[PATCH v2 2/2] board: rockchip: Add support for rk3588 GenBook
Andy Yan
andyshrk at 163.com
Sat Oct 19 12:47:29 CEST 2024
Add support for Cool Pi GenBook, it works as a carrier board
connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Signed-off-by: Andy Yan <andyshrk at 163.com>
---
Changes in v2:
- split the dts to a separate commit
- rename to genbook_cm5_rk3588
- move readme to doc/board, and write as reStructuredText format
- alphabetically reorder
- update doc/board/rockchip
.../dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi | 70 ++++++++++++
arch/arm/mach-rockchip/rk3588/Kconfig | 19 ++++
board/coolpi/genbook_cm5_rk3588/Kconfig | 12 ++
board/coolpi/genbook_cm5_rk3588/MAINTAINERS | 7 ++
configs/coolpi-genbook-cm5-rk3588_defconfig | 104 ++++++++++++++++++
doc/board/coolpi/genbook_cm5_rk3588.rst | 69 ++++++++++++
doc/board/coolpi/index.rst | 9 ++
doc/board/rockchip/rockchip.rst | 1 +
include/configs/genbook-cm5-rk3588.h | 28 +++++
9 files changed, 319 insertions(+)
create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
create mode 100644 board/coolpi/genbook_cm5_rk3588/Kconfig
create mode 100644 board/coolpi/genbook_cm5_rk3588/MAINTAINERS
create mode 100644 configs/coolpi-genbook-cm5-rk3588_defconfig
create mode 100644 doc/board/coolpi/genbook_cm5_rk3588.rst
create mode 100644 doc/board/coolpi/index.rst
create mode 100644 include/configs/genbook-cm5-rk3588.h
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi b/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
new file mode 100644
index 00000000000..5835bd4352b
--- /dev/null
+++ b/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588-u-boot.dtsi"
+
+&fspim2_pins {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sdhci {
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+};
+
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ bootph-pre-ram;
+ bootph-some-ram;
+ spi-max-frequency = <24000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ status = "okay";
+};
+
+/* For Keypad */
+&usb_host0_ehci {
+ status = "disabled";
+};
+
+&usb_host0_ohci {
+ status = "disabled";
+};
+
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ status = "okay";
+};
+
+/* connected to a HUB for camera and BT */
+&usb_host1_ehci {
+ status = "disabled";
+};
+
+&usb_host1_ohci {
+ status = "disabled";
+};
+
+/* USB A out */
+&usb_host1_xhci {
+ snps,dis_u3_susphy_quirk;
+};
diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig
index a76a470cc98..c53f6bb926e 100644
--- a/arch/arm/mach-rockchip/rk3588/Kconfig
+++ b/arch/arm/mach-rockchip/rk3588/Kconfig
@@ -29,6 +29,24 @@ config TARGET_CM3588_NAS_RK3588
- 3.5mm Headphone out, 2.0mm PH-2A Mic in
- 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
+config TARGET_GENBOOK_CM5_RK3588
+ bool "Cool Pi CM5 GenBook"
+ select BOARD_LATE_INIT
+ help
+ GeenBook is a notebook based on Rockchip RK3588, and works as a carrier
+ board connect with CM5 SOM.
+
+ Specification:
+ - Rockchip RK3588
+ - LPDDR5X 8/32 GB
+ - eMMC 64 GB
+ - HDMI Type A out x 1
+ - USB 3.0 Host x 1
+ - USB-C 3.0 with DisplayPort AltMode
+ - PCIE M.2 E Key for RTL8852BE Wireless connection
+ - PCIE M.2 M Key for NVME connection
+ - eDP panel with 1920x1080
+
config TARGET_JAGUAR_RK3588
bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)"
select BOARD_LATE_INIT
@@ -361,6 +379,7 @@ config TEXT_BASE
default 0x00a00000
source "board/armsom/sige7-rk3588/Kconfig"
+source "board/coolpi/genbook_cm5_rk3588/Kconfig"
source "board/edgeble/neural-compute-module-6/Kconfig"
source "board/friendlyelec/cm3588-nas-rk3588/Kconfig"
source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
diff --git a/board/coolpi/genbook_cm5_rk3588/Kconfig b/board/coolpi/genbook_cm5_rk3588/Kconfig
new file mode 100644
index 00000000000..67086ea6297
--- /dev/null
+++ b/board/coolpi/genbook_cm5_rk3588/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_GENBOOK_CM5_RK3588
+
+config SYS_BOARD
+ default "genbook_cm5_rk3588"
+
+config SYS_VENDOR
+ default "coolpi"
+
+config SYS_CONFIG_NAME
+ default "genbook-cm5-rk3588"
+
+endif
diff --git a/board/coolpi/genbook_cm5_rk3588/MAINTAINERS b/board/coolpi/genbook_cm5_rk3588/MAINTAINERS
new file mode 100644
index 00000000000..b7094d49e4a
--- /dev/null
+++ b/board/coolpi/genbook_cm5_rk3588/MAINTAINERS
@@ -0,0 +1,7 @@
+GENBOOK-CM5-RK3588
+M: andyshrk <andyshrk at 163.com>
+S: Maintained
+F: board/coolpi/genbook-cm5-rk3588
+F: include/configs/genbook-cm5-rk3588.h
+F: configs/coolpi-genbook-cm5-rk3588_defconfig
+F: arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
diff --git a/configs/coolpi-genbook-cm5-rk3588_defconfig b/configs/coolpi-genbook-cm5-rk3588_defconfig
new file mode 100644
index 00000000000..ebe2cdf9f9e
--- /dev/null
+++ b/configs/coolpi-genbook-cm5-rk3588_defconfig
@@ -0,0 +1,104 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-coolpi-cm5-genbook"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_GENBOOK_CM5_RK3588=y
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-coolpi-cm5-genbook.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+# CONFIG_CMD_BIND is not set
+# CONFIG_CMD_FASTBOOT is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_AHCI_PCI=y
+CONFIG_DWC_AHCI=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=5
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_PHY_MOTORCOMM=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_ERRNO_STR=y
diff --git a/doc/board/coolpi/genbook_cm5_rk3588.rst b/doc/board/coolpi/genbook_cm5_rk3588.rst
new file mode 100644
index 00000000000..18de101ff68
--- /dev/null
+++ b/doc/board/coolpi/genbook_cm5_rk3588.rst
@@ -0,0 +1,69 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+GenBook
+=====================
+Cool Pi GenBook is a laptop powered by RK3588, it works with a
+carrier board connect with CM5.
