[PATCH v6 14/37] efi_loader: Allocate and write ACPI tables
Ilias Apalodimas
ilias.apalodimas at linaro.org
Thu Oct 3 17:58:49 CEST 2024
Hi Simon,
On Thu, 3 Oct 2024 at 16:49, Simon Glass <sjg at chromium.org> wrote:
>
> Hi Ilias,
>
> On Wed, 2 Oct 2024 at 23:45, Ilias Apalodimas
> <ilias.apalodimas at linaro.org> wrote:
> >
> > Hi Patrick,
> >
> > We've been back and forth on this, but we still disagree on the
> > allocations etc, but I don't think it's that important to keep the
> > patch out due to this.
> >
> > Can we move the table generation to the ACPI subsystem?
> > efi_acpi_register() will convert the memory as needed, so I was
> > wondering why the creation itself can't be done there. If you simply
> > fill table_start_high/table_end_hi, EFI will install the config tables
> > properly
>
> Yes, that's a good idea. The whole function can just move to
> lib/acpi/acpi_writer.c perhaps?
I haven't chedk the ACPI stuff to have an opinion. The description on
that file matches that
Regards
/Ilias
>
> Regards,
> SImon
>
> >
> > Thanks
> > /Ilias
> >
> > On Wed, 2 Oct 2024 at 12:52, Patrick Rudolph
> > <patrick.rudolph at 9elements.com> wrote:
> > >
> > > Allocate memory for ACPI tables inside the efi_loader and write out
> > > the tables similar to SMBIOS tables. When ACPI is enabled and wasn't
> > > installed in other places, install the ACPI table in EFI. Since EFI
> > > is necessary to pass the ACPI table location when FDT isn't used,
> > > there's no need to install it separately.
> > >
> > > When CONFIG_BLOBLIST_TABLES is set the tables will be stored in a
> > > bloblist. The tables are still passed to the OS using EFI.
> > >
> > > This allows non x86 platforms to boot using ACPI only in case the
> > > EFI loader is being used.
> > >
> > > TEST: Booted QEMU SBSA (no QFW) using EFI and ACPI only.
> > >
> > > Signed-off-by: Patrick Rudolph <patrick.rudolph at 9elements.com>
> > > Cc: Simon Glass <sjg at chromium.org>
> > > Cc: Tom Rini <trini at konsulko.com>
> > > ---
> > > Changelog v3:
> > > - Drop memalign and use efi_allocate_pages
> > > - Use log_debug instead of debug
> > > - Clarify commit message
> > > - Skip writing ACPI tables on sandbox
> > > - Rename function
> > > - Add function comment
> > >
> > > Changelog v6:
> > > - Update header order
> > >
> > > ---
> > > lib/efi_loader/efi_acpi.c | 76 ++++++++++++++++++++++++++++++++
> > > test/py/tests/test_event_dump.py | 1 +
> > > 2 files changed, 77 insertions(+)
> > >
> > > diff --git a/lib/efi_loader/efi_acpi.c b/lib/efi_loader/efi_acpi.c
> > > index 67bd7f8ca2..c11abe17b6 100644
> > > --- a/lib/efi_loader/efi_acpi.c
> > > +++ b/lib/efi_loader/efi_acpi.c
> > > @@ -6,15 +6,23 @@
> > > */
> > >
> > > #include <efi_loader.h>
> > > +#include <bloblist.h>
> > > #include <log.h>
> > > +#include <malloc.h>
> > > #include <mapmem.h>
> > > #include <acpi/acpi_table.h>
> > > #include <asm/global_data.h>
> > > +#include <asm/io.h>
> > > +#include <linux/sizes.h>
> > > +#include <linux/log2.h>
> > >
> > > DECLARE_GLOBAL_DATA_PTR;
> > >
> > > static const efi_guid_t acpi_guid = EFI_ACPI_TABLE_GUID;
> > >
> > > +enum {
> > > + TABLE_SIZE = SZ_64K,
> > > +};
> > > /*
> > > * Install the ACPI table as a configuration table.
