[PATCH v4 2/8] ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve 'calculations restricted to 32 bits' issue
Manorit Chawdhry
m-chawdhry at ti.com
Wed Oct 23 06:44:00 CEST 2024
Hi Santhosh,
On 10:10-20241021, Santhosh Kumar K wrote:
> As R5 is a 32 bit processor, the RAM banks' base and size calculation
> is restricted to 32 bits, which results in wrong values if bank's base
> is greater than 32 bits or bank's size is greater than or equal to 4GB.
>
> So, add k3_ddrss_ddr_bank_base_size_calc() to get the base address and
> size of RAM's banks from the device tree memory node, and store in a
> 64 bit device private data which can be used for ECC reserved memory
> calculation, Setting ECC range and Fixing up bank size in device tree
> when ECC is enabled.
>
> Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
> ---
> drivers/ram/k3-ddrss/k3-ddrss.c | 72 ++++++++++++++++++++++++++-------
> 1 file changed, 57 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
> index f2ab8cf2b49b..bd6783ebc2cd 100644
> --- a/drivers/ram/k3-ddrss/k3-ddrss.c
> +++ b/drivers/ram/k3-ddrss/k3-ddrss.c
> @@ -147,6 +147,9 @@ struct k3_ddrss_desc {
> struct k3_ddrss_ecc_region ecc_regions[K3_DDRSS_MAX_ECC_REGIONS];
> u64 ecc_reserved_space;
> bool ti_ecc_enabled;
> + unsigned long long ddr_bank_base[CONFIG_NR_DRAM_BANKS];
> + unsigned long long ddr_bank_size[CONFIG_NR_DRAM_BANKS];
> + unsigned long long ddr_ram_size;
Would suggest using u64 ig if you are sending another revision, would be
a bit more readable IMHO.
Regards,
Manorit
> };
>
> struct reginitdata {
> @@ -668,11 +671,54 @@ static void k3_ddrss_lpddr4_preload_full_mem(struct k3_ddrss_desc *ddrss,
> printf("ECC: priming DDR completed in %lu msec\n", get_timer(done));
> }
>
> +static void k3_ddrss_ddr_bank_base_size_calc(struct k3_ddrss_desc *ddrss)
> +{
> + int bank, na, ns, len, parent;
> + const fdt32_t *ptr, *end;
> +
> + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
> + ddrss->ddr_bank_base[bank] = 0;
> + ddrss->ddr_bank_size[bank] = 0;
> + }
> +
> + ofnode mem = ofnode_null();
> +
> + do {
> + mem = ofnode_by_prop_value(mem, "device_type", "memory", 7);
> + } while (!ofnode_is_enabled(mem));
> +
> + const void *fdt = ofnode_to_fdt(mem);
> + int node = ofnode_to_offset(mem);
> + const char *property = "reg";
> +
> + parent = fdt_parent_offset(fdt, node);
> + na = fdt_address_cells(fdt, parent);
> + ns = fdt_size_cells(fdt, parent);
> + ptr = fdt_getprop(fdt, node, property, &len);
> + end = ptr + len / sizeof(*ptr);
> +
> + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
> + if (ptr + na + ns <= end) {
> + if (CONFIG_IS_ENABLED(OF_TRANSLATE))
> + ddrss->ddr_bank_base[bank] = fdt_translate_address(fdt, node, ptr);
> + else
> + ddrss->ddr_bank_base[bank] = fdtdec_get_number(ptr, na);
> +
> + ddrss->ddr_bank_size[bank] = fdtdec_get_number(&ptr[na], ns);
> + }
> +
> + ptr += na + ns;
> + }
> +
> + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++)
> + ddrss->ddr_ram_size += ddrss->ddr_bank_size[bank];
> +}
> +
> static void k3_ddrss_lpddr4_ecc_calc_reserved_mem(struct k3_ddrss_desc *ddrss)
> {
> fdtdec_setup_mem_size_base_lowest();
>
> - ddrss->ecc_reserved_space = gd->ram_size;
> + ddrss->ecc_reserved_space = ddrss->ddr_ram_size;
> do_div(ddrss->ecc_reserved_space, 9);
>
> /* Round to clean number */
> @@ -696,7 +742,7 @@ static void k3_ddrss_lpddr4_ecc_init(struct k3_ddrss_desc *ddrss)
> /* Preload the full memory with 0's using the BIST engine of
> * the LPDDR4 controller.
> */
> - k3_ddrss_lpddr4_preload_full_mem(ddrss, gd->ram_size, 0);
> + k3_ddrss_lpddr4_preload_full_mem(ddrss, ddrss->ddr_ram_size, 0);
>
> /* Clear Error Count Register */
> writel(0x1, base + DDRSS_ECC_1B_ERR_CNT_REG);
> @@ -741,6 +787,8 @@ static int k3_ddrss_probe(struct udevice *dev)
>
> k3_lpddr4_start(ddrss);
>
> + k3_ddrss_ddr_bank_base_size_calc(ddrss);
> +
> if (ddrss->ti_ecc_enabled) {
> if (!ddrss->ddrss_ss_cfg) {
> printf("%s: ss_cfg is required if ecc is enabled but not provided.",
> @@ -761,30 +809,24 @@ static int k3_ddrss_probe(struct udevice *dev)
>
> int k3_ddrss_ddr_fdt_fixup(struct udevice *dev, void *blob, struct bd_info *bd)
> {
> - struct k3_ddrss_desc *ddrss = dev_get_priv(dev);
> - u64 start[CONFIG_NR_DRAM_BANKS];
> - u64 size[CONFIG_NR_DRAM_BANKS];
> int bank;
> + struct k3_ddrss_desc *ddrss = dev_get_priv(dev);
>
> if (ddrss->ecc_reserved_space == 0)
> return 0;
>
> for (bank = CONFIG_NR_DRAM_BANKS - 1; bank >= 0; bank--) {
> - if (ddrss->ecc_reserved_space > bd->bi_dram[bank].size) {
> - ddrss->ecc_reserved_space -= bd->bi_dram[bank].size;
> - bd->bi_dram[bank].size = 0;
> + if (ddrss->ecc_reserved_space > ddrss->ddr_bank_size[bank]) {
> + ddrss->ecc_reserved_space -= ddrss->ddr_bank_size[bank];
> + ddrss->ddr_bank_size[bank] = 0;
> } else {
> - bd->bi_dram[bank].size -= ddrss->ecc_reserved_space;
> + ddrss->ddr_bank_size[bank] -= ddrss->ecc_reserved_space;
> break;
> }
> }
>
> - for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
> - start[bank] = bd->bi_dram[bank].start;
> - size[bank] = bd->bi_dram[bank].size;
> - }
> -
> - return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
> + return fdt_fixup_memory_banks(blob, ddrss->ddr_bank_base,
> + ddrss->ddr_bank_size, CONFIG_NR_DRAM_BANKS);
> }
>
> static int k3_ddrss_get_info(struct udevice *dev, struct ram_info *info)
> --
> 2.34.1
>
More information about the U-Boot
mailing list