[PATCH] Revert "Makefile: Drop SPL_FIT_GENERATOR / SPL_FIT_SOURCE support" changes

[Tom Rini]

:hile we had hoped to be able to remove these options finally, it was
missed that zynq still requires these currently.

This reverts commit 5b9261fb0b1ed087387f2036d279fd3f4bb20a61 and
commit 099b6df556c95f5d06864612e9199eab7ba50ed3.

Reported-by: Jonas Karlman <jonas at kwiboo.se>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 Makefile                | 24 ++++++++++++++++++++++++
 boot/Kconfig            | 23 +++++++++++++++++++++++
 doc/usage/fit/howto.rst |  9 +++++++++
 3 files changed, 56 insertions(+)

diff --git a/Makefile b/Makefile
index 0005e999a657..3267fb1c469a 100644
--- a/Makefile
+++ b/Makefile
@@ -1145,6 +1145,13 @@ ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
 	@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
 	@echo >&2 "See doc/develop/devicetree/control.rst for more info."
 	@echo >&2 "===================================================="
+endif
+ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
+	@echo >&2 "to binman instead, to avoid the proliferation of"
+	@echo >&2 "arch-specific scripts with no tests."
+	@echo >&2 "===================================================="
 endif
 	$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
 		$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
@@ -1412,6 +1419,23 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 	$(call if_changed,objcopy)
 
+# Boards with more complex image requirements can provide an .its source file
+# or a generator script
+# NOTE: Please do not use this. We are migrating away from Makefile rules to use
+# binman instead.
+ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
+	$(call if_changed,copy)
+else
+ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
+	$(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
+	$(patsubst %,$(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
+endif
+endif
+
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
diff --git a/boot/Kconfig b/boot/Kconfig
index 4314227d5f86..925afe06a19f 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -282,6 +282,29 @@ config SPL_FIT_IMAGE_POST_PROCESS
 	  injected into the FIT creation (i.e. the blobs would have been pre-
 	  processed before being added to the FIT image).
 
+config SPL_FIT_SOURCE
+	string ".its source file for U-Boot FIT image"
+	depends on SPL_FIT
+	help
+	  Specifies a (platform specific) FIT source file to generate the
+	  U-Boot FIT image. This could specify further image to load and/or
+	  execute.
+
+config USE_SPL_FIT_GENERATOR
+	bool "Use a script to generate the .its script"
+	depends on SPL_FIT
+	default y if SPL_FIT && ARCH_ZYNQMP
+
+config SPL_FIT_GENERATOR
+	string ".its file generator script for U-Boot FIT image"
+	depends on USE_SPL_FIT_GENERATOR
+	default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
+	help
+	  Specifies a (platform specific) script file to generate the FIT
+	  source file used to build the U-Boot FIT image file. This gets
+	  passed a list of supported device tree file stub names to
+	  include in the generated image.
+
 if VPL
 
 config VPL_FIT
diff --git a/doc/usage/fit/howto.rst b/doc/usage/fit/howto.rst
index 675c9aa5bb0f..b5097d4460bf 100644
--- a/doc/usage/fit/howto.rst
+++ b/doc/usage/fit/howto.rst
@@ -57,6 +57,15 @@ own subnode under the /images node, which should then be referenced from one or
 multiple /configurations subnodes. The required images must be enumerated in
 the "loadables" property as a list of strings.
 
+If a platform specific image source file (.its) is shipped with the U-Boot
+source, it can be specified using the CONFIG_SPL_FIT_SOURCE Kconfig symbol.
+In this case it will be automatically used by U-Boot's Makefile to generate
+the image.
+If a static source file is not flexible enough, CONFIG_SPL_FIT_GENERATOR
+can point to a script which generates this image source file during
+the build process. It gets passed a list of device tree files (taken from the
+CONFIG_OF_LIST symbol).
+
 The SPL also records to a DT all additional images (called loadables) which are
 loaded. The information about loadables locations is passed via the DT node with
 fit-images name.
-- 
2.43.0