[PATCH v5 3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver
Minda Chen
minda.chen at starfivetech.com
Sat Oct 12 05:13:23 CEST 2024
Add Starfive JH7110 PCIe 2.0 PHY driver, which is generic
PHY driver and can be used as USB 3.0 driver.
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
---
drivers/phy/starfive/Kconfig | 7 +
drivers/phy/starfive/Makefile | 1 +
drivers/phy/starfive/phy-jh7110-pcie.c | 239 +++++++++++++++++++++++++
3 files changed, 247 insertions(+)
create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
index a7cf0a55dff..d11338ed484 100644
--- a/drivers/phy/starfive/Kconfig
+++ b/drivers/phy/starfive/Kconfig
@@ -4,6 +4,13 @@
menu "Starfive PHY driver"
+config PHY_STARFIVE_JH7110_PCIE
+ bool "Starfive JH7110 PCIe 2.0 PHY driver"
+ depends on PHY
+ help
+ Enable this to support the Starfive JH7110 PCIE 2.0/USB 3.0 PHY.
+ Generic PHY driver JH7110 USB 3.0/ PCIe 2.0.
+
config PHY_STARFIVE_JH7110_USB2
bool "Starfive JH7110 USB 2.0 PHY driver"
depends on PHY
diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile
index a405a75e34c..82f25aa21b7 100644
--- a/drivers/phy/starfive/Makefile
+++ b/drivers/phy/starfive/Makefile
@@ -3,4 +3,5 @@
# Copyright (C) 2023 Starfive
#
+obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o
obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o
diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
new file mode 100644
index 00000000000..ecb04bdedfa
--- /dev/null
+++ b/drivers/phy/starfive/phy-jh7110-pcie.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive JH7110 PCIe 2.0 PHY driver
+ *
+ * Copyright (C) 2024 StarFive Technology Co., Ltd.
+ * Author: Minda Chen <minda.chen at starfivetech.com>
+ */
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <errno.h>
+#include <generic-phy.h>
+#include <regmap.h>
+#include <soc.h>
+#include <syscon.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+
+#include "phy-jh7110-usb-syscon.h"
+
+#define PCIE_KVCO_LEVEL_OFF 0x28
+#define PCIE_USB3_PHY_PLL_CTL_OFF 0x7c
+#define PCIE_USB3_PHY_SS_MODE BIT(4)
+#define PCIE_KVCO_TUNE_SIGNAL_OFF 0x80
+#define PHY_KVCO_FINE_TUNE_LEVEL 0x91
+#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc
+
+#define PCIE_USB3_PHY_MODE 0x1
+#define PCIE_BUS_WIDTH 0x2
+#define PCIE_USB3_PHY_ENABLE 0x1
+#define PCIE_USB3_PHY_SPLIT 0x1
+
+struct jh7110_pcie_phy {
+ struct phy *phy;
+ struct regmap *stg_syscon;
+ struct regmap *sys_syscon;
+ void __iomem *regs;
+ struct regmap_field *phy_mode;
+ struct regmap_field *bus_width;
+ struct regmap_field *usb3_phy_en;
+ struct regmap_field *usb_split;
+ enum phy_mode mode;
+};
+
+static int phy_pcie_mode_set(struct jh7110_pcie_phy *data, bool usb_mode)
+{
+ unsigned int phy_mode, width, usb3_phy, ss_mode, split;
+
+ /* default is PCIe mode */
+ if (!data->stg_syscon || !data->sys_syscon) {
+ if (usb_mode) {
+ dev_err(data->phy->dev, "doesn't support USB3 mode\n");
+ return -EINVAL;
+ }
+ return 0;
+ }
+
+ if (usb_mode) {
+ phy_mode = PCIE_USB3_PHY_MODE;
+ width = 0;
+ usb3_phy = PCIE_USB3_PHY_ENABLE;
+ ss_mode = PCIE_USB3_PHY_SS_MODE;
+ split = 0;
+ } else {
+ phy_mode = 0;
+ width = PCIE_BUS_WIDTH;
+ usb3_phy = 0;
+ ss_mode = 0;
+ split = PCIE_USB3_PHY_SPLIT;
+ }
+
+ regmap_field_write(data->phy_mode, phy_mode);
+ regmap_field_write(data->bus_width, width);
+ regmap_field_write(data->usb3_phy_en, usb3_phy);
+ clrsetbits_le32(data->regs + PCIE_USB3_PHY_PLL_CTL_OFF,
+ PCIE_USB3_PHY_SS_MODE, ss_mode);
+ regmap_field_write(data->usb_split, split);
+
+ return 0;
+}
+
+static void phy_kvco_gain_set(struct jh7110_pcie_phy *phy)
+{
+ /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */
+ writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF);
+ writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF);
+}
