[PATCH 07/14] net: phy: ksz90x1: Load skew values from device tree

[Marek Vasut]

On 10/24/24 5:24 PM, Paul Barker wrote:
> Various signal skew values may be set in the device tree for the ksz9131
> Ethernet PHY. For example, the RZ/G2L board requires non-default values
> for rxc-skew-psec & txc-skew-psec.
> 
> This is based on the ksz9131 phy driver in Linux v6.11.
> 
> Signed-off-by: Paul Barker <paul.barker.ct at bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>