[PATCH 4/4] mmc: fsl_esdhc: Convert to use livetree API for fdt access

[Jaehoon Chung]

> -----Original Message-----
> From: Tim Harvey <tharvey at gateworks.com>
> Sent: Thursday, October 24, 2024 5:29 AM
> To: Heiko Schocher <hs at denx.de>; Tom Rini <trini at konsulko.com>; Peng Fan <peng.fan at nxp.com>; Jaehoon
> Chung <jh80.chung at samsung.com>; u-boot at lists.denx.de
> Cc: linux-kernel at vger.kernel.org; Tim Harvey <tharvey at gateworks.com>
> Subject: [PATCH 4/4] mmc: fsl_esdhc: Convert to use livetree API for fdt access
>
> Convert to using livetree API functions.
>
> Without this if livetree is enabled (OF_LIVE) the fsl_esdhc_imx
> driver will fail to read vendor-specific properties from the dt.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/fsl_esdhc_imx.c | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
> index fb410104c1fc..d7a45ef0ad0d 100644
> --- a/drivers/mmc/fsl_esdhc_imx.c
> +++ b/drivers/mmc/fsl_esdhc_imx.c
> @@ -1398,8 +1398,7 @@ static int fsl_esdhc_of_to_plat(struct udevice *dev)
>  	struct udevice *vqmmc_dev;
>  	int ret;
>
> -	const void *fdt = gd->fdt_blob;
> -	int node = dev_of_offset(dev);
> +	ofnode node = dev_ofnode(dev);
>  	fdt_addr_t addr;
>  	unsigned int val;
>
> @@ -1413,15 +1412,15 @@ static int fsl_esdhc_of_to_plat(struct udevice *dev)
>  	priv->dev = dev;
>  	priv->mode = -1;
>
> -	val = fdtdec_get_int(fdt, node, "fsl,tuning-step", 1);
> +	val = ofnode_read_u32_default(node, "fsl,tuning-step", 1);
>  	priv->tuning_step = val;
> -	val = fdtdec_get_int(fdt, node, "fsl,tuning-start-tap",
> -			     ESDHC_TUNING_START_TAP_DEFAULT);
> +	val = ofnode_read_u32_default(node, "fsl,tuning-start-tap",
> +				      ESDHC_TUNING_START_TAP_DEFAULT);
>  	priv->tuning_start_tap = val;
> -	val = fdtdec_get_int(fdt, node, "fsl,strobe-dll-delay-target",
> -			     ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT);
> +	val = ofnode_read_u32_default(node, "fsl,strobe-dll-delay-target",
> +				      ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_DEFAULT);
>  	priv->strobe_dll_delay_target = val;
> -	val = fdtdec_get_int(fdt, node, "fsl,signal-voltage-switch-extra-delay-ms", 0);
> +	val = ofnode_read_u32_default(node, "fsl,signal-voltage-switch-extra-delay-ms", 0);
>  	priv->signal_voltage_switch_extra_delay_ms = val;
>
>  	if (dev_read_bool(dev, "broken-cd"))
> --
> 2.25.1
>