs/qemu-arm-sbsa_defconfig | 10 +
> > > doc/board/emulation/index.rst | 1 +
> > > doc/board/emulation/qemu-sbsa.rst | 98 ++++
> > > doc/develop/driver-model/virtio.rst | 1 +
> > > include/configs/qemu-sbsa.h | 95 ++++
> > > 19 files changed, 1605 insertions(+), 7 deletions(-)
> > > create mode 100644 arch/arm/dts/qemu-sbsa.dts
> > > create mode 100644 arch/arm/include/asm/arch-qemu-sbsa/boot0.h
> > > create mode 100644 board/emulation/qemu-sbsa/Kconfig
> > > create mode 100644 board/emulation/qemu-sbsa/Makefile
> > > create mode 100644 board/emulation/qemu-sbsa/acpi.c
> > > create mode 100644 board/emulation/qemu-sbsa/dsdt.asl
> > > create mode 100644 board/emulation/qemu-sbsa/lowlevel_init.S
> > > create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.c
> > > create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.env
> > > create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.h
> > > create mode 100644 board/emulation/qemu-sbsa/smc.c
> > > create mode 100644 configs/qemu-arm-sbsa_defconfig
> > > create mode 100644 doc/board/emulation/qemu-sbsa.rst
> > > create mode 100644 include/configs/qemu-sbsa.h
> >
> > With the tweaks below:
> >
> > Reviewed-by: Simon Glass <sjg at chromium.org>
> >
> > [..]
> >
> > > diff --git a/arch/arm/dts/qemu-sbsa.dts b/arch/arm/dts/qemu-sbsa.dts
> > > new file mode 100644
> > > index 0000000000..f743ea3863
> > > --- /dev/null
> > > +++ b/arch/arm/dts/qemu-sbsa.dts
> > > @@ -0,0 +1,136 @@
> > > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > > +/*
> > > + * Devicetree with onboard devices for qemu_sbsa-ref for internal use only!
> > > + * DO NOT PASS TO THE OS!
> > > + *
> > > + * As QEMU provides only a minimal devicetree this one is merged with
> > > + * it and then fixed at runtime.
> > > + *
> > > + * Copyright 2024 9elements GmbH
> > > + */
> > > +#include "configs/qemu-sbsa.h"
> > > +
> > > +/dts-v1/;
> > > +
> > > +#define MAKE_PROP(x) (x>>32) (x&0xffffffff)
> > > +
> > > +/ {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + interrupt-parent = <&intc>;
> > > + compatible = "linux,sbsa-ref";
> > > +
> > > + binman: binman {
> > > + multiple-images;
> > > + };
> > > +
> > > + cpus {
> > > + /* Filled by fdtdec_board_setup() */
> > > + };
> > > +
> > > + memory {
> > > + /* Filled by fdtdec_board_setup() */
> > > + };
> > > +
> > > + soc {
> > > + compatible = "simple-bus";
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + ranges;
> > > +
> > > + uart0 {
> > > + compatible = "arm,pl011";
> > > + status = "okay";
> > > + reg = <MAKE_PROP(SBSA_UART_BASE_ADDR)
> >
> > Can you use
> >
> > reg = /bits 64/ <0x60000000>
> >
> > instead?
> >
> > Same for those below.
>
> Isn't that less readable ?
Which bit of it is less readable?
But I very much doubt upstream would accept it with a macro. Other
64-bit boards seem to use '/bits/ 64'.
Regards,
SImon
More information about the U-Boot
mailing list