[PATCH] imx8m: set sane default value for SPL_LOAD_FIT_ADDRESS

[Fabio Estevam]

On Thu, Oct 24, 2024 at 8:51 AM Marek Vasut <marex at denx.de> wrote:
>
> On 10/24/24 12:01 PM, Rasmus Villemoes wrote:
> > I enabled IMX_HAB on an imx8mp board, but even though I knew about the
> > implementation, I forgot that I had to provide a sane value for
> > SPL_LOAD_FIT_ADDRESS. The help text for IMX_HAB doesn't mention this
> > implicit requirement, and there's no build-time warning; the default
> > 0x0 value just ends up being returned from
> > board_spl_fit_buffer_addr(), obviously resulting in a non-booting
> > board.
> >
> > The existing imx8m* board configs that set a non-zero value currently
> > all use 0x44000000. The actual value doesn't matter too much, but 0 is
> > always wrong for imx8m platforms. So just use 0x44000000 as default
> > for those platforms.
> >
> > Signed-off-by: Rasmus Villemoes <ravi at prevas.dk>

Applied, thanks.