[PATCH v4 4/4] qcom_defconfig: enable capsule update support

[Ilias Apalodimas]

On Sat, 12 Oct 2024 at 16:57, Caleb Connolly <caleb.connolly at linaro.org> wrote:
>
> Enable all the necessary options for capsule updates to work, as well as
> a few additional EFI features.
>
> Capsule updates themselves are only enabled for the RB3 Gen 2, since the
> exact details on where to flash U-Boot (or how to handle multiple boot
> methods) has not been finalised for other boards.
>
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
>  configs/qcm6490_defconfig | 6 ++++++
>  configs/qcom_defconfig    | 8 +++++++-
>  2 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig
> index 5ddc5ab3ef8c..ba26924da161 100644
> --- a/configs/qcm6490_defconfig
> +++ b/configs/qcm6490_defconfig
> @@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600
>  CONFIG_TEXT_BASE=0x9fc00000
>  CONFIG_REMAKE_ELF=y
>
>  CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2"
> +
> +# Enable capsule updates
> +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
> +CONFIG_EFI_CAPSULE_ON_DISK=y
> +CONFIG_EFI_IGNORE_OSINDICATIONS=y
> +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
> index e7ed03ff0f24..4c8ff0e84372 100644
> --- a/configs/qcom_defconfig
> +++ b/configs/qcom_defconfig
> @@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9
>  CONFIG_LOG_DEFAULT_LEVEL=4
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_CMD_BOOTMENU=y
> +CONFIG_CMD_NVEDIT_EFI=y
>  CONFIG_CMD_EEPROM=y
>  CONFIG_SYS_I2C_EEPROM_BUS=2
>  CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
>  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
>  # CONFIG_CMD_BIND is not set
>  CONFIG_CMD_CLK=y
> +CONFIG_CMD_DFU=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_UFS=y
>  CONFIG_CMD_USB=y
>  CONFIG_CMD_CAT=y
>  CONFIG_CMD_BMP=y
> +CONFIG_CMD_EFIDEBUG=y
>  CONFIG_CMD_REGULATOR=y
>  CONFIG_CMD_LOG=y
>  CONFIG_OF_LIVE=y
>  CONFIG_USE_DEFAULT_ENV_FILE=y
> @@ -44,15 +47,18 @@ CONFIG_CLK=y
>  CONFIG_CLK_QCOM_APQ8016=y
>  CONFIG_CLK_QCOM_APQ8096=y
>  CONFIG_CLK_QCOM_QCM2290=y
>  CONFIG_CLK_QCOM_QCS404=y
> -CONFIG_CLK_QCOM_SC7280=y
>  CONFIG_CLK_QCOM_SDM845=y
>  CONFIG_CLK_QCOM_SM6115=y
>  CONFIG_CLK_QCOM_SM8150=y
>  CONFIG_CLK_QCOM_SM8250=y
>  CONFIG_CLK_QCOM_SM8550=y
>  CONFIG_CLK_QCOM_SM8650=y
> +CONFIG_CLK_QCOM_SC7280=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_SCSI=y
> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000
>  CONFIG_MSM_GPIO=y
>  CONFIG_QCOM_PMIC_GPIO=y
>  CONFIG_DM_I2C=y
>  CONFIG_SYS_I2C_QUP=y
>
> --
> 2.46.2
>

Reviewed-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>