[PATCH v2 2/2] arm64: dts: imx: Switch to using upstream DT on DH i.MX8MP DHCOM PDK2/PDK3
Sumit Garg
sumit.garg at linaro.org
Mon Oct 7 12:09:03 CEST 2024
On Sat, 5 Oct 2024 at 06:43, Marek Vasut <marex at denx.de> wrote:
>
> Enable OF_UPSTREAM to use upstream DT and add freescale/ prefix to the
> DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
> including *-u-boot.dtsi and DTBOs from arch/$(ARCH)/dts/ directory.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Caleb Connolly <caleb.connolly at linaro.org>
> Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Heinrich Schuchardt <xypron.glpk at gmx.de>
> Cc: Jonas Karlman <jonas at kwiboo.se>
> Cc: Lothar Rubusch <l.rubusch at gmail.com>
> Cc: Michal Simek <michal.simek at amd.com>
> Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> Cc: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Sumit Garg <sumit.garg at linaro.org>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: u-boot at dh-electronics.com
> Cc: u-boot at lists.denx.de
> ---
> V2: Enable CONFIG_OF_UPSTREAM_INCLUDE_LOCAL_FALLBACK_DTBOS
> ---
> arch/arm/dts/Makefile | 2 -
> arch/arm/dts/imx8mp-dhcom-pdk2.dts | 158 --------------
> arch/arm/dts/imx8mp-dhcom-pdk3.dts | 317 ----------------------------
> configs/imx8mp_dhcom_pdk2_defconfig | 6 +-
> configs/imx8mp_dhcom_pdk3_defconfig | 6 +-
> 5 files changed, 8 insertions(+), 481 deletions(-)
> delete mode 100644 arch/arm/dts/imx8mp-dhcom-pdk2.dts
> delete mode 100644 arch/arm/dts/imx8mp-dhcom-pdk3.dts
>
Reviewed-by: Sumit Garg <sumit.garg at linaro.org>
-Sumit
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 83e38f0352a..ed97e1c26de 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -969,8 +969,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
> imx8mp-dhcom-pdk-overlay-eth2xfast.dtbo \
> imx8mp-debix-model-a.dtb \
> imx8mp-dhcom-drc02.dtb \
> - imx8mp-dhcom-pdk2.dtb \
> - imx8mp-dhcom-pdk3.dtb \
> imx8mp-dhcom-pdk3-overlay-rev100.dtbo \
> imx8mp-dhcom-picoitx.dtb \
> imx8mp-icore-mx8mp-edimm2.2.dtb \
> diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2.dts b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
> deleted file mode 100644
> index 8f4eff37c40..00000000000
> --- a/arch/arm/dts/imx8mp-dhcom-pdk2.dts
> +++ /dev/null
> @@ -1,158 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (C) 2022 Marek Vasut <marex at denx.de>
> - *
> - * DHCOM iMX8MP variant:
> - * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
> - * DHCOM PCB number: 660-100 or newer
> - * PDK2 PCB number: 516-400 or newer
> - */
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/phy/phy-imx8-pcie.h>
> -#include "imx8mp-dhcom-som.dtsi"
> -
> -/ {
> - model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
> - compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
> - "fsl,imx8mp";
> -
> - chosen {
> - stdout-path = &uart1;
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - button-0 {
> - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
> - label = "TA1-GPIO-A";
> - linux,code = <KEY_A>;
> - pinctrl-0 = <&pinctrl_dhcom_a>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> -
> - button-1 {
> - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
> - label = "TA2-GPIO-B";
> - linux,code = <KEY_B>;
> - pinctrl-0 = <&pinctrl_dhcom_b>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> -
> - button-2 {
> - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
> - label = "TA3-GPIO-C";
> - linux,code = <KEY_C>;
> - pinctrl-0 = <&pinctrl_dhcom_c>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> -
> - button-3 {
> - gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */
> - label = "TA4-GPIO-D";
> - linux,code = <KEY_D>;
> - pinctrl-0 = <&pinctrl_dhcom_d>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> - };
> -
> - led {
> - compatible = "gpio-leds";
> -
> - led-0 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
> - pinctrl-0 = <&pinctrl_dhcom_e>;
> - pinctrl-names = "default";
> - };
> -
> - led-1 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
