[PATCH] riscv64: dts: starfive: Mars ethernet0 phy delay values sync with upstream Linux

[E Shattow]

Milk-V Mars vendor board support package has value 0xa (multiplier=150) for both
rx and tx delay. Upstream Linux has this as 1500 for both rx and tx delay. There
is no documentation for why this should remain 1900 so correct it now. Mars CM
and Mars CM Lite follow the same network phy delay values as Mars in the vendor
board support package.

Fixes: 92db23f7660de5897c8e3b91489b5b5780ffcd16
Signed-off-by: E Shattow <e at freeshell.de>
---
 board/starfive/visionfive2/spl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/starfive/visionfive2/spl.c b/board/starfive/visionfive2/spl.c
index 54c23ed2e1..f63f36c7f7 100644
--- a/board/starfive/visionfive2/spl.c
+++ b/board/starfive/visionfive2/spl.c
@@ -41,7 +41,7 @@ static const struct starfive_vf2_pro milk_v_mars[] = {
 	{"/soc/ethernet at 16030000/mdio/ethernet-phy at 0",
 		"motorcomm,rx-data-drv-microamp", "2910"},
 	{"/soc/ethernet at 16030000/mdio/ethernet-phy at 0",
-		"rx-internal-delay-ps", "1900"},
+		"rx-internal-delay-ps", "1500"},
 	{"/soc/ethernet at 16030000/mdio/ethernet-phy at 0",
 		"tx-internal-delay-ps", "1500"},
 };
-- 
2.45.2