[PATCH 1/2] ARM: dts: Drop unused RZ/G2L devicetrees
Paul Barker
paul.barker.ct at bp.renesas.com
Wed Oct 30 11:32:33 CET 2024
We are now using the dts/upstream subtree for the RZ/G2L SoC family.
Signed-off-by: Paul Barker <paul.barker.ct at bp.renesas.com>
---
arch/arm/dts/Makefile | 3 -
arch/arm/dts/r9a07g044.dtsi | 1273 ---------------------
arch/arm/dts/r9a07g044l2-smarc.dts | 39 -
arch/arm/dts/r9a07g044l2.dtsi | 13 -
arch/arm/dts/rz-smarc-common.dtsi | 183 ---
arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 157 ---
arch/arm/dts/rzg2l-smarc-som.dtsi | 371 ------
arch/arm/dts/rzg2l-smarc.dtsi | 181 ---
8 files changed, 2220 deletions(-)
delete mode 100644 arch/arm/dts/r9a07g044.dtsi
delete mode 100644 arch/arm/dts/r9a07g044l2-smarc.dts
delete mode 100644 arch/arm/dts/r9a07g044l2.dtsi
delete mode 100644 arch/arm/dts/rz-smarc-common.dtsi
delete mode 100644 arch/arm/dts/rzg2l-smarc-pinfunction.dtsi
delete mode 100644 arch/arm/dts/rzg2l-smarc-som.dtsi
delete mode 100644 arch/arm/dts/rzg2l-smarc.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index aeccfa93fc53..e0cc9937acb4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -979,9 +979,6 @@ dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
imxrt1020-evk.dtb \
imxrt1170-evk.dtb \
-dtb-$(CONFIG_TARGET_RZG2L) += \
- r9a07g044l2-smarc.dts
-
ifdef CONFIG_RCAR_64
DTC_FLAGS += -R 4 -p 0x1000
endif
diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi
deleted file mode 100644
index 66f68fc2b241..000000000000
--- a/arch/arm/dts/r9a07g044.dtsi
+++ /dev/null
@@ -1,1273 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
- *
- * Copyright (C) 2021 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/r9a07g044-cpg.h>
-
-/ {
- compatible = "renesas,r9a07g044";
- #address-cells = <2>;
- #size-cells = <2>;
-
- audio_clk1: audio1-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by boards that provide it */
- clock-frequency = <0>;
- };
-
- audio_clk2: audio2-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by boards that provide it */
- clock-frequency = <0>;
- };
-
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
- extal_clk: extal-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board */
- clock-frequency = <0>;
- };
-
- cluster0_opp: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-150000000 {
- opp-hz = /bits/ 64 <150000000>;
- opp-microvolt = <1100000>;
- clock-latency-ns = <300000>;
- };
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <1100000>;
- clock-latency-ns = <300000>;
- };
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <1100000>;
- clock-latency-ns = <300000>;
- };
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1100000>;
- clock-latency-ns = <300000>;
- opp-suspend;
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu0>;
- };
- core1 {
- cpu = <&cpu1>;
- };
- };
- };
-
- cpu0: cpu at 0 {
- compatible = "arm,cortex-a55";
- reg = <0>;
- device_type = "cpu";
- #cooling-cells = <2>;
- next-level-cache = <&L3_CA55>;
- enable-method = "psci";
- clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
- operating-points-v2 = <&cluster0_opp>;
- };
-
- cpu1: cpu at 100 {
- compatible = "arm,cortex-a55";
- reg = <0x100>;
- device_type = "cpu";
- next-level-cache = <&L3_CA55>;
- enable-method = "psci";
- clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
- operating-points-v2 = <&cluster0_opp>;
- };
-
- L3_CA55: cache-controller-0 {
- compatible = "cache";
- cache-unified;
- cache-size = <0x40000>;
- cache-level = <3>;
- };
- };
-
- gpu_opp_table: opp-table-1 {
- compatible = "operating-points-v2";
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <1100000>;
- };
-
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <1100000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <1100000>;
- };
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <1100000>;
- };
-
- opp-125000000 {
- opp-hz = /bits/ 64 <125000000>;
- opp-microvolt = <1100000>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <1100000>;
- };
-
- opp-62500000 {
- opp-hz = /bits/ 64 <62500000>;
- opp-microvolt = <1100000>;
- };
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- opp-microvolt = <1100000>;
- };
- };
-
- pmu {
- compatible = "arm,cortex-a55-pmu";
- interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
- };
-
- psci {
- compatible = "arm,psci-1.0", "arm,psci-0.2";
- method = "smc";
- };
-
- soc: soc {
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- mtu3: timer at 10001200 {
- compatible = "renesas,r9a07g044-mtu3",
- "renesas,rz-mtu3";
- reg = <0 0x10001200 0 0xb00>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
- "tciv0", "tgie0", "tgif0",
- "tgia1", "tgib1", "tciv1", "tciu1",
