[PATCH v4 0/8] Inline ECC Series

Santhosh Kumar K s-k6 at ti.com
Mon Oct 21 06:40:16 CEST 2024


Hello,

This series is to:

Add support for Inline ECC in DDR for AM64X, AM62X, AM62AX, AM62PX,
J721S2 and J784S4 devices.

(1/8) Enable ECC priming with BIST engine
(2/8) Add a function to store base address and size of RAM's banks
      in a 64-bit device private data
(3/8) Setup the ECC region start and range
(4/8) Enable ECC 1-bit error, 2-bit error and multiple-bit
      error interrupts
(5/8) Add CONFIG_K3_INLINE_ECC
(6/8) Set NR_DRAM_BANKS to 2
(7/8) Pull Redundant DDR functions to a common location and Fixup
      DDR size when ECC is enabled
(8/8) Add ss_cfg reg entry

Changes since v3:
Pull redundant DDR functions to arch/arm/mach-k3/*

v3: https://lore.kernel.org/all/20240523050430.455201-1-s-k6@ti.com/

Changes since v2:
Removed 'default n' in Kconfig as that is default setting

v2: https://lore.kernel.org/u-boot/20240510084707.1903133-1-s-k6@ti.com/

Changes since v1:
Add support for J7* devices.

v1: https://lore.kernel.org/u-boot/20240131060213.1128024-1-s-k6@ti.com/

Test Results: https://gist.github.com/santhosh21/25937355aa2c134a64fa76480ac6a4a2

Thanks and Regards,
Santhosh.

Georgi Vlaev (1):
  ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming

Neha Malcom Francis (2):
  drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC
  configs: j7*_evm_r5_defconfig: Set NR_DRAM_BANKS to 2

Santhosh Kumar K (5):
  ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve
    'calculations restricted to 32 bits' issue
  ram: k3-ddrss: Setup ECC region start and range
  ram: k3-ddrss: Enable ECC interrupts
  board: ti: Pull redundant DDR functions to a common location and Fixup
    DDR size when ECC is enabled
  arm: dts: k3-*-ddr: Add ss_cfg reg entry

 arch/arm/dts/k3-am62a-ddr.dtsi         |   7 +-
 arch/arm/dts/k3-j721s2-ddr.dtsi        |  12 +-
 arch/arm/dts/k3-j784s4-ddr.dtsi        |  24 ++-
 arch/arm/mach-k3/Makefile              |   2 +-
 arch/arm/mach-k3/include/mach/k3-ddr.h |  15 ++
 arch/arm/mach-k3/k3-ddr.c              |  88 ++++++++++
 board/ti/am62ax/evm.c                  |  17 +-
 board/ti/am62px/evm.c                  |  17 +-
 board/ti/am62x/evm.c                   |  62 +------
 board/ti/am64x/evm.c                   |  73 +--------
 board/ti/am65x/evm.c                   |  29 +---
 board/ti/j721e/evm.c                   |  29 +---
 board/ti/j721s2/evm.c                  |  35 ++--
 board/ti/j784s4/evm.c                  |  17 +-
 configs/j7200_evm_r5_defconfig         |   1 +
 configs/j721e_evm_r5_defconfig         |   1 +
 configs/j721s2_evm_r5_defconfig        |   1 +
 configs/j784s4_evm_r5_defconfig        |   1 +
 drivers/ram/Kconfig                    |  10 ++
 drivers/ram/k3-ddrss/k3-ddrss.c        | 214 +++++++++++++++++++++----
 20 files changed, 387 insertions(+), 268 deletions(-)
 create mode 100644 arch/arm/mach-k3/include/mach/k3-ddr.h
 create mode 100644 arch/arm/mach-k3/k3-ddr.c

-- 
2.34.1



More information about the U-Boot mailing list