[PATCH v4 7/8] board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled

[Wadim Egorov]

Hi Santhosh,

Am 21.10.24 um 06:40 schrieb Santhosh Kumar K:
> As there are few redundant functions in board/ti/*/evm.c files, pull
> them to a common location of access to reuse and include the common file
> to access the functions.
> 
> Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the
> device tree and resize the available amount of DDR, if ECC is enabled.
> Otherwise, fixup the device tree using the regular
> fdt_fixup_memory_banks().
> 
> Also call dram_init_banksize() after every call to
> fixup_ddr_driver_for_ecc() is made so that gd->bd is populated
> correctly.
> 
> Ensure that fixup_ddr_driver_for_ecc() is agnostic to the number of DDR
> controllers present.
> 
> Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
> ---
<snip>

> +obj-y += common.o security.o k3-ddr.o
>   obj-$(CONFIG_SOC_K3_AM62A7) += am62ax/
>   obj-$(CONFIG_SOC_K3_AM62P5) += am62px/
>   obj-$(CONFIG_SOC_K3_AM625) += am62x/
> diff --git a/arch/arm/mach-k3/include/mach/k3-ddr.h b/arch/arm/mach-k3/include/mach/k3-ddr.h
> new file mode 100644
> index 000000000000..754e9ba29dac
> --- /dev/null
<snip>

> +#include <fdt_support.h>
> +#include <dm/uclass.h>
> +#include <k3-ddrss.h>
> +#include <spl.h>
> +
> +#include <asm/arch/k3-ddr.h>
> +
> +int dram_init(void)
> +{
> +        s32 ret;
> +
> +        ret = fdtdec_setup_mem_size_base_lowest();
> +        if (ret)
> +                printf("Error setting up mem size and base. %d\n", ret);
> +
> +        return ret;
> +}
> +
> +int dram_init_banksize(void)
> +{
> +        s32 ret;
> +
> +        ret = fdtdec_setup_memory_banksize();
> +        if (ret)
> +                printf("Error setting up memory banksize. %d\n", ret);
> +
> +        return ret;
> +}
> +Moving dram_init() and dram_init_banksize() into a generic part forces 
every K3 based board to use your implementation.

This also breaks the builds for phycore_am62x, phycore_am64x and also 
the verdin-am62,

   phycore-am62x.c:49: multiple definition of `dram_init'
   phycore-am62x.c:97: multiple definition of `dram_init_banksize

Regards,
Wadim