[PATCH v4 4/4] qcom_defconfig: enable capsule update support

[Caleb Connolly]

Enable all the necessary options for capsule updates to work, as well as
a few additional EFI features.

Capsule updates themselves are only enabled for the RB3 Gen 2, since the
exact details on where to flash U-Boot (or how to handle multiple boot
methods) has not been finalised for other boards.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 configs/qcm6490_defconfig | 6 ++++++
 configs/qcom_defconfig    | 8 +++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig
index 5ddc5ab3ef8c..ba26924da161 100644
--- a/configs/qcm6490_defconfig
+++ b/configs/qcm6490_defconfig
@@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600
 CONFIG_TEXT_BASE=0x9fc00000
 CONFIG_REMAKE_ELF=y
 
 CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2"
+
+# Enable capsule updates
+CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
+CONFIG_EFI_CAPSULE_ON_DISK=y
+CONFIG_EFI_IGNORE_OSINDICATIONS=y
+CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index e7ed03ff0f24..4c8ff0e84372 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9
 CONFIG_LOG_DEFAULT_LEVEL=4
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_BUS=2
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
 # CONFIG_CMD_BIND is not set
 CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CAT=y
 CONFIG_CMD_BMP=y
+CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_LOG=y
 CONFIG_OF_LIVE=y
 CONFIG_USE_DEFAULT_ENV_FILE=y
@@ -44,15 +47,18 @@ CONFIG_CLK=y
 CONFIG_CLK_QCOM_APQ8016=y
 CONFIG_CLK_QCOM_APQ8096=y
 CONFIG_CLK_QCOM_QCM2290=y
 CONFIG_CLK_QCOM_QCS404=y
-CONFIG_CLK_QCOM_SC7280=y
 CONFIG_CLK_QCOM_SDM845=y
 CONFIG_CLK_QCOM_SM6115=y
 CONFIG_CLK_QCOM_SM8150=y
 CONFIG_CLK_QCOM_SM8250=y
 CONFIG_CLK_QCOM_SM8550=y
 CONFIG_CLK_QCOM_SM8650=y
+CONFIG_CLK_QCOM_SC7280=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_SCSI=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000
 CONFIG_MSM_GPIO=y
 CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_QUP=y

-- 
2.46.2