[PATCH v2 11/25] led: Drop LED_STATUS from Kconfig
Simon Glass
sjg at chromium.org
Mon Oct 21 13:38:19 CEST 2024
Drop all of these configs, which are now unused.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
drivers/led/Kconfig | 316 --------------------------------------------
1 file changed, 316 deletions(-)
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
index 789113a92b5..379b3ce49a5 100644
--- a/drivers/led/Kconfig
+++ b/drivers/led/Kconfig
@@ -138,320 +138,4 @@ config SPL_LED_GPIO
endif # LED
-config LED_STATUS
- bool "Enable status LED API"
- help
- Allows common u-boot commands to use a board's leds to
- provide status for activities like booting and downloading files.
-
-if LED_STATUS
-
-# Hidden constants
-
-config LED_STATUS_OFF
- int
- default 0
-
-config LED_STATUS_BLINKING
- int
- default 1
-
-config LED_STATUS_ON
- int
- default 2
-
-# Hidden constants end
-
-config LED_STATUS_GPIO
- bool "GPIO status LED implementation"
- help
- The status LED can be connected to a GPIO pin. In such cases, the
- gpio_led driver can be used as a status LED backend implementation.
-
-comment "LEDs parameters"
-
-config LED_STATUS0
- bool "Enable status LED 0"
-
-if LED_STATUS0
-
-config LED_STATUS_BIT
- int "identification"
- help
- CONFIG_LED_STATUS_BIT is passed into the __led_* functions to identify
- which LED is being acted on. As such, the chosen value must be unique
- with respect to the other CONFIG_LED_STATUS_BIT's. Mapping the value
- to a physical LED is the responsibility of the __led_* function.
-
-config LED_STATUS_STATE
- int "initial state"
- range LED_STATUS_OFF LED_STATUS_ON
- default LED_STATUS_OFF
- help
- Should be set one of the following:
- 0 - off
- 1 - blinking
- 2 - on
-
-config LED_STATUS_FREQ
- int "blink frequency"
- range 2 10
- default 2
- help
- The LED blink period calculated from LED_STATUS_FREQ:
- LED_STATUS_PERIOD = CONFIG_SYS_HZ/LED_STATUS_FREQ
- Values range: 2 - 10
-
-endif # LED_STATUS0
-
-config LED_STATUS1
- bool "Enable status LED 1"
-
-if LED_STATUS1
-
-config LED_STATUS_BIT1
- int "identification"
- help
- CONFIG_LED_STATUS_BIT1 is passed into the __led_* functions to
- identify which LED is being acted on. As such, the chosen value must
- be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
- the value to a physical LED is the responsibility of the __led_*
- function.
-
-config LED_STATUS_STATE1
- int "initial state"
- range LED_STATUS_OFF LED_STATUS_ON
- default LED_STATUS_OFF
- help
- Should be set one of the following:
- 0 - off
- 1 - blinking
- 2 - on
-
-config LED_STATUS_FREQ1
- int "blink frequency"
- range 2 10
- default 2
- help
- The LED blink period calculated from LED_STATUS_FREQ1:
- LED_STATUS_PERIOD1 = CONFIG_SYS_HZ/LED_STATUS_FREQ1
- Values range: 2 - 10
-
-endif # LED_STATUS1
-
-config LED_STATUS2
- bool "Enable status LED 2"
-
-if LED_STATUS2
-
-config LED_STATUS_BIT2
- int "identification"
- help
- CONFIG_LED_STATUS_BIT2 is passed into the __led_* functions to
- identify which LED is being acted on. As such, the chosen value must
- be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
- the value to a physical LED is the responsibility of the __led_*
- function.
-
-config LED_STATUS_STATE2
- int "initial state"
- range LED_STATUS_OFF LED_STATUS_ON
- default LED_STATUS_OFF
- help
- Should be set one of the following:
- 0 - off
- 1 - blinking
- 2 - on
-
-config LED_STATUS_FREQ2
- int "blink frequency"
- range 2 10
- default 2
- help
- The LED blink period calculated from LED_STATUS_FREQ2:
- LED_STATUS_PERIOD2 = CONFIG_SYS_HZ/LED_STATUS_FREQ2
- Values range: 2 - 10
-
-endif # LED_STATUS2
-
-config LED_STATUS3
- bool "Enable status LED 3"
-
-if LED_STATUS3
-
-config LED_STATUS_BIT3
- int "identification"
- help
- CONFIG_LED_STATUS_BIT3 is passed into the __led_* functions to
- identify which LED is being acted on. As such, the chosen value must
- be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
- the value to a physical LED is the responsibility of the __led_*
- function.
