[PATCH 0/2] Add generic function for computing ram_top

[Michal Simek]

On 10/25/24 14:15, Sughosh Ganu wrote:
> The board_get_usable_ram_top() function is used by boards to compute
> uppermost address of RAM(ram_top) that is to be used by U-Boot -- this
> need not be the highest RAM address of the platform. This computation
> happens before U-Boot relocates to its final destination address in
> RAM. Certain platforms, like the Xilinx boards were computing the
> ram_top value in an indirect manner, through some LMB API's. Thus it
> is no longer possible to use these LMB API's to compute the ram_top,
> as the LMB module gets initialised only after relocation, and the heap
> memory has been set up. Add generic functionality to compute the value
> of ram_top which can be used by platforms.
> 
> 
> Sughosh Ganu (2):
>    common: memtop: add logic to detect ram_top
>    xilinx: use get_mem_top() to compute ram_top
> 
>   board/xilinx/common/board.c |  25 +++++
>   common/Makefile             |   1 +
>   common/memtop.c             | 186 ++++++++++++++++++++++++++++++++++++
>   include/memtop.h            |  22 +++++
>   4 files changed, 234 insertions(+)
>   create mode 100644 common/memtop.c
>   create mode 100644 include/memtop.h
> 

Tested-by: Michal Simek <michal.simek at amd.com>

Thanks,
Michal