[PATCH RFC 1/6] arm: dts: imx8m: add fit optee node
Yannic Moog
y.moog at phytec.de
Thu Oct 24 09:03:35 CEST 2024
Add tee node in SoC u-boot device trees. Each board adds their specific
load and entry addresses for the op-tee image in the respective
board-u-boot.dtsi file.
Signed-off-by: Yannic Moog <y.moog at phytec.de>
---
arch/arm/dts/imx8mm-u-boot.dtsi | 15 ++++++++++++++-
arch/arm/dts/imx8mn-u-boot.dtsi | 15 ++++++++++++++-
arch/arm/dts/imx8mp-u-boot.dtsi | 15 ++++++++++++++-
3 files changed, 42 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index d31bc822532..e7a6800b771 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -164,6 +164,19 @@
};
#endif
+ tee: tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+
+ tee-os {
+ filename = "tee.bin";
+ optional;
+ };
+ };
+
binman_fip: fip {
arch = "arm64";
compression = "none";
@@ -192,7 +205,7 @@
fdt = "fdt-SEQ";
firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf", "tee";
#endif
};
};
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index 6875c6d44ff..bcb88f0a507 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -235,6 +235,19 @@
};
#endif
+ tee: tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+
+ tee-os {
+ filename = "tee.bin";
+ optional;
+ };
+ };
+
binman_fip: fip {
arch = "arm64";
compression = "none";
@@ -263,7 +276,7 @@
fdt = "fdt-SEQ";
firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf", "tee";
#endif
};
};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index 56749ccacd2..7a9c616fb1a 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -185,6 +185,19 @@
};
#endif
+ tee: tee {
+ description = "OP-TEE";
+ type = "tee";
+ arch = "arm64";
+ compression = "none";
+ os = "tee";
+
+ tee-os {
+ filename = "tee.bin";
+ optional;
+ };
+ };
+
@fdt-SEQ {
description = "NAME";
type = "flat_dt";
@@ -204,7 +217,7 @@
fdt = "fdt-SEQ";
firmware = "uboot";
#ifndef CONFIG_ARMV8_PSCI
- loadables = "atf";
+ loadables = "atf", "tee";
#endif
};
};
--
2.43.0
More information about the U-Boot
mailing list