[PATCH] video: meson: dw-hdmi: do not fail probe if HDMI regulator is already enabled

[Jonas Karlman]

Hi Neil,

On 2024-10-08 14:58, Neil Armstrong wrote:
> If the regulator is already enabled, this happens if the regulator
> is set in regulator-always-on, regulator_set_enable() return -EALREADY.
> 
> Ignore the -EALREADY return since it's not an error.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>  drivers/video/meson/meson_dw_hdmi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/meson/meson_dw_hdmi.c b/drivers/video/meson/meson_dw_hdmi.c
> index 587df7beb9b..ee219ce6ec4 100644
> --- a/drivers/video/meson/meson_dw_hdmi.c
> +++ b/drivers/video/meson/meson_dw_hdmi.c
> @@ -419,7 +419,7 @@ static int meson_dw_hdmi_probe(struct udevice *dev)
>  
>  	if (!ret) {
>  		ret = regulator_set_enable(supply, true);
> -		if (ret)
> +		if (ret && ret != -EALREADY)

You could possible relax this further using something like:

  ret = regulator_set_enable_if_allowed(supply, true);
  if (ret && ret != -ENOSYS)

That way you only reach the error state when there is an error with
supply, for other states e.g. when supply is not found, DM_REGULATOR=n
or the regulator is already enabled will be treated as success (ret=0).

Regards,
Jonas

>  			return ret;
>  	}
>  #endif
> 
> ---
> base-commit: 28dc47038edc4e93f32d75a357131bcf01a18d85
> change-id: 20241008-u-boot-video-fix-hdmi-supply-already-on-e6a9af27b1eb
> 
> Best regards,