[PATCH v4 10/11] ARM: socfpga: apply binman approach to fpga parts

[Lothar Rubusch]

Convert the .its based approach to binman instruction covered in the
device tree generation. This reduces additional instructions and
integrates the former separate build step into building the u-boot.

Signed-off-by: Lothar Rubusch <l.rubusch at gmail.com>
---
 ..._arria10_enclustra_mercury_aa1-u-boot.dtsi | 44 +++++++++++++++++++
 arch/arm/mach-socfpga/Kconfig                 |  1 +
 board/enclustra/mercury_aa1/fpga.its          | 32 --------------
 doc/board/enclustra/mercury-aa1.rst           |  3 ++
 4 files changed, 48 insertions(+), 32 deletions(-)
 delete mode 100644 board/enclustra/mercury_aa1/fpga.its

diff --git a/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1-u-boot.dtsi b/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1-u-boot.dtsi
index 6e38286572..9587d2dddb 100644
--- a/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1-u-boot.dtsi
+++ b/arch/arm/dts/socfpga_arria10_enclustra_mercury_aa1-u-boot.dtsi
@@ -18,6 +18,10 @@
 		compatible = "u-boot,fs-loader";
 		phandlepart = <&mmc 1>;
 	};
+
+	binman: binman {
+		multiple-images;
+	};
 };
 
 &fpga_mgr {
@@ -43,3 +47,43 @@
 };
 
 #endif
+
+&binman {
+	u-boot {
+		filename = "fpga.itb";
+
+		fit {
+			description = "FIT image with FPGA bistream";
+			fit,external-offset = <0>;
+			#address-cells = <1>;
+
+			images {
+				fpga-periph-1 {
+					description = "FPGA peripheral bitstream";
+					type = "fpga";
+					compression = "none";
+					blob-ext {
+						filename = "bitstream.periph.rbf";
+					};
+				};
+
+				fpga-core-1 {
+					description = "FPGA core bitstream";
+					type = "fpga";
+					compression = "none";
+					blob-ext {
+						filename = "bitstream.core.rbf";
+					};
+				};
+			};
+
+			configurations {
+				default = "config-1";
+				config-1 {
+					description = "Boot with FPGA early IO release config";
+					fpga = "fpga-periph-1", "fpga-core-1";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 60d8c889dc..e7236a56f7 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -186,6 +186,7 @@ config TARGET_SOCFPGA_EBV_SOCRATES
 
 config TARGET_SOCFPGA_ENCLUSTRA_MERCURY_AA1
 	bool "Enclustra Mercury+ AA1"
+	select BINMAN
 	select TARGET_SOCFPGA_ARRIA10
 
 config TARGET_SOCFPGA_IS1
diff --git a/board/enclustra/mercury_aa1/fpga.its b/board/enclustra/mercury_aa1/fpga.its
deleted file mode 100644
index cb42d61fbd..0000000000
--- a/board/enclustra/mercury_aa1/fpga.its
+++ /dev/null
@@ -1,32 +0,0 @@
-/dts-v1/;
-
-/ {
-	description = "FIT image with FPGA bistream";
-	#address-cells = <1>;
-
-	images {
-		fpga-periph-1 {
-			description = "FPGA peripheral bitstream";
-			data = /incbin/("../../../bitstream.periph.rbf");
-			type = "fpga";
-			arch = "arm";
-			compression = "none";
-		};
-
-		fpga-core-1 {
-			description = "FPGA core bitstream";
-			data = /incbin/("../../../bitstream.core.rbf");
-			type = "fpga";
-			arch = "arm";
-			compression = "none";
-		};
-	};
-
-	configurations {
-		default = "config-1";
-		config-1 {
-			description = "Boot with FPGA early IO release config";
-			fpga = "fpga-periph-1", "fpga-core-1";
-		};
-	};
-};
diff --git a/doc/board/enclustra/mercury-aa1.rst b/doc/board/enclustra/mercury-aa1.rst
index cba36aae2e..f3c629d42e 100644
--- a/doc/board/enclustra/mercury-aa1.rst
+++ b/doc/board/enclustra/mercury-aa1.rst
@@ -66,6 +66,9 @@ Build u-boot. Source your favorite toolchain for ARM first.
     $ make socfpga_enclustra_mercury_aa1_defconfig
     $ make -j8
 
+Note: Call ``make`` with ``NO_PYTHON=1`` where python tools unnecessarily falls
+back into additional python setup.
+
 Setup and compile a boot script as needed. Depending on the boot-mode select
 ``sd-aa1.cmd`` for SD/eMMC, or ``qspi-aa1.cmd`` for QSPI flash.
 
-- 
2.25.1