[PATCH v1] imx: Kconfig: make IMX8_ROMAPI configurable

[Marek Vasut]

On 10/6/24 11:23 PM, Tom Rini wrote:
> On Sun, Oct 06, 2024 at 07:31:16AM +0800, alice.guo at oss.nxp.com wrote:
> 
>> From: Peng Fan <peng.fan at nxp.com>
>>
>> Make CONFIG_IMX8_ROMAPI could be configured in defconfig.
>>
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> Signed-off-by: Alice Guo <alice.guo at nxp.com>
>> Reviewed-by: Ye Li <ye.li at nxp.com>
>> ---
>>   arch/arm/mach-imx/Kconfig | 3 ++-
>>   1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
>> index 134e42028c..9d3aafd2f8 100644
>> --- a/arch/arm/mach-imx/Kconfig
>> +++ b/arch/arm/mach-imx/Kconfig
>> @@ -179,7 +179,8 @@ config DDRMC_VF610_CALIBRATION
>>   	  the ddrmc_cr_setting on relevant board file.
>>   
>>   config IMX8_ROMAPI
>> -	def_bool y
>> +	bool "Enable i.MX ROMAPI"
>> +	default y
>>   	depends on IMX8MN || IMX8MP || IMX8ULP || IMX9
> 
> Since there's no help here, is this truly configurable, or is this
> something that should be select'd based on the SoC and presumably some
> of the newer IMX9 parts cannot use this?
I can imagine the MX95 calls into this custom ELE firmware stuff instead 
of ROMAPI ?