- "tgia2", "tgib2", "tciv2", "tciu2",
- "tgia3", "tgib3", "tgic3", "tgid3",
- "tciv3",
- "tgia4", "tgib4", "tgic4", "tgid4",
- "tciv4",
- "tgiu5", "tgiv5", "tgiw5",
- "tgia6", "tgib6", "tgic6", "tgid6",
- "tciv6",
- "tgia7", "tgib7", "tgic7", "tgid7",
- "tciv7",
- "tgia8", "tgib8", "tgic8", "tgid8",
- "tciv8", "tciu8";
- clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- ssi0: ssi at 10049c00 {
- compatible = "renesas,r9a07g044-ssi",
- "renesas,rz-ssi";
- reg = <0 0x10049c00 0 0x400>;
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "int_req", "dma_rx", "dma_tx";
- clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
- <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
- <&audio_clk1>, <&audio_clk2>;
- clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
- resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
- dmas = <&dmac 0x2655>, <&dmac 0x2656>;
- dma-names = "tx", "rx";
- power-domains = <&cpg>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- ssi1: ssi at 1004a000 {
- compatible = "renesas,r9a07g044-ssi",
- "renesas,rz-ssi";
- reg = <0 0x1004a000 0 0x400>;
- interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "int_req", "dma_rx", "dma_tx";
- clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
- <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
- <&audio_clk1>, <&audio_clk2>;
- clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
- resets = <&cpg R9A07G044_SSI1_RST_M2_REG>;
- dmas = <&dmac 0x2659>, <&dmac 0x265a>;
- dma-names = "tx", "rx";
- power-domains = <&cpg>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- ssi2: ssi at 1004a400 {
- compatible = "renesas,r9a07g044-ssi",
- "renesas,rz-ssi";
- reg = <0 0x1004a400 0 0x400>;
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "int_req", "dma_rt";
- clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
- <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
- <&audio_clk1>, <&audio_clk2>;
- clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
- resets = <&cpg R9A07G044_SSI2_RST_M2_REG>;
- dmas = <&dmac 0x265f>;
- dma-names = "rt";
- power-domains = <&cpg>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- ssi3: ssi at 1004a800 {
- compatible = "renesas,r9a07g044-ssi",
- "renesas,rz-ssi";
- reg = <0 0x1004a800 0 0x400>;
- interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "int_req", "dma_rx", "dma_tx";
- clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
- <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
- <&audio_clk1>, <&audio_clk2>;
- clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
- resets = <&cpg R9A07G044_SSI3_RST_M2_REG>;
- dmas = <&dmac 0x2661>, <&dmac 0x2662>;
- dma-names = "tx", "rx";
- power-domains = <&cpg>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- spi0: spi at 1004ac00 {
- compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
- reg = <0 0x1004ac00 0 0x400>;
- interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error", "rx", "tx";
- clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>;
- resets = <&cpg R9A07G044_RSPI0_RST>;
- dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
- dma-names = "tx", "rx";
- power-domains = <&cpg>;
- num-cs = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi at 1004b000 {
- compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
- reg = <0 0x1004b000 0 0x400>;
- interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error", "rx", "tx";
- clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>;
- resets = <&cpg R9A07G044_RSPI1_RST>;
- dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
- dma-names = "tx", "rx";
- power-domains = <&cpg>;
- num-cs = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi2: spi at 1004b400 {
- compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
- reg = <0 0x1004b400 0 0x400>;
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error", "rx", "tx";
- clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>;
- resets = <&cpg R9A07G044_RSPI2_RST>;
- dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
- dma-names = "tx", "rx";
- power-domains = <&cpg>;
- num-cs = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- scif0: serial at 1004b800 {
- compatible = "renesas,scif-r9a07g044";
- reg = <0 0x1004b800 0 0x400>;
- interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi",
- "bri", "dri", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>;
- status = "disabled";
- };
-
- scif1: serial at 1004bc00 {
- compatible = "renesas,scif-r9a07g044";
- reg = <0 0x1004bc00 0 0x400>;
- interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi",
- "bri", "dri", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>;
- status = "disabled";
- };
-
