[PATCH 12/14] renesas_rzg2l_smarc_defconfig: Enable networking support

[Paul Barker]

For Ethernet to work on the RZ/G2L board, we need to enable support for
the ksz9131 PHY and enable random MAC address generation (as no MAC
address is programmed into the board).

We also enable the `dhcp`, `mii` and `ping` commands so that Ethernet
functionality can be tested and used to boot Linux.

Signed-off-by: Paul Barker <paul.barker.ct at bp.renesas.com>
---
 configs/renesas_rzg2l_smarc_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/renesas_rzg2l_smarc_defconfig b/configs/renesas_rzg2l_smarc_defconfig
index 7a1224b3f07a..991818e797ea 100644
--- a/configs/renesas_rzg2l_smarc_defconfig
+++ b/configs/renesas_rzg2l_smarc_defconfig
@@ -26,6 +26,9 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
@@ -40,6 +43,7 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_PART=2
 CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_REGMAP=y
 CONFIG_CLK=y
 CONFIG_CLK_RENESAS=y
@@ -49,6 +53,8 @@ CONFIG_DM_I2C=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_RAA215300=y
 CONFIG_DM_REGULATOR=y
-- 
2.43.0