[PATCH v2 0/4] mtd: rawnand: brcmnand: Add BCMBCA support

[Linus Walleij]

This adds support for the NAND controller on the Broadcom
BCA (Broadband Access) platforms.

This requires the series with brcmnand fixes that I sent
separately to be merged first. See:
https://patchwork.ozlabs.org/project/uboot/list/?series=424109

The development was done on the Genexis XG6846B which is
a derivative of the BCM96846 reference design, but probably
has a different flash layout, be sure to check the last
patch in the series for a comment on that.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
Changes in v2:
- Switch to using OF_UPSTREAM instead of syncing DTS files.
- Mention the Linux version the BCMBCA NAND driver is based on.
- Link to v1: https://lore.kernel.org/r/20240930-bcmbca-nand-support-v1-0-e637c65de947@linaro.org

---
Linus Walleij (4):
      mtd: rawnand: brcmnand: Add BCMBCA RAW NAND driver
      drivers: nand: bcmbca: Enable on BCM6846
      board: bcm96846: Enable NAND options
      board: bcm96846: Switch to using OF_UPSTREAM

 arch/arm/dts/bcm6846.dtsi                   | 103 -------------------
 arch/arm/dts/bcm96846.dts                   |  30 ------
 arch/arm/mach-bcmbca/bcm6846/Kconfig        |   4 +
 configs/bcm96846_defconfig                  |  15 ++-
 drivers/mtd/nand/raw/Kconfig                |   7 ++
 drivers/mtd/nand/raw/brcmnand/Makefile      |   1 +
 drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c | 152 ++++++++++++++++++++++++++++
 7 files changed, 178 insertions(+), 134 deletions(-)
---
base-commit: a404065479be2c1fe1167c3c91367e8194a69d1b
change-id: 20240930-bcmbca-nand-support-4447e176bbbd

Best regards,
-- 
Linus Walleij <linus.walleij at linaro.org>