- scif2: serial at 1004c000 {
- compatible = "renesas,scif-r9a07g044";
- reg = <0 0x1004c000 0 0x400>;
- interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi",
- "bri", "dri", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>;
- status = "disabled";
- };
-
- scif3: serial at 1004c400 {
- compatible = "renesas,scif-r9a07g044";
- reg = <0 0x1004c400 0 0x400>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi",
- "bri", "dri", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>;
- status = "disabled";
- };
-
- scif4: serial at 1004c800 {
- compatible = "renesas,scif-r9a07g044";
- reg = <0 0x1004c800 0 0x400>;
- interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi",
- "bri", "dri", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>;
- status = "disabled";
- };
-
- sci0: serial at 1004d000 {
- compatible = "renesas,r9a07g044-sci", "renesas,sci";
- reg = <0 0x1004d000 0 0x400>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCI0_RST>;
- status = "disabled";
- };
-
- sci1: serial at 1004d400 {
- compatible = "renesas,r9a07g044-sci", "renesas,sci";
- reg = <0 0x1004d400 0 0x400>;
- interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "eri", "rxi", "txi", "tei";
- clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>;
- clock-names = "fck";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_SCI1_RST>;
- status = "disabled";
- };
-
- canfd: can at 10050000 {
- compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
- reg = <0 0x10050000 0 0x8000>;
- interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "g_err", "g_recc",
- "ch0_err", "ch0_rec", "ch0_trx",
- "ch1_err", "ch1_rec", "ch1_trx";
- clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
- <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
- <&can_clk>;
- clock-names = "fck", "canfd", "can_clk";
- assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
- assigned-clock-rates = <50000000>;
- resets = <&cpg R9A07G044_CANFD_RSTP_N>,
- <&cpg R9A07G044_CANFD_RSTC_N>;
- reset-names = "rstp_n", "rstc_n";
- power-domains = <&cpg>;
- status = "disabled";
-
- channel0 {
- status = "disabled";
- };
- channel1 {
- status = "disabled";
- };
- };
-
- i2c0: i2c at 10058000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
- reg = <0 0x10058000 0 0x400>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti",
- "naki", "ali", "tmoi";
- clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
- clock-frequency = <100000>;
- resets = <&cpg R9A07G044_I2C0_MRST>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- i2c1: i2c at 10058400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
- reg = <0 0x10058400 0 0x400>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti",
- "naki", "ali", "tmoi";
- clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
- clock-frequency = <100000>;
- resets = <&cpg R9A07G044_I2C1_MRST>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- i2c2: i2c at 10058800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
- reg = <0 0x10058800 0 0x400>;
- interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti",
- "naki", "ali", "tmoi";
- clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
- clock-frequency = <100000>;
- resets = <&cpg R9A07G044_I2C2_MRST>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- i2c3: i2c at 10058c00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
- reg = <0 0x10058c00 0 0x400>;
- interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tei", "ri", "ti", "spi", "sti",
- "naki", "ali", "tmoi";
- clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
- clock-frequency = <100000>;
- resets = <&cpg R9A07G044_I2C3_MRST>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- adc: adc at 10059000 {
- compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
- reg = <0 0x10059000 0 0x400>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
- clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
- <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
- clock-names = "adclk", "pclk";
- resets = <&cpg R9A07G044_ADC_PRESETN>,
- <&cpg R9A07G044_ADC_ADRST_N>;
- reset-names = "presetn", "adrst-n";
- power-domains = <&cpg>;
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel at 0 {
- reg = <0>;
- };
- channel at 1 {
- reg = <1>;
- };
- channel at 2 {
- reg = <2>;
- };
- channel at 3 {
- reg = <3>;
- };
- channel at 4 {
- reg = <4>;
- };
- channel at 5 {
- reg = <5>;
- };
- channel at 6 {
- reg = <6>;
- };
- channel at 7 {
- reg = <7>;
- };
- };
-
- tsu: thermal at 10059400 {
- compatible = "renesas,r9a07g044-tsu",
- "renesas,rzg2l-tsu";
- reg = <0 0x10059400 0 0x400>;
- clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
