[PATCH v2 03/18] arm64: dts: rockchip: enable uart0 on Qnap-TS433

Heiko Stuebner heiko at sntech.de
Sun Oct 13 21:24:09 CEST 2024


Uart0 is connected to an MCU on the board that handles system control
like the fan-speed. So far no driver for it is available though.

Tested-by: Uwe Kleine-König <ukleinek at debian.org>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-4-heiko@sntech.de

[ upstream commit: 07ef8be476bebd77cba3ca4804be03cc0dba414f ]

(cherry picked from commit aaa5b1c4bd8f0e4327078d513f0eef05cb829bcf)
---
 dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index 9bf9c3b65ca..bc26f2e98c1 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -104,6 +104,14 @@
 	status = "okay";
 };
 
+/*
+ * Connected to an MCU, that provides access to more LEDs,
+ * buzzer, fan control and more.
+ */
+&uart0 {
+	status = "okay";
+};
+
 /*
  * Pins available on CN3 connector at TTL voltage level (3V3).
  * ,_  _.
-- 
2.45.2



More information about the U-Boot mailing list