[PATCH v2 1/2] common: memtop: add logic to detect ram_top

Sughosh Ganu sughosh.ganu at linaro.org
Fri Oct 25 19:27:23 CEST 2024


Add generic logic to determine the ram_top value for boards. Earlier,
this was achieved in an indirect manner through a set of LMB API's.
That has since changed so that the LMB code is available only after
relocation. Replace those LMB calls with a single call to
get_mem_top() to determine the value of ram_top.

Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
Reviewed-by: Michal Simek <michal.simek at amd.com>
---
Changes since V1:
Remove the comment above the function definition

 common/Makefile  |   1 +
 common/memtop.c  | 171 +++++++++++++++++++++++++++++++++++++++++++++++
 include/memtop.h |  22 ++++++
 3 files changed, 194 insertions(+)
 create mode 100644 common/memtop.c
 create mode 100644 include/memtop.h

diff --git a/common/Makefile b/common/Makefile
index 2ee5ef9cc6e..35991562a12 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -7,6 +7,7 @@
 ifndef CONFIG_XPL_BUILD
 obj-y += init/
 obj-y += main.o
+obj-y += memtop.o
 obj-y += exports.o
 obj-y += cli_getch.o cli_simple.o cli_readline.o
 obj-$(CONFIG_HUSH_OLD_PARSER) += cli_hush.o
diff --git a/common/memtop.c b/common/memtop.c
new file mode 100644
index 00000000000..841d89e0799
--- /dev/null
+++ b/common/memtop.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+#include <fdt_support.h>
+#include <fdtdec.h>
+#include <memtop.h>
+
+#include <asm/types.h>
+
+#define MEM_RGN_COUNT	16
+
+struct region {
+	phys_addr_t base;
+	phys_size_t size;
+};
+
+struct mem_region {
+	struct region rgn[MEM_RGN_COUNT];
+	uint count;
+};
+
+static void add_mem_region(struct mem_region *mem_rgn, phys_addr_t base,
+			   phys_size_t size)
+{
+	long i;
+
+	for (i = mem_rgn->count; i >= 0; i--) {
+		if (i && base < mem_rgn->rgn[i - 1].base) {
+			mem_rgn->rgn[i] = mem_rgn->rgn[i - 1];
+		} else {
+			mem_rgn->rgn[i].base = base;
+			mem_rgn->rgn[i].size = size;
+			break;
+		}
+	}
+
+	mem_rgn->count++;
+}
+
+static void mem_regions_init(struct mem_region *mem)
+{
+	uint i;
+
+	mem->count = 0;
+	for (i = 0; i < MEM_RGN_COUNT; i++) {
+		mem->rgn[i].base = 0;
+		mem->rgn[i].size = 0;
+	}
+}
+
+static int fdt_add_reserved_regions(struct mem_region *free_mem,
+				    struct mem_region *reserved_mem,
+				    void *fdt_blob)
+{
+	u64 addr, size;
+	int i, total, ret;
+	int nodeoffset, subnode;
+	struct fdt_resource res;
+
+	if (fdt_check_header(fdt_blob) != 0)
+		return -1;
+
+	/* process memreserve sections */
+	total = fdt_num_mem_rsv(fdt_blob);
+	assert_noisy(total < MEM_RGN_COUNT);
+	for (i = 0; i < total; i++) {
+		if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
+			continue;
+		add_mem_region(reserved_mem, addr, size);
+	}
+
+	i = 0;
+	/* process reserved-memory */
+	nodeoffset = fdt_subnode_offset(fdt_blob, 0, "reserved-memory");
+	if (nodeoffset >= 0) {
+		subnode = fdt_first_subnode(fdt_blob, nodeoffset);
+		while (subnode >= 0) {
+			/* check if this subnode has a reg property */
+			ret = fdt_get_resource(fdt_blob, subnode, "reg", 0,
+					       &res);
+			if (!ret && fdtdec_get_is_enabled(fdt_blob, subnode)) {
+				addr = res.start;
+				size = res.end - res.start + 1;
+				assert_noisy(i < MEM_RGN_COUNT);
+				add_mem_region(reserved_mem, addr, size);
+			}
+
+			subnode = fdt_next_subnode(fdt_blob, subnode);
+			++i;
+		}
+	}
+
+	return 0;
+}
+
+static long addrs_overlap(phys_addr_t base1, phys_size_t size1,
+			  phys_addr_t base2, phys_size_t size2)
+{
+	const phys_addr_t base1_end = base1 + size1 - 1;
+	const phys_addr_t base2_end = base2 + size2 - 1;
+
+	return ((base1 <= base2_end) && (base2 <= base1_end));
+}
+
+static long region_overlap_check(struct mem_region *mem_rgn, phys_addr_t base,
+				 phys_size_t size)
+{
+	unsigned long i;
+	struct region *rgn = mem_rgn->rgn;
+
+	for (i = 0; i < mem_rgn->count; i++) {
+		phys_addr_t rgnbase = rgn[i].base;
+		phys_size_t rgnsize = rgn[i].size;
+
+		if (addrs_overlap(base, size, rgnbase, rgnsize))
+			break;
+	}
+
+	return (i < mem_rgn->count) ? i : -1;
+}
+
+static int find_ram_top(struct mem_region *free_mem,
+			struct mem_region *reserved_mem, phys_size_t size)
+{
+	long i, rgn;
+	phys_addr_t base = 0;
+	phys_addr_t res_base;
+
+	for (i = free_mem->count - 1; i >= 0; i--) {
+		phys_addr_t rgnbase = free_mem->rgn[i].base;
+		phys_size_t rgnsize = free_mem->rgn[i].size;
+
+		if (rgnsize < size)
+			continue;
+
+		base = rgnbase + rgnsize - size;
+		while (base && rgnbase <= base) {
+			rgn = region_overlap_check(reserved_mem, base, size);
+			if (rgn < 0)
+				return base;
+
+			res_base = reserved_mem->rgn[rgn].base;
+			if (res_base < size)
+				break;
+			base = res_base - size;
+		}
+	}
+
+	return 0;
+}
+
+phys_addr_t get_mem_top(phys_addr_t ram_start, phys_size_t ram_size,
+			phys_size_t size, void *fdt)
+{
+	int i;
+	struct mem_region free_mem;
+	struct mem_region reserved_mem;
+
+	mem_regions_init(&free_mem);
+	mem_regions_init(&reserved_mem);
+
+	add_mem_region(&free_mem, ram_start, ram_size);
+
+	i = fdt_add_reserved_regions(&free_mem, &reserved_mem, fdt);
+	if (i < 0)
+		return 0;
+
+	return find_ram_top(&free_mem, &reserved_mem, size);
+}
diff --git a/include/memtop.h b/include/memtop.h
new file mode 100644
index 00000000000..28f62e24ea7
--- /dev/null
+++ b/include/memtop.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024, Linaro Limited
+ */
+
+/**
+ * get_mem_top() - Compute the value of ram_top
+ * @ram_start:	Start of RAM
+ * @ram_size:	RAM size
+ * @size:	Minimum RAM size requested
+ * @fdt:	FDT blob
+ *
+ * The function computes the top address of RAM memory that can be
+ * used by U-Boot. This is being done by going through the list of
+ * reserved memory regions specified in the devicetree blob passed
+ * to the function. The logic used here is derived from the lmb
+ * allocation function.
+ *
+ * Return: address of ram top on success, 0 on failure
+ */
+phys_addr_t get_mem_top(phys_addr_t ram_start, phys_size_t ram_size,
+			phys_size_t size, void *fdt);
-- 
2.34.1



More information about the U-Boot mailing list