[PATCH v3 05/18] arm64: dts: rockchip: add stdout path on Qnap-TS433

[Heiko Stuebner]

As most Rockchip boards do, the TS433 also uses uart2 for its serial
output. Set the correct chosen entry for it.

Tested-by: Uwe Kleine-König <ukleinek at debian.org>
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-6-heiko@sntech.de

[ upstream commit: e1cb5d8a92e41171bf4d5ddc459bd96372500901 ]

(cherry picked from commit 1e1af2af2192490a3d174624ac1bb976aa6afffa)
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
 dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index da735c4764f..be1c2286c2d 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -13,6 +13,10 @@
 	model = "Qnap TS-433-4G NAS System 4-Bay";
 	compatible = "qnap,ts433", "rockchip,rk3568";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	dc_12v: regulator-dc-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";
-- 
2.45.2