[PATCH v2 2/5] arm64: imx: imx8mp: Disable PCI support on DH i.MX8MP DHCOM SoM on DRC02 board

[Marek Vasut]

The DRC02 carrier board does not expose PCIe in any way, disable PCIe support.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Andreas Geisreiter <ageisreiter at dh-electronics.de>
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Quentin Schulz <quentin.schulz at cherry.de>
Cc: Sean Anderson <seanga2 at gmail.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Sumit Garg <sumit.garg at linaro.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at dh-electronics.com
Cc: u-boot at lists.denx.de
---
V2: No change
---
 configs/imx8mp_dhcom_drc02_defconfig | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/configs/imx8mp_dhcom_drc02_defconfig b/configs/imx8mp_dhcom_drc02_defconfig
index ffc9bf0e1c2..366e5bbbb74 100644
--- a/configs/imx8mp_dhcom_drc02_defconfig
+++ b/configs/imx8mp_dhcom_drc02_defconfig
@@ -35,7 +35,6 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_ENV_OFFSET_REDUND=0xFF0000
 CONFIG_IMX_BOOTAUX=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
@@ -105,7 +104,6 @@ CONFIG_CMD_BKOPS_ENABLE=y
 CONFIG_MMC_SPEED_MODE_SET=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_PART=y
-CONFIG_CMD_PCI=y
 CONFIG_CMD_READ=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
@@ -220,10 +218,7 @@ CONFIG_DWC_ETH_QOS_IMX=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
-CONFIG_NVME_PCI=y
-CONFIG_PCIE_DW_IMX=y
 CONFIG_PHY_IMX8MQ_USB=y
-CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
-- 
2.45.2