- resets = <&cpg R9A07G044_TSU_PRESETN>;
- power-domains = <&cpg>;
- #thermal-sensor-cells = <1>;
- };
-
- sbc: spi at 10060000 {
- compatible = "renesas,r9a07g044-rpc-if",
- "renesas,rzg2l-rpc-if";
- reg = <0 0x10060000 0 0x10000>,
- <0 0x20000000 0 0x10000000>,
- <0 0x10070000 0 0x10000>;
- reg-names = "regs", "dirmap", "wbuf";
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>,
- <&cpg CPG_MOD R9A07G044_SPI_CLK>;
- resets = <&cpg R9A07G044_SPI_RST>;
- power-domains = <&cpg>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- cru: video at 10830000 {
- compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
- reg = <0 0x10830000 0 0x400>;
- clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
- <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
- <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
- clock-names = "video", "apb", "axi";
- interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
- resets = <&cpg R9A07G044_CRU_PRESETN>,
- <&cpg R9A07G044_CRU_ARESETN>;
- reset-names = "presetn", "aresetn";
- power-domains = <&cpg>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg = <0>;
- cruparallel: endpoint at 0 {
- reg = <0>;
- };
- };
-
- port at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg = <1>;
- crucsi2: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&csi2cru>;
- };
- };
- };
- };
-
- csi2: csi2 at 10830400 {
- compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
- reg = <0 0x10830400 0 0xfc00>;
- interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
- <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
- <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
- clock-names = "system", "video", "apb";
- resets = <&cpg R9A07G044_CRU_PRESETN>,
- <&cpg R9A07G044_CRU_CMN_RSTB>;
- reset-names = "presetn", "cmn-rstb";
- power-domains = <&cpg>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- };
-
- port at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- csi2cru: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&crucsi2>;
- };
- };
- };
- };
-
- dsi: dsi at 10850000 {
- compatible = "renesas,r9a07g044-mipi-dsi",
- "renesas,rzg2l-mipi-dsi";
- reg = <0 0x10850000 0 0x20000>;
- interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "seq0", "seq1", "vin1", "rcv",
- "ferr", "ppi", "debug";
- clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
- <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
- <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
- <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
- <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
- <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
- clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
- resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
- <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
- <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
- reset-names = "rst", "arst", "prst";
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- vspd: vsp at 10870000 {
- compatible = "renesas,r9a07g044-vsp2";
- reg = <0 0x10870000 0 0x10000>;
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
- <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
- <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
- clock-names = "aclk", "pclk", "vclk";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_LCDC_RESET_N>;
- renesas,fcp = <&fcpvd>;
- };
-
- fcpvd: fcp at 10880000 {
- compatible = "renesas,r9a07g044-fcpvd",
- "renesas,fcpv";
- reg = <0 0x10880000 0 0x10000>;
- clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
- <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
- <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
- clock-names = "aclk", "pclk", "vclk";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_LCDC_RESET_N>;
- };
-
- cpg: clock-controller at 11010000 {
- compatible = "renesas,r9a07g044-cpg";
- reg = <0 0x11010000 0 0x10000>;
- clocks = <&extal_clk>;
- clock-names = "extal";
- #clock-cells = <2>;
- #reset-cells = <1>;
- #power-domain-cells = <0>;
- };
-
- sysc: system-controller at 11020000 {
- compatible = "renesas,r9a07g044-sysc";
- reg = <0 0x11020000 0 0x10000>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "lpm_int", "ca55stbydone_int",
- "cm33stbyr_int", "ca55_deny";
- status = "disabled";
- };
-
- pinctrl: pinctrl at 11030000 {
- compatible = "renesas,r9a07g044-pinctrl";
- reg = <0 0x11030000 0 0x10000>;
- gpio-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- interrupt-parent = <&irqc>;
- interrupt-controller;
- gpio-ranges = <&pinctrl 0 0 392>;
- clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_GPIO_RSTN>,
- <&cpg R9A07G044_GPIO_PORT_RESETN>,
- <&cpg R9A07G044_GPIO_SPARE_RESETN>;
- };
-
