[PATCH 3/4] serial: add build-time sanity check of CONFIG_SERIAL_RX_BUFFER_SIZE

[Rasmus Villemoes]

The help text says it must be a power of 2, and the implementation
does rely on that. Enforce it.

A violation gives a wall of text, but the last few lines should be
reasonably obvious:

drivers/serial/serial-uclass.c:334:9: note: in expansion of macro ‘BUILD_BUG_ON_NOT_POWER_OF_2’
  334 |         BUILD_BUG_ON_NOT_POWER_OF_2(CONFIG_SERIAL_RX_BUFFER_SIZE);

Signed-off-by: Rasmus Villemoes <ravi at prevas.dk>
---
 drivers/serial/serial-uclass.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 28d7a202afc..484f0f7d3e8 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -18,6 +18,7 @@
 #include <dm/lists.h>
 #include <dm/device-internal.h>
 #include <dm/of_access.h>
+#include <linux/build_bug.h>
 #include <linux/delay.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -330,6 +331,8 @@ static int _serial_tstc(struct udevice *dev)
 	struct serial_dev_priv *upriv = dev_get_uclass_priv(dev);
 	uint wr, avail;
 
+	BUILD_BUG_ON_NOT_POWER_OF_2(CONFIG_SERIAL_RX_BUFFER_SIZE);
+
 	/* Read all available chars into the RX buffer while there's room */
 	avail = CONFIG_SERIAL_RX_BUFFER_SIZE - (upriv->wr_ptr - upriv->rd_ptr);
 	while (avail-- && __serial_tstc(dev)) {
-- 
2.46.2