> - pinctrl-0 = <&pinctrl_dhcom_f>;
> - pinctrl-names = "default";
> - };
> -
> - led-2 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
> - pinctrl-0 = <&pinctrl_dhcom_h>;
> - pinctrl-names = "default";
> - };
> -
> - led-3 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
> - pinctrl-0 = <&pinctrl_dhcom_i>;
> - pinctrl-names = "default";
> - };
> - };
> -};
> -
> -&fec { /* Second ethernet */
> - pinctrl-0 = <&pinctrl_fec_rgmii>;
> - phy-handle = <ðphypdk>;
> - phy-mode = "rgmii";
> -
> - mdio {
> - ethphypdk: ethernet-phy at 7 { /* KSZ 9021 */
> - compatible = "ethernet-phy-ieee802.3-c22";
> - pinctrl-0 = <&pinctrl_ethphy1>;
> - pinctrl-names = "default";
> - interrupt-parent = <&gpio4>;
> - interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> - max-speed = <100>;
> - reg = <7>;
> - reset-assert-us = <1000>;
> - reset-deassert-us = <1000>;
> - reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
> - rxc-skew-ps = <3000>;
> - rxd0-skew-ps = <0>;
> - rxd1-skew-ps = <0>;
> - rxd2-skew-ps = <0>;
> - rxd3-skew-ps = <0>;
> - rxdv-skew-ps = <0>;
> - txc-skew-ps = <3000>;
> - txd0-skew-ps = <0>;
> - txd1-skew-ps = <0>;
> - txd2-skew-ps = <0>;
> - txd3-skew-ps = <0>;
> - txen-skew-ps = <0>;
> - };
> - };
> -};
> -
> -&flexcan1 {
> - status = "okay";
> -};
> -
> -&usb3_1 {
> - fsl,over-current-active-low;
> -};
> -
> -&iomuxc {
> - /*
> - * GPIO_A,B,C,D are connected to buttons.
> - * GPIO_E,F,H,I are connected to LEDs.
> - * GPIO_M is connected to CLKOUT2.
> - */
> - pinctrl-0 = <&pinctrl_hog_base
> - &pinctrl_dhcom_g &pinctrl_dhcom_j
> - &pinctrl_dhcom_k &pinctrl_dhcom_l
> - &pinctrl_dhcom_int>;
> -};
> diff --git a/arch/arm/dts/imx8mp-dhcom-pdk3.dts b/arch/arm/dts/imx8mp-dhcom-pdk3.dts
> deleted file mode 100644
> index 867d238f2b5..00000000000
> --- a/arch/arm/dts/imx8mp-dhcom-pdk3.dts
> +++ /dev/null
> @@ -1,317 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * Copyright (C) 2023 Marek Vasut <marex at denx.de>
> - *
> - * DHCOM iMX8MP variant:
> - * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
> - * DHCOM PCB number: 660-100 or newer
> - * PDK3 PCB number: 669-100 or newer
> - */
> -
> -/dts-v1/;
> -
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/phy/phy-imx8-pcie.h>
> -#include "imx8mp-dhcom-som.dtsi"
> -
> -/ {
> - model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
> - compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
> - "fsl,imx8mp";
> -
> - chosen {
> - stdout-path = &uart1;
> - };
> -
> - clk_ext_audio_codec: clock-codec {
> - #clock-cells = <0>;
> - clock-frequency = <24000000>;
> - compatible = "fixed-clock";
> - };
> -
> - clk_xtal25: clk-xtal25 {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <25000000>;
> - };
> -
> - connector {
> - compatible = "usb-c-connector";
> - label = "USB-C";
> - data-role = "dual";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 0 {
> - reg = <0>;
> -
> - usb_c_0_hs_ep: endpoint {
> - remote-endpoint = <&dwc3_0_hs_ep>;
> - };
> - };
> -
> - port at 1 {
> - reg = <1>;
> -
> - usb_c_0_ss_ep: endpoint {
> - remote-endpoint = <&ptn5150_in_ep>;
> - };
> - };
> - };
> - };
> -
> - gpio-keys {
> - compatible = "gpio-keys";
> -
> - button-0 {
> - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
> - label = "TA1-GPIO-A";
> - linux,code = <KEY_A>;
> - pinctrl-0 = <&pinctrl_dhcom_a>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> -
> - button-1 {
> - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
> - label = "TA2-GPIO-B";
> - linux,code = <KEY_B>;
> - pinctrl-0 = <&pinctrl_dhcom_b>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> -
> - button-2 {
> - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
> - label = "TA3-GPIO-C";
> - linux,code = <KEY_C>;
> - pinctrl-0 = <&pinctrl_dhcom_c>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> -
> - button-3 {
> - gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
> - label = "TA4-GPIO-E";
> - linux,code = <KEY_E>;
> - pinctrl-0 = <&pinctrl_dhcom_e>;
> - pinctrl-names = "default";
> - wakeup-source;