- irqc: interrupt-controller at 110a0000 {
- compatible = "renesas,r9a07g044-irqc",
- "renesas,rzg2l-irqc";
- #interrupt-cells = <2>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0 0x110a0000 0 0x10000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
- <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
- clock-names = "clk", "pclk";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_IA55_RESETN>;
- };
-
- dmac: dma-controller at 11820000 {
- compatible = "renesas,r9a07g044-dmac",
- "renesas,rz-dmac";
- reg = <0 0x11820000 0 0x10000>,
- <0 0x11830000 0 0x10000>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14", "ch15";
- clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
- <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
- clock-names = "main", "register";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_DMAC_ARESETN>,
- <&cpg R9A07G044_DMAC_RST_ASYNC>;
- reset-names = "arst", "rst_async";
- #dma-cells = <1>;
- dma-channels = <16>;
- };
-
- gpu: gpu at 11840000 {
- compatible = "renesas,r9a07g044-mali",
- "arm,mali-bifrost";
- reg = <0x0 0x11840000 0x0 0x10000>;
- interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "job", "mmu", "gpu", "event";
- clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>,
- <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>,
- <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>;
- clock-names = "gpu", "bus", "bus_ace";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_GPU_RESETN>,
- <&cpg R9A07G044_GPU_AXI_RESETN>,
- <&cpg R9A07G044_GPU_ACE_RESETN>;
- reset-names = "rst", "axi_rst", "ace_rst";
- operating-points-v2 = <&gpu_opp_table>;
- };
-
- gic: interrupt-controller at 11900000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x0 0x11900000 0 0x40000>,
- <0x0 0x11940000 0 0x60000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
- };
-
- sdhi0: mmc at 11c00000 {
- compatible = "renesas,sdhi-r9a07g044",
- "renesas,rcar-gen3-sdhi";
- reg = <0x0 0x11c00000 0 0x10000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>,
- <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>,
- <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>,
- <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>;
- clock-names = "core", "clkh", "cd", "aclk";
- resets = <&cpg R9A07G044_SDHI0_IXRST>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- sdhi1: mmc at 11c10000 {
- compatible = "renesas,sdhi-r9a07g044",
- "renesas,rcar-gen3-sdhi";
- reg = <0x0 0x11c10000 0 0x10000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>,
- <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>,
- <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>,
- <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>;
- clock-names = "core", "clkh", "cd", "aclk";
- resets = <&cpg R9A07G044_SDHI1_IXRST>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- eth0: ethernet at 11c20000 {
- compatible = "renesas,r9a07g044-gbeth",
- "renesas,rzg2l-gbeth";
- reg = <0 0x11c20000 0 0x10000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mux", "fil", "arp_ns";
- phy-mode = "rgmii";
- clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>,
- <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>,
- <&cpg CPG_CORE R9A07G044_CLK_HP>;
- clock-names = "axi", "chi", "refclk";
- resets = <&cpg R9A07G044_ETH0_RST_HW_N>;
- power-domains = <&cpg>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- eth1: ethernet at 11c30000 {
- compatible = "renesas,r9a07g044-gbeth",
- "renesas,rzg2l-gbeth";
- reg = <0 0x11c30000 0 0x10000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mux", "fil", "arp_ns";
- phy-mode = "rgmii";
- clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>,
- <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>,
- <&cpg CPG_CORE R9A07G044_CLK_HP>;
- clock-names = "axi", "chi", "refclk";
- resets = <&cpg R9A07G044_ETH1_RST_HW_N>;
- power-domains = <&cpg>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- phyrst: usbphy-ctrl at 11c40000 {
- compatible = "renesas,r9a07g044-usbphy-ctrl",
- "renesas,rzg2l-usbphy-ctrl";
- reg = <0 0x11c40000 0 0x10000>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
- resets = <&cpg R9A07G044_USB_PRESETN>;
- power-domains = <&cpg>;
- #reset-cells = <1>;
- status = "disabled";
- };
-
- ohci0: usb at 11c50000 {
- compatible = "generic-ohci";
- reg = <0 0x11c50000 0 0x100>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
- resets = <&phyrst 0>,
- <&cpg R9A07G044_USB_U2H0_HRESETN>;
- phys = <&usb2_phy0 1>;
- phy-names = "usb";
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- ohci1: usb at 11c70000 {
- compatible = "generic-ohci";
- reg = <0 0x11c70000 0 0x100>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