-
-config LED_STATUS_STATE3
- int "initial state"
- range LED_STATUS_OFF LED_STATUS_ON
- default LED_STATUS_OFF
- help
- Should be set one of the following:
- 0 - off
- 1 - blinking
- 2 - on
-
-config LED_STATUS_FREQ3
- int "blink frequency"
- range 2 10
- default 2
- help
- The LED blink period calculated from LED_STATUS_FREQ3:
- LED_STATUS_PERIOD3 = CONFIG_SYS_HZ/LED_STATUS_FREQ3
- Values range: 2 - 10
-
-endif # LED_STATUS3
-
-config LED_STATUS4
- bool "Enable status LED 4"
-
-if LED_STATUS4
-
-config LED_STATUS_BIT4
- int "identification"
- help
- CONFIG_LED_STATUS_BIT4 is passed into the __led_* functions to
- identify which LED is being acted on. As such, the chosen value must
- be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
- the value to a physical LED is the responsibility of the __led_*
- function.
-
-config LED_STATUS_STATE4
- int "initial state"
- range LED_STATUS_OFF LED_STATUS_ON
- default LED_STATUS_OFF
- help
- Should be set one of the following:
- 0 - off
- 1 - blinking
- 2 - on
-
-config LED_STATUS_FREQ4
- int "blink frequency"
- range 2 10
- default 2
- help
- The LED blink period calculated from LED_STATUS_FREQ4:
- LED_STATUS_PERIOD4 = CONFIG_SYS_HZ/LED_STATUS_FREQ4
- Values range: 2 - 10
-
-endif # LED_STATUS4
-
-config LED_STATUS5
- bool "Enable status LED 5"
-
-if LED_STATUS5
-
-config LED_STATUS_BIT5
- int "identification"
- help
- CONFIG_LED_STATUS_BIT5 is passed into the __led_* functions to
- identify which LED is being acted on. As such, the chosen value must
- be unique with respect to the other CONFIG_LED_STATUS_BIT's. Mapping
- the value to a physical LED is the responsibility of the __led_*
- function.
-
-config LED_STATUS_STATE5
- int "initial state"
- range LED_STATUS_OFF LED_STATUS_ON
- default LED_STATUS_OFF
- help
- Should be set one of the following:
- 0 - off
- 1 - blinking
- 2 - on
-
-config LED_STATUS_FREQ5
- int "blink frequency"
- range 2 10
- default 2
- help
- The LED blink period calculated from LED_STATUS_FREQ5:
- LED_STATUS_PERIOD5 = CONFIG_SYS_HZ/LED_STATUS_FREQ5
- Values range: 2 - 10
-
-endif # LED_STATUS5
-
-config LED_STATUS_BOOT_ENABLE
- bool "Enable BOOT LED"
- help
- Enable to turn an LED on when the board is booting.
-
-if LED_STATUS_BOOT_ENABLE
-
-config LED_STATUS_BOOT
- int "LED to light when the board is booting"
- help
- Valid enabled LED device number.
-
-endif # LED_STATUS_BOOT_ENABLE
-
-config LED_STATUS_RED_ENABLE
- bool "Enable red LED"
- help
- Enable red status LED.
-
-if LED_STATUS_RED_ENABLE
-
-config LED_STATUS_RED
- int "Red LED identification"
- help
- Valid enabled LED device number.
-
-endif # LED_STATUS_RED_ENABLE
-
-config LED_STATUS_YELLOW_ENABLE
- bool "Enable yellow LED"
- help
- Enable yellow status LED.
-
-if LED_STATUS_YELLOW_ENABLE
-
-config LED_STATUS_YELLOW
- int "Yellow LED identification"
- help
- Valid enabled LED device number.
-
-endif # LED_STATUS_YELLOW_ENABLE
-
-config LED_STATUS_BLUE_ENABLE
- bool "Enable blue LED"
- help
- Enable blue status LED.
-
-if LED_STATUS_BLUE_ENABLE
-
-config LED_STATUS_BLUE
- int "Blue LED identification"
- help
- Valid enabled LED device number.
-
-endif # LED_STATUS_BLUE_ENABLE
-
-config LED_STATUS_GREEN_ENABLE
- bool "Enable green LED"
- help
- Enable green status LED.
-
-if LED_STATUS_GREEN_ENABLE
-
-config LED_STATUS_GREEN
- int "Green LED identification"
- help
- Valid enabled LED device number (0-5).
-
-endif # LED_STATUS_GREEN_ENABLE
-
-config LED_STATUS_CMD
- bool "Enable status LED commands"
-
-endif # LED_STATUS
-
endmenu
--
2.43.0
More information about the U-Boot
mailing list