+
+Specification:
+* Rockchip RK3588
+* LPDDR5X 8/32 GB
+* eMMC 64 GB
+* SPI Nor 8 MB
+* HDMI Type A out x 1
+* USB 3.0 Host x 1
+* USB-C 3.0 with DisplayPort AltMode
+* PCIE M.2 E Key for RTL8852BE Wireless connection
+* PCIE M.2 M Key for NVME connection
+* eDP panel with 1920x1080
+
+Here is the step-by-step to compile and boot to U-Boot on GenBook.
+
+Get the TF-A and DDR init (TPL) binaries
+----------------------------------------
+
+.. prompt:: bash
+
+ > cd u-boot
+ > export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin
+ > export BL31=../rkbin/bin/rk35/rk3588_bl31_v1.46.elf
+ > make coolpi-genbook-cm5-rk3588_defconfig
+ > make CROSS_COMPILE=aarch64-linux-gnu-
+
+This will build ``u-boot-rockchip.bin`` for eMMC and ``u-boot-rockchip-spi.bin`` for SPI Nor.
+
+Write u-boot to eMMC or SPI Nor from a Linux system on the laptop
+---------------
+
+Copy ``u-boot-rockchip.bin`` and ``u-boot-rockchip-spi.bin`` to the laptop.
+
+eMMC
+~~~~~~~
+
+.. prompt:: bash
+
+ dd if=u-boot-rockchip.bin of=/dev/mmcblk0 bs=512 seek=64
+
+SPI Nor
+~~~~
+
+.. prompt:: bash
+
+ dd if=u-boot-rockchip-spi.bin of=/dev/mtdblock0
+
+``upgrade_tool`` allows to flash the on-board SPI Nor via the USB TypeC interface
+with help of the Rockchip loader binary.
+
+To enter the USB flashing mode, connect the laptop and your HOST PC with a USB-C
+cable, reset the laptop with ``Loader Key`` pressed.
+On your PC, check with ``lsusb -d 2207:350b``).
+
+To flash U-Boot on the SPI Nor with ``upgrade_tool``:
+
+.. prompt:: bash
+
+ upgrade_tool db rk3588/MiniLoaderAll.bin
+ upgrade_tool ssd // Input 5 for SPINOR download mode
+ upgrade_tool wl 0 u-boot-rockchip-spi.bin
+ upgrade_tool rd
+
diff --git a/doc/board/coolpi/index.rst b/doc/board/coolpi/index.rst
new file mode 100644
index 00000000000..9c9593fd6aa
--- /dev/null
+++ b/doc/board/coolpi/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Cool Pi
+=================
+
+.. toctree::
+ :maxdepth: 2
+
+ genbook_cm5_rk3588
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index 86d83befb5b..8734b29faff 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -124,6 +124,7 @@ List of mainline supported Rockchip boards:
* rk3588
- ArmSoM Sige7 (sige7-rk3588)
+ - Cool Pi CM5 GenBook (coolpi-genbook-cm5-rk3588)
- Rockchip EVB (evb-rk3588)
- Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588)
- Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)
diff --git a/include/configs/genbook-cm5-rk3588.h b/include/configs/genbook-cm5-rk3588.h
new file mode 100644
index 00000000000..58ea45e860e
--- /dev/null
+++ b/include/configs/genbook-cm5-rk3588.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ */
+
+#ifndef __GENBOOK_CM5_RK3588_H
+#define __GENBOOK_CM5_RK3588_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#undef CFG_EXTRA_ENV_SETTINGS
+
+/*
+ * As a laptop, there is no sdmmc, and we want to
+ * set usb the highest boot priority for third-part
+ * os installation.
+ */
+#define CFG_EXTRA_ENV_SETTINGS \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "partitions=" PARTS_DEFAULT \
+ ENV_MEM_LAYOUT_SETTINGS \
+ ROCKCHIP_DEVICE_SETTINGS \
+ "boot_targets=" "usb mmc0" "\0"
+
+#endif /* __GENBOOK_CM5_RK3588_H */
--
2.34.1
More information about the U-Boot
mailing list