- resets = <&phyrst 1>,
- <&cpg R9A07G044_USB_U2H1_HRESETN>;
- phys = <&usb2_phy1 1>;
- phy-names = "usb";
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- ehci0: usb at 11c50100 {
- compatible = "generic-ehci";
- reg = <0 0x11c50100 0 0x100>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
- resets = <&phyrst 0>,
- <&cpg R9A07G044_USB_U2H0_HRESETN>;
- phys = <&usb2_phy0 2>;
- phy-names = "usb";
- companion = <&ohci0>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- ehci1: usb at 11c70100 {
- compatible = "generic-ehci";
- reg = <0 0x11c70100 0 0x100>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
- resets = <&phyrst 1>,
- <&cpg R9A07G044_USB_U2H1_HRESETN>;
- phys = <&usb2_phy1 2>;
- phy-names = "usb";
- companion = <&ohci1>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- usb2_phy0: usb-phy at 11c50200 {
- compatible = "renesas,usb2-phy-r9a07g044",
- "renesas,rzg2l-usb2-phy";
- reg = <0 0x11c50200 0 0x700>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
- resets = <&phyrst 0>;
- #phy-cells = <1>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- usb2_phy1: usb-phy at 11c70200 {
- compatible = "renesas,usb2-phy-r9a07g044",
- "renesas,rzg2l-usb2-phy";
- reg = <0 0x11c70200 0 0x700>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
- resets = <&phyrst 1>;
- #phy-cells = <1>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- hsusb: usb at 11c60000 {
- compatible = "renesas,usbhs-r9a07g044",
- "renesas,rza2-usbhs";
- reg = <0 0x11c60000 0 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
- <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>;
- resets = <&phyrst 0>,
- <&cpg R9A07G044_USB_U2P_EXL_SYSRST>;
- renesas,buswait = <7>;
- phys = <&usb2_phy0 3>;
- phy-names = "usb";
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- wdt0: watchdog at 12800800 {
- compatible = "renesas,r9a07g044-wdt",
- "renesas,rzg2l-wdt";
- reg = <0 0x12800800 0 0x400>;
- clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>,
- <&cpg CPG_MOD R9A07G044_WDT0_CLK>;
- clock-names = "pclk", "oscclk";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "wdt", "perrout";
- resets = <&cpg R9A07G044_WDT0_PRESETN>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- wdt1: watchdog at 12800c00 {
- compatible = "renesas,r9a07g044-wdt",
- "renesas,rzg2l-wdt";
- reg = <0 0x12800C00 0 0x400>;
- clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>,
- <&cpg CPG_MOD R9A07G044_WDT1_CLK>;
- clock-names = "pclk", "oscclk";
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "wdt", "perrout";
- resets = <&cpg R9A07G044_WDT1_PRESETN>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- ostm0: timer at 12801000 {
- compatible = "renesas,r9a07g044-ostm",
- "renesas,ostm";
- reg = <0x0 0x12801000 0x0 0x400>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
- clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
- resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- ostm1: timer at 12801400 {
- compatible = "renesas,r9a07g044-ostm",
- "renesas,ostm";
- reg = <0x0 0x12801400 0x0 0x400>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
- clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
- resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
- power-domains = <&cpg>;
- status = "disabled";
- };
-
- ostm2: timer at 12801800 {
- compatible = "renesas,r9a07g044-ostm",
- "renesas,ostm";
- reg = <0x0 0x12801800 0x0 0x400>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
- clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
- resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
- power-domains = <&cpg>;
- status = "disabled";
- };
- };
-
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&tsu 0>;
- sustainable-power = <717>;
-
- cooling-maps {
- map0 {
- trip = <&target>;
- cooling-device = <&cpu0 0 2>;
- contribution = <1024>;
- };
- };
-
- trips {
- sensor_crit: sensor-crit {
- temperature = <125000>;
- hysteresis = <1000>;
- type = "critical";
- };
-
- target: trip-point {
- temperature = <100000>;
- hysteresis = <1000>;
- type = "passive";
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-};
diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts
deleted file mode 100644
index 568d49cfe44a..000000000000
--- a/arch/arm/dts/r9a07g044l2-smarc.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/G2L SMARC EVK board
- *
- * Copyright (C) 2021 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-
-/* Enable SCIF2 (SER0) on PMOD1 (CN7) */
-#define PMOD1_SER0 1
-
-/*
- * To enable MTU3a PWM on PMOD0,
- * Disable PMOD1_SER0 by setting "#define PMOD1_SER0 0" above and
- * enable PMOD_MTU3 by setting "#define PMOD_MTU3 1" below.
