[PATCH v2 10/18] arm64: dts: rockchip: add gpio-keys to Qnap-TS433

Heiko Stuebner heiko at sntech.de
Sun Oct 13 21:24:16 CEST 2024


The TS433 has 3 buttons, power and copy in the front as well as a reset
pinhole button on the back. The power-button is connected to the embedded
controller while the other two buttons are just gpio connected.

Add the gpio-keys definition for the two buttons we can handle right now.

Tested-by: Uwe Kleine-König <ukleinek at debian.org>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-11-heiko@sntech.de

[ upstream commit: 9b682d31b24f1f70b5b4d0618095d46e0722b9d8 ]

(cherry picked from commit f0b858c751382ee9faf18f9b19b0817c6b50ac1c)
---
 .../src/arm64/rockchip/rk3568-qnap-ts433.dts  | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index 34fc31ea9a3..9f964b6f411 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "rk3568.dtsi"
@@ -24,6 +25,24 @@
 		stdout-path = "serial2:115200n8";
 	};
 
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&copy_button_pin>, <&reset_button_pin>;
+		pinctrl-names = "default";
+
+		key-copy {
+			label = "copy";
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_COPY>;
+		};
+
+		key-reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -202,6 +221,16 @@
 };
 
 &pinctrl {
+	keys {
+		copy_button_pin: copy-button-pin {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	leds {
 		hdd1_led_pin: hdd1-led-pin {
 			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
-- 
2.45.2



More information about the U-Boot mailing list