[PATCH v2 04/11] usb: musb-new: Add support for Analog Devices SC5xx SoCs
Vasileios Bimpikas via B4 Relay
devnull+vasileios.bimpikas.analog.com at kernel.org
Mon Oct 21 15:54:35 CEST 2024
From: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
This adds support for the MUSB-based USB controller found in the
Analog Devices SC57x and SC58x SoCs.
Co-developed-by: Greg Malysa <greg.malysa at timesys.com>
Signed-off-by: Greg Malysa <greg.malysa at timesys.com>
Co-developed-by: Ian Roberts <ian.roberts at timesys.com>
Signed-off-by: Ian Roberts <ian.roberts at timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas at analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal at analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs at analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
---
MAINTAINERS | 1 +
drivers/usb/musb-new/Kconfig | 7 ++
drivers/usb/musb-new/Makefile | 1 +
drivers/usb/musb-new/sc5xx.c | 202 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 211 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 981c41cb512684736c933b78a3547657b13e016b..8706bdc1ee5a3e0e9f626f5370c534638bf6d9d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -617,6 +617,7 @@ F: drivers/gpio/gpio-adi-adsp.c
F: drivers/pinctrl/pinctrl-adi-adsp.c
F: drivers/serial/serial_adi_uart4.c
F: drivers/timer/adi_sc5xx_timer.c
+F: drivers/usb/musb-new/sc5xx.c
F: include/configs/sc5*
F: include/env/adi/
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index c52afd41a7532486c57bc2fa9d532757b45d8e83..ad9072a532767b94d4171d1236ffc99f48330206 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -22,6 +22,13 @@ config USB_MUSB_GADGET
Enables the MUSB USB dual-role controller in gadget mode.
if USB_MUSB_HOST || USB_MUSB_GADGET
+config USB_MUSB_SC5XX
+ bool "Analog Devices MUSB support"
+ depends on (SC57X || SC58X)
+ help
+ Say y here to enable support for the USB controller on
+ ADI SC57X/SC58X processors.
+
config USB_MUSB_DA8XX
bool "Enable DA8xx MUSB Controller"
depends on ARCH_DAVINCI
diff --git a/drivers/usb/musb-new/Makefile b/drivers/usb/musb-new/Makefile
index 396ff02654b97f318515ea36625444900b9471bf..6638772daca9ef02a0cf40e718c3df4dad02c06c 100644
--- a/drivers/usb/musb-new/Makefile
+++ b/drivers/usb/musb-new/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_MUSB_PIC32) += pic32.o
obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
obj-$(CONFIG_USB_MUSB_TI) += ti-musb.o
obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
+obj-$(CONFIG_USB_MUSB_SC5XX) += sc5xx.o
ccflags-y := $(call cc-option,-Wno-unused-variable) \
$(call cc-option,-Wno-unused-but-set-variable) \
diff --git a/drivers/usb/musb-new/sc5xx.c b/drivers/usb/musb-new/sc5xx.c
new file mode 100644
index 0000000000000000000000000000000000000000..16201480b43b17120109c5575993ff3176f2a70e
--- /dev/null
+++ b/drivers/usb/musb-new/sc5xx.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2022 - Analog Devices, Inc.
+ *
+ * ADI SC5XX MUSB "glue layer"
+ *
+ * Written and/or maintained by Timesys Corporation
+ *
+ * Loosely ported from Linux driver:
+ * Author: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
+ *
+ */
+
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/usb/musb.h>
+#include "linux-compat.h"
+#include "musb_core.h"
+#include "musb_uboot.h"
+
+#define MUSB_SOFTRST 0x7f
+#define MUSB_SOFTRST_NRST BIT(0)
+#define MUSB_SOFTRST_NRSTX BIT(1)
+
+#define REG_USB_VBUS_CTL 0x380
+#define REG_USB_ID_CTL 0x382
+#define REG_USB_PHY_CTL 0x394
+#define REG_USB_PLL_OSC 0x398
+#define REG_USB_UTMI_CTL 0x39c
+
+/* controller data */
+struct sc5xx_musb_data {
+ struct musb_host_data mdata;
+ struct device dev;
+};
+
+#define to_sc5xx_musb_data(d) \
+ container_of(d, struct sc5xx_musb_data, dev)
+
+static void sc5xx_musb_disable(struct musb *musb)
+{
+ /* no way to shut the controller */
+}
+
+static int sc5xx_musb_enable(struct musb *musb)
