[PATCH v2 05/18] arm64: dts: rockchip: add stdout path on Qnap-TS433

[Kever Yang]

On 2024/10/14 03:24, Heiko Stuebner wrote:
> As most Rockchip boards do, the TS433 also uses uart2 for its serial
> output. Set the correct chosen entry for it.
>
> Tested-by: Uwe Kleine-König <ukleinek at debian.org>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> Link: https://lore.kernel.org/r/20240723195538.1133436-6-heiko@sntech.de
>
> [ upstream commit: e1cb5d8a92e41171bf4d5ddc459bd96372500901 ]
>
> (cherry picked from commit 1e1af2af2192490a3d174624ac1bb976aa6afffa)
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
> index da735c4764f..be1c2286c2d 100644
> --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
> +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
> @@ -13,6 +13,10 @@
>   	model = "Qnap TS-433-4G NAS System 4-Bay";
>   	compatible = "qnap,ts433", "rockchip,rk3568";
>   
> +	chosen {
> +		stdout-path = "serial2:115200n8";
> +	};
> +
>   	dc_12v: regulator-dc-12v {
>   		compatible = "regulator-fixed";
>   		regulator-name = "dc_12v";