[PATCH v11 14/29] lwip: tftp: bind to TFTP port only when in server mode

[Jerome Forissier]

The TFTP app should not bind to the TFTP server port when configured as
a client. Instead, the local port should be chosen from the dynamic
range (49152 ~ 65535) so that if the application is stopped and started
again, the remote server will not consider the new packets as part of
the same context (which would cause an error since a new RRQ would be
unexpected).

Signed-off-by: Jerome Forissier <jerome.forissier at linaro.org>
---
 lib/lwip/lwip/src/apps/tftp/tftp.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/lib/lwip/lwip/src/apps/tftp/tftp.c b/lib/lwip/lwip/src/apps/tftp/tftp.c
index ddfdbfc0c1b..74fc1fbe586 100644
--- a/lib/lwip/lwip/src/apps/tftp/tftp.c
+++ b/lib/lwip/lwip/src/apps/tftp/tftp.c
@@ -454,10 +454,12 @@ tftp_init_common(u8_t mode, const struct tftp_context *ctx)
     return ERR_MEM;
   }
 
-  ret = udp_bind(pcb, IP_ANY_TYPE, TFTP_PORT);
-  if (ret != ERR_OK) {
-    udp_remove(pcb);
-    return ret;
+  if (mode == LWIP_TFTP_MODE_SERVER) {
+    ret = udp_bind(pcb, IP_ANY_TYPE, TFTP_PORT);
+    if (ret != ERR_OK) {
+      udp_remove(pcb);
+      return ret;
+    }
   }
 
   tftp_state.handle    = NULL;
-- 
2.40.1