+{
+ /* soft reset by NRSTx */
+ musb_writeb(musb->mregs, MUSB_SOFTRST, MUSB_SOFTRST_NRSTX);
+ /* set mode */
+ musb_platform_set_mode(musb, musb->board_mode);
+
+ return 0;
+}
+
+static irqreturn_t sc5xx_interrupt(int irq, void *hci)
+{
+ struct musb *musb = hci;
+ irqreturn_t ret = IRQ_NONE;
+ u8 devctl;
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ if (musb->int_usb & MUSB_INTR_VBUSERROR) {
+ musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+ devctl = musb_readw(musb->mregs, MUSB_DEVCTL);
+ devctl |= MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+ }
+ if (musb->int_usb || musb->int_tx || musb->int_rx) {
+ musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
+ musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
+ musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
+ ret = musb_interrupt(musb);
+ }
+
+ if (musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))
+ musb_writeb(musb->mregs, REG_USB_VBUS_CTL, 0x0);
+
+ return ret;
+}
+
+static int sc5xx_musb_set_mode(struct musb *musb, u8 mode)
+{
+ struct device *dev = musb->controller;
+ struct sc5xx_musb_data *pdata = to_sc5xx_musb_data(dev);
+
+ switch (mode) {
+ case MUSB_HOST:
+ musb_writeb(musb->mregs, REG_USB_ID_CTL, 0x1);
+ break;
+ case MUSB_PERIPHERAL:
+ musb_writeb(musb->mregs, REG_USB_ID_CTL, 0x3);
+ break;
+ case MUSB_OTG:
+ musb_writeb(musb->mregs, REG_USB_ID_CTL, 0x0);
+ break;
+ default:
+ dev_err(dev, "unsupported mode %d\n", mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sc5xx_musb_init(struct musb *musb)
+{
+ struct sc5xx_musb_data *pdata = to_sc5xx_musb_data(musb->controller);
+
+ musb->isr = sc5xx_interrupt;
+
+ musb_writel(musb->mregs, REG_USB_PLL_OSC, 20 << 1);
+ musb_writeb(musb->mregs, REG_USB_VBUS_CTL, 0x0);
+ musb_writeb(musb->mregs, REG_USB_PHY_CTL, 0x80);
+ musb_writel(musb->mregs, REG_USB_UTMI_CTL,
+ 0x40 | musb_readl(musb->mregs, REG_USB_UTMI_CTL));
+
+ return 0;
+}
+
+const struct musb_platform_ops sc5xx_musb_ops = {
+ .init = sc5xx_musb_init,
+ .set_mode = sc5xx_musb_set_mode,
+ .disable = sc5xx_musb_disable,
+ .enable = sc5xx_musb_enable,
+};
+
+static struct musb_hdrc_config sc5xx_musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+/* has one MUSB controller which can be host or gadget */
+static struct musb_hdrc_platform_data sc5xx_musb_plat = {
+ .mode = MUSB_HOST,
+ .config = &sc5xx_musb_config,
+ .power = 100,
+ .platform_ops = &sc5xx_musb_ops,
+};
+
+static int musb_usb_probe(struct udevice *dev)
+{
+ struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+ struct sc5xx_musb_data *pdata = dev_get_priv(dev);
+ struct musb_host_data *mdata = &pdata->mdata;
+ void __iomem *mregs;
+ int ret;
+
+ priv->desc_before_addr = true;
+
+ mregs = dev_remap_addr(dev);
+ if (!mregs)
+ return -EINVAL;
+
+ /* init controller */
+ if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) {
+ mdata->host = musb_init_controller(&sc5xx_musb_plat,
+ &pdata->dev, mregs);
+ if (!mdata->host)
+ return -EIO;
+
+ ret = musb_lowlevel_init(mdata);
+ } else {
+ sc5xx_musb_plat.mode = MUSB_PERIPHERAL;
+ mdata->host = musb_register(&sc5xx_musb_plat, &pdata->dev, mregs);
+ if (!mdata->host)
+ return -EIO;
+ }
+ return ret;
+}
+
+static int musb_usb_remove(struct udevice *dev)
+{
+ struct sc5xx_musb_data *pdata = dev_get_priv(dev);
+
+ musb_stop(pdata->mdata.host);
+
+ return 0;
+}
+
+static const struct udevice_id sc5xx_musb_ids[] = {
+ { .compatible = "adi,sc5xx-musb" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_musb) = {
+ .name = "sc5xx-musb",
+ .id = UCLASS_USB,
+ .of_match = sc5xx_musb_ids,
+ .probe = musb_usb_probe,
+ .remove = musb_usb_remove,
+#ifdef CONFIG_USB_MUSB_HOST
+ .ops = &musb_usb_ops,
+#endif
+ .plat_auto = sizeof(struct usb_plat),
+ .priv_auto = sizeof(struct sc5xx_musb_data),
+};
--
2.34.1
More information about the U-Boot
mailing list