- */
-#define PMOD_MTU3 0
-
-#if (PMOD_MTU3 && PMOD1_SER0)
-#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive "
-#endif
-
-#define MTU3_COUNTER_Z_PHASE_SIGNAL 0
-
-#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL)
-#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
-#endif
-
-#include "r9a07g044l2.dtsi"
-#include "rzg2l-smarc-som.dtsi"
-#include "rzg2l-smarc-pinfunction.dtsi"
-#include "rz-smarc-common.dtsi"
-#include "rzg2l-smarc.dtsi"
-
-/ {
- model = "Renesas SMARC EVK based on r9a07g044l2";
- compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
-};
diff --git a/arch/arm/dts/r9a07g044l2.dtsi b/arch/arm/dts/r9a07g044l2.dtsi
deleted file mode 100644
index 91dc10b2cdbb..000000000000
--- a/arch/arm/dts/r9a07g044l2.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts
- *
- * Copyright (C) 2021 Renesas Electronics Corp.
- */
-
-/dts-v1/;
-#include "r9a07g044.dtsi"
-
-/ {
- compatible = "renesas,r9a07g044l2", "renesas,r9a07g044";
-};
diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi
deleted file mode 100644
index b7a3e6caa386..000000000000
--- a/arch/arm/dts/rz-smarc-common.dtsi
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
- *
- * Copyright (C) 2022 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-
-/*
- * SSI-WM8978
- *
- * This command is required when Playback/Capture
- *
- * amixer cset name='Left Input Mixer L2 Switch' on
- * amixer cset name='Right Input Mixer R2 Switch' on
- * amixer cset name='Headphone Playback Volume' 100
- * amixer cset name='PCM Volume' 100%
- * amixer cset name='Input PGA Volume' 25
- *
- */
-
-/ {
- aliases {
- serial0 = &scif0;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- snd_rzg2l: sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&cpu_dai>;
- simple-audio-card,frame-master = <&cpu_dai>;
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,widgets = "Microphone", "Microphone Jack";
- simple-audio-card,routing =
- "L2", "Mic Bias",
- "R2", "Mic Bias",
- "Mic Bias", "Microphone Jack";
-
- cpu_dai: simple-audio-card,cpu {
- };
-
- codec_dai: simple-audio-card,codec {
- clocks = <&versa3 2>;
- sound-dai = <&wm8978>;
- };
- };
-
- usb0_vbus_otg: regulator-usb0-vbus-otg {
- compatible = "regulator-fixed";
-
- regulator-name = "USB0_VBUS_OTG";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vccq_sdhi1: regulator-vccq-sdhi1 {
- compatible = "regulator-gpio";
- regulator-name = "SDHI1 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- gpios-states = <1>;
- states = <3300000 1>, <1800000 0>;
- };
-
- x1: x1-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
-};
-
-&audio_clk1 {
- clock-frequency = <11289600>;
-};
-
-&audio_clk2 {
- clock-frequency = <12288000>;
-};
-
-&canfd {
- pinctrl-0 = <&can0_pins &can1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- channel0 {
- status = "okay";
- };
-
- channel1 {
- status = "okay";
- };
-};
-
-&ehci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&hsusb {
- dr_mode = "otg";
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&ohci0 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&phyrst {
- status = "okay";
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&sdhi1 {
- pinctrl-0 = <&sdhi1_pins>;
- pinctrl-1 = <&sