[PATCH 1/1] Fixed sama5d3 dts file so PIO sections are inside pinctrl as in kernel dts

Alexey Tsirlin alexey at all4bambi.com
Tue Oct 15 16:53:07 CEST 2024


This allows setting the GPIO parameters from device tree, otherwise the
at91_pin_check_config will fail because the priv->nbanks equal to zero

Signed-off-by: Alexey Tsirlin <alexey at all4bambi.com>
---

 arch/arm/dts/sama5d3.dtsi | 111 +++++++++++++++++++-------------------
 1 file changed, 56 insertions(+), 55 deletions(-)

diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
index 4c03a302ec..c671ea42f2 100644
--- a/arch/arm/dts/sama5d3.dtsi
+++ b/arch/arm/dts/sama5d3.dtsi
@@ -873,66 +873,67 @@
 							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
 					};
 				};
-			};
 
-			pioA: gpio at fffff200 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&pioA_clk>;
-				bootph-all;
-			};
+				pioA: gpio at fffff200 {
+				      compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x100>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+					bootph-all;
+				};
 
-			pioB: gpio at fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&pioB_clk>;
-				bootph-all;
-			};
+				pioB: gpio at fffff400 {
+				      compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x100>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+					bootph-all;
+				};
 
-			pioC: gpio at fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&pioC_clk>;
-				bootph-all;
-			};
+				pioC: gpio at fffff600 {
+				      compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x100>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+					bootph-all;
+				};
 
-			pioD: gpio at fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&pioD_clk>;
-				bootph-all;
-			};
+				pioD: gpio at fffff800 {
+				      compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x100>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
+					bootph-all;
+				};
+
+				pioE: gpio at fffffa00 {
+				      compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x100>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioE_clk>;
+					bootph-all;
+				};
 
-			pioE: gpio at fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&pioE_clk>;
-				bootph-all;
 			};
 
 			pmc: pmc at fffffc00 {
-- 
2.34.1



More information about the U-Boot mailing list