[PATCH] configs: orangepi-3b-rk3566_defconfig: Enable CONFIG_MULTI_DTB_FIT

[Jianfeng Liu]

Hi,

On Wed, 23 Oct 2024 21:09:34 +0200, Jonas wrote:
>SPL should call spl_simple_fit_parse() -> fit_find_config_node() ->
>board_fit_config_name_match() to select correct FIT configuration and
>load correct FDT for U-Boot proper.
>
>Based on runtime testing making board_fit_config_name_match() always
>return EINVAL in SPL, I did not see this Kconfig option help U-Boot
>proper load correct FDT. It only made my debug log print out:
>
>  fit_find_config_node: Cannot find /configurations node: -1
>
>And U-Boot proper still used the base "Model: Xunlong Orange Pi 3B".
>Not sure if this behavior is different when vendor SPL is used.
>
>From my understanding your issue may have been because of a mixture of
>older SPL and newer U-Boot proper, and was not really fixed by this
>Kconfig option?
>
>Unless there is other uses for MULTI_DTB_FIT, e.g. if it is required to
>load correct FDT from a kernel FIT with multiple FDTs, I think we can
>skip adding this Kconfig option.

Yes, please ignore this patch. I was using an old version of mainlie
u-boot on emmc which did not set correct fit when booting from sd card.

Now without this patch I can boot without issue when booting with emmc
or sd card only. I am sorry for your time on my mistake.

Regards,
Jianfeng