+
+static int jh7110_pcie_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct udevice *dev = phy->dev;
+ struct jh7110_pcie_phy *pcie_phy = dev_get_priv(dev);
+ int ret;
+
+ if (mode == pcie_phy->mode)
+ return 0;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_DEVICE:
+ case PHY_MODE_USB_OTG:
+ ret = phy_pcie_mode_set(pcie_phy, 1);
+ if (ret)
+ return ret;
+ break;
+ case PHY_MODE_PCIE:
+ phy_pcie_mode_set(pcie_phy, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(phy->dev, "Changing PHY mode to %d\n", mode);
+ pcie_phy->mode = mode;
+
+ return 0;
+}
+
+static const struct phy_ops jh7110_pcie_phy_ops = {
+ .set_mode = jh7110_pcie_phy_set_mode,
+};
+
+static int phy_stg_regfield_init(struct udevice *dev, int mode, int usb3)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ struct reg_field phy_mode = REG_FIELD(mode, 20, 21);
+ struct reg_field bus_width = REG_FIELD(usb3, 2, 3);
+ struct reg_field usb3_phy_en = REG_FIELD(usb3, 4, 4);
+
+ phy->phy_mode = devm_regmap_field_alloc(dev, phy->stg_syscon, phy_mode);
+ if (IS_ERR(phy->phy_mode)) {
+ dev_err(dev, "PHY mode reg field init failed\n");
+ return PTR_ERR(phy->phy_mode);
+ }
+
+ phy->bus_width = devm_regmap_field_alloc(dev, phy->stg_syscon, bus_width);
+ if (IS_ERR(phy->bus_width)) {
+ dev_err(dev, "PHY bus width reg field init failed\n");
+ return PTR_ERR(phy->bus_width);
+ }
+
+ phy->usb3_phy_en = devm_regmap_field_alloc(dev, phy->stg_syscon, usb3_phy_en);
+ if (IS_ERR(phy->usb3_phy_en)) {
+ dev_err(dev, "USB3 PHY enable field init failed\n");
+ return PTR_ERR(phy->bus_width);
+ }
+
+ return 0;
+}
+
+static int phy_sys_regfield_init(struct udevice *dev, int split)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ struct reg_field usb_split = REG_FIELD(split, USB_PDRSTN_SPLIT_BIT, USB_PDRSTN_SPLIT_BIT);
+
+ phy->usb_split = devm_regmap_field_alloc(dev, phy->sys_syscon, usb_split);
+ if (IS_ERR(phy->usb_split)) {
+ dev_err(dev, "USB split field init failed\n");
+ return PTR_ERR(phy->usb_split);
+ }
+
+ return 0;
+}
+
+static int starfive_pcie_phy_get_syscon(struct udevice *dev)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ struct ofnode_phandle_args sys_phandle, stg_phandle;
+ int ret;
+
+ /* get corresponding syscon phandle */
+ ret = dev_read_phandle_with_args(dev, "starfive,sys-syscon", NULL, 0, 0,
+ &sys_phandle);
+
+ if (ret < 0) {
+ dev_err(dev, "Can't get sys cfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 2, 0,
+ &stg_phandle);
+
+ if (ret < 0) {
+ dev_err(dev, "Can't get stg cfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ phy->sys_syscon = syscon_node_to_regmap(sys_phandle.node);
+ /* get syscon register offset */
+ if (!IS_ERR(phy->sys_syscon)) {
+ ret = phy_sys_regfield_init(dev, SYSCON_USB_PDRSTN_REG_OFFSET);
+ if (ret)
+ return ret;
+ } else {
+ phy->sys_syscon = NULL;
+ }
+
+ phy->stg_syscon = syscon_node_to_regmap(stg_phandle.node);
+ if (!IS_ERR(phy->stg_syscon))
+ return phy_stg_regfield_init(dev, stg_phandle.args[0],
+ stg_phandle.args[1]);
+ else
+ phy->stg_syscon = NULL;
+
+ return 0;
+}
+
+int jh7110_pcie_phy_probe(struct udevice *dev)
+{
+ struct jh7110_pcie_phy *phy = dev_get_priv(dev);
+ int rc;
+
+ phy->regs = dev_read_addr_ptr(dev);
+ if (!phy->regs)
+ return -EINVAL;
+
+ rc = starfive_pcie_phy_get_syscon(dev);
+ if (rc)
+ return rc;
+
+ phy_kvco_gain_set(phy);
+
+ return 0;
+}
+
+static const struct udevice_id jh7110_pcie_phy[] = {
+ { .compatible = "starfive,jh7110-pcie-phy"},
+ {},
+};
+
+U_BOOT_DRIVER(jh7110_pcie_phy) = {
+ .name = "jh7110_pcie_phy",
+ .id = UCLASS_PHY,
+ .of_match = jh7110_pcie_phy,
+ .probe = jh7110_pcie_phy_probe,
+ .ops = &jh7110_pcie_phy_ops,
+ .priv_auto = sizeof(struct jh7110_pcie_phy),
+};
--
2.17.1
More information about the U-Boot
mailing list