[PATCH] usb: dwc3-generic: use DR_MODE_OTG when dr_mode isn't specified

[Neil Armstrong]

The USB DRD bindingsa at [1] are clear, if not specified the dr_mode
property defaults to otg, and this is how Linux behaves.

A cleanup is ongoing on the Linux Device Trees to remove dr_mode when
set to "otg", so take this in account and do not fail anymore when
dr_mode isn't specified in the glue or dwc3 node.

[1] https://www.kernel.org/doc/Documentation/devicetree/bindings/usb/usb-drd.yaml

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 drivers/usb/dwc3/dwc3-generic.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 2ab41cbae45..d62d687ece3 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -183,10 +183,10 @@ static int dwc3_generic_of_to_plat(struct udevice *dev)
 		/* might be a leaf so check the parent for mode */
 		node = dev_ofnode(dev->parent);
 		plat->dr_mode = usb_get_dr_mode(node);
-		if (plat->dr_mode == USB_DR_MODE_UNKNOWN) {
-			pr_err("Invalid usb mode setup\n");
-			return -ENODEV;
-		}
+
+		/* If none of the nodes have dr_mode, bindings says default is OTG */
+		if (!plat->dr_mode)
+			plat->dr_mode = USB_DR_MODE_OTG;
 	}
 
 	return 0;
@@ -527,6 +527,10 @@ static int dwc3_glue_bind_common(struct udevice *parent, ofnode node)
 	if (!dr_mode)
 		dr_mode = usb_get_dr_mode(node);
 
+	/* If none of the nodes have dr_mode, bindings says default is OTG */
+	if (!dr_mode)
+		dr_mode = USB_DR_MODE_OTG;
+
 	if (CONFIG_IS_ENABLED(DM_USB_GADGET) &&
 	    (dr_mode == USB_DR_MODE_PERIPHERAL || dr_mode == USB_DR_MODE_OTG)) {
 		debug("%s: dr_mode: OTG or Peripheral\n", __func__);

---
base-commit: d5cab0d6adc26ec1bbd45c2fed101184d04454ae
change-id: 20241016-topic-usb-dwc3-dr-mode-otg-88ec307e0970

Best regards,
-- 
Neil Armstrong <neil.armstrong at linaro.org>