> - };
> - };
> -
> - led {
> - compatible = "gpio-leds";
> -
> - led-0 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <0>;
> - gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
> - pinctrl-0 = <&pinctrl_dhcom_d>;
> - pinctrl-names = "default";
> - };
> -
> - led-1 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <1>;
> - gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
> - pinctrl-0 = <&pinctrl_dhcom_f>;
> - pinctrl-names = "default";
> - };
> -
> - led-2 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <2>;
> - gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
> - pinctrl-0 = <&pinctrl_dhcom_g>;
> - pinctrl-names = "default";
> - };
> -
> - led-3 {
> - color = <LED_COLOR_ID_GREEN>;
> - default-state = "off";
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <3>;
> - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
> - pinctrl-0 = <&pinctrl_dhcom_i>;
> - pinctrl-names = "default";
> - };
> - };
> -
> - reg_avdd: regulator-avdd { /* AUDIO_VDD */
> - compatible = "regulator-fixed";
> - regulator-always-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "AUDIO_VDD";
> - };
> -};
> -
> -&i2c5 {
> - i2cmux at 70 {
> - compatible = "nxp,pca9540";
> - reg = <0x70>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - i2cmuxed0: i2c at 0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0>;
> -
> - typec at 3d {
> - compatible = "nxp,ptn5150";
> - reg = <0x3d>;
> - interrupt-parent = <&gpio4>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ptn5150>;
> - status = "okay";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 0 {
> - reg = <0>;
> -
> - ptn5150_in_ep: endpoint {
> - remote-endpoint = <&usb_c_0_ss_ep>;
> - };
> - };
> -
> - port at 1 {
> - reg = <1>;
> -
> - ptn5150_out_ep: endpoint {
> - remote-endpoint = <&dwc3_0_ss_ep>;
> - };
> - };
> - };
> - };
> -
> - power-sensor at 40 {
> - compatible = "ti,ina238";
> - reg = <0x40>;
> - shunt-resistor = <20000>; /* 0.02 R */
> - ti,shunt-gain = <1>; /* Drop cca. 40mV */
> - };
> -
> - eeprom_board: eeprom at 54 {
> - compatible = "atmel,24c04";
> - pagesize = <16>;
> - reg = <0x54>;
> - };
> -
> - pcieclk: clk at 6b {
> - compatible = "skyworks,si52144";
> - reg = <0x6b>;
> - clocks = <&clk_xtal25>;
> - #clock-cells = <1>;
> - };
> - };
> -
> - i2cmuxed1: i2c at 1 { /* HDMI DDC I2C */
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <1>;
> - };
> - };
> -};
> -
> -&fec { /* Second ethernet */
> - pinctrl-0 = <&pinctrl_fec_rgmii>;
> - phy-handle = <ðphypdk>;
> - phy-mode = "rgmii-id";
> -
> - mdio {
> - ethphypdk: ethernet-phy at 7 { /* Micrel KSZ9131RNXI */
> - compatible = "ethernet-phy-id0022.1642",
> - "ethernet-phy-ieee802.3-c22";
> - interrupt-parent = <&gpio4>;
> - interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> - pinctrl-0 = <&pinctrl_ethphy1>;
> - pinctrl-names = "default";
> - reg = <7>;
> - reset-assert-us = <1000>;
> - /* RESET_N signal rise time ~100ms */
> - reset-deassert-us = <120000>;
> - reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
> - status = "okay";
> - };
> - };
> -};
> -
> -&flexcan1 {
> - status = "okay";
> -};
> -
> -&pcie_phy {
> - clocks = <&pcieclk 1>;
> - clock-names = "ref";
> - fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> - status = "okay";
> -};
> -
> -&pcie {
> - fsl,max-link-speed = <3>;
> - reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
> - status = "okay";
> -};
> -
> -&usb_dwc3_0 {
> - usb-role-switch;
> -
> - port {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - dwc3_0_hs_ep: endpoint at 0 {
> - reg = <0>;
> - remote-endpoint = <&usb_c_0_hs_ep>;
> - };
> -
> - dwc3_0_ss_ep: endpoint at 1 {
> - reg = <1>;
> - remote-endpoint = <&ptn5150_out_ep>;
> - };
> - };
> -};
> -
> -&usb3_1 {
> - fsl,disable-port-power-control;
> - fsl,permanently-attached;
> -};
> -
> -&usb_dwc3_1 {
> - /* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
> - /delete-property/ pinctrl-names;
> - /delete-property/ pinctrl-0;
> -};
> -
> -&iomuxc {
> - /*
> - * GPIO_A,B,C,E are connected to buttons.