> > > *
> > > @@ -47,3 +55,71 @@ efi_status_t efi_acpi_register(void)
> > > return efi_install_configuration_table(&acpi_guid,
> > > (void *)(ulong)addr);
> > > }
> > > +
> > > +/*
> > > + * Allocate memory for ACPI tables and write ACPI tables to the
> > > + * allocated buffer.
> > > + *
> > > + * Return: status code
> > > + */
> > > +static int alloc_write_acpi_tables(void)
> > > +{
> > > + u64 table_addr, table_end;
> > > + u64 new_acpi_addr = 0;
> > > + efi_uintn_t pages;
> > > + efi_status_t ret;
> > > + void *addr;
> > > +
> > > + if (!IS_ENABLED(CONFIG_GENERATE_ACPI_TABLE))
> > > + return 0;
> > > +
> > > + if (IS_ENABLED(CONFIG_X86) ||
> > > + IS_ENABLED(CONFIG_QFW_ACPI) ||
> > > + IS_ENABLED(CONFIG_SANDBOX)) {
> > > + log_debug("Skipping writing ACPI tables as already done\n");
> > > + return 0;
> > > + }
> > > +
> > > + /* Align the table to a 4KB boundary to keep EFI happy */
> > > + if (IS_ENABLED(CONFIG_BLOBLIST_TABLES)) {
> > > + addr = bloblist_add(BLOBLISTT_ACPI_TABLES, TABLE_SIZE,
> > > + ilog2(SZ_4K));
> > > +
> > > + if (!addr)
> > > + return log_msg_ret("mem", -ENOMEM);
> > > + } else {
> > > + pages = efi_size_in_pages(TABLE_SIZE);
> > > +
> > > + ret = efi_allocate_pages(EFI_ALLOCATE_ANY_PAGES,
> > > + EFI_ACPI_RECLAIM_MEMORY,
> > > + pages, &new_acpi_addr);
> > > + if (ret != EFI_SUCCESS)
> > > + return log_msg_ret("mem", -ENOMEM);
> > > +
> > > + addr = (void *)(uintptr_t)new_acpi_addr;
> > > + }
> > > +
> > > + table_addr = virt_to_phys(addr);
> > > +
> > > + gd->arch.table_start_high = table_addr;
> > > +
> > > + table_end = write_acpi_tables(table_addr);
> > > + if (!table_end) {
> > > + log_err("Can't create ACPI configuration table\n");
> > > + return -EINTR;
> > > + }
> > > +
> > > + log_debug("- wrote 'acpi' to %llx, end %llx\n", table_addr, table_end);
> > > + if (table_end - table_addr > TABLE_SIZE) {
> > > + log_err("Out of space for configuration tables: need %llx, have %x\n",
> > > + table_end - table_addr, TABLE_SIZE);
> > > + return log_msg_ret("acpi", -ENOSPC);
> > > + }
> > > + gd->arch.table_end_high = table_end;
> > > +
> > > + log_debug("- done writing tables\n");
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, alloc_write_acpi_tables);
> > > diff --git a/test/py/tests/test_event_dump.py b/test/py/tests/test_event_dump.py
> > > index e282c67335..459bfa26bb 100644
> > > --- a/test/py/tests/test_event_dump.py
> > > +++ b/test/py/tests/test_event_dump.py
> > > @@ -18,6 +18,7 @@ def test_event_dump(u_boot_console):
> > > -------------------- ------------------------------ ------------------------------
> > > EVT_FT_FIXUP bootmeth_vbe_ft_fixup .*boot/vbe_request.c:.*
> > > EVT_FT_FIXUP bootmeth_vbe_simple_ft_fixup .*boot/vbe_simple_os.c:.*
> > > +EVT_LAST_STAGE_INIT alloc_write_acpi_tables .*lib/efi_loader/efi_acpi.c:.*
> > > EVT_LAST_STAGE_INIT install_smbios_table .*lib/efi_loader/efi_smbios.c:.*
> > > EVT_MISC_INIT_F sandbox_early_getopt_check .*arch/sandbox/cpu/start.c:.*
> > > EVT_TEST h_adder_simple .*test/common/event.c:'''
> > > --
> > > 2.46.2
> > >
More information about the U-Boot
mailing list