> - * GPIO_D,F,G,I are connected to LEDs.
> - * GPIO_H is connected to USB Hub RESET_N.
> - * GPIO_M is connected to CLKOUT2.
> - */
> - pinctrl-0 = <&pinctrl_hog_base
> - &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
> - &pinctrl_dhcom_l
> - &pinctrl_dhcom_int>;
> -
> - pinctrl_ptn5150: ptn5150grp {
> - fsl,pins = <
> - MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40000000
> - >;
> - };
> -};
> diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
> index f807b0cfc37..d527ca92c83 100644
> --- a/configs/imx8mp_dhcom_pdk2_defconfig
> +++ b/configs/imx8mp_dhcom_pdk2_defconfig
> @@ -12,7 +12,7 @@ CONFIG_ENV_SIZE=0x10000
> CONFIG_ENV_OFFSET=0xFE0000
> CONFIG_ENV_SECT_SIZE=0x1000
> CONFIG_DM_GPIO=y
> -CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk2"
> +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-dhcom-pdk2"
> CONFIG_SPL_TEXT_BASE=0x920000
> CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
> CONFIG_DM_RESET=y
> @@ -48,7 +48,7 @@ CONFIG_USE_BOOTARGS=y
> CONFIG_USE_BOOTCOMMAND=y
> CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
> CONFIG_USE_PREBOOT=y
> -CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk2.dtb"
> +CONFIG_DEFAULT_FDT_FILE="freescale/imx8mp-dhcom-pdk2.dtb"
> CONFIG_SYS_CBSIZE=2048
> CONFIG_SYS_PBSIZE=2081
> CONFIG_CONSOLE_MUX=y
> @@ -144,6 +144,8 @@ CONFIG_MMC_SPEED_MODE_SET=y
> CONFIG_PARTITION_TYPE_GUID=y
> CONFIG_OF_CONTROL=y
> CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_UPSTREAM=y
> +CONFIG_OF_UPSTREAM_INCLUDE_LOCAL_FALLBACK_DTBOS=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_NOWHERE=y
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig
> index 05895d6dd6f..5a41f140bb5 100644
> --- a/configs/imx8mp_dhcom_pdk3_defconfig
> +++ b/configs/imx8mp_dhcom_pdk3_defconfig
> @@ -12,7 +12,7 @@ CONFIG_ENV_SIZE=0x10000
> CONFIG_ENV_OFFSET=0xFE0000
> CONFIG_ENV_SECT_SIZE=0x1000
> CONFIG_DM_GPIO=y
> -CONFIG_DEFAULT_DEVICE_TREE="imx8mp-dhcom-pdk3"
> +CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-dhcom-pdk3"
> CONFIG_SPL_TEXT_BASE=0x920000
> CONFIG_TARGET_IMX8MP_DH_DHCOM_PDK2=y
> CONFIG_DM_RESET=y
> @@ -50,7 +50,7 @@ CONFIG_USE_BOOTCOMMAND=y
> CONFIG_BOOTCOMMAND="run dh_update_env distro_bootcmd ; reset"
> CONFIG_USE_PREBOOT=y
> CONFIG_PREBOOT="gpio clear GPIO1_11 ; sleep 0.1 ; gpio set GPIO1_11 ; sleep 0.1 ; i2c dev 4 && i2c mw 0x70 0 4 && i2c probe 0x2d && i2c mw 0x2d 0xaa55.2 0"
> -CONFIG_DEFAULT_FDT_FILE="imx8mp-dhcom-pdk3.dtb"
> +CONFIG_DEFAULT_FDT_FILE="freescale/imx8mp-dhcom-pdk3.dtb"
> CONFIG_SYS_CBSIZE=2048
> CONFIG_SYS_PBSIZE=2081
> CONFIG_CONSOLE_MUX=y
> @@ -147,6 +147,8 @@ CONFIG_MMC_SPEED_MODE_SET=y
> CONFIG_PARTITION_TYPE_GUID=y
> CONFIG_OF_CONTROL=y
> CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_UPSTREAM=y
> +CONFIG_OF_UPSTREAM_INCLUDE_LOCAL_FALLBACK_DTBOS=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_NOWHERE=y
> CONFIG_ENV_IS_IN_SPI_FLASH=y
> --
> 2.45.2
>
More information about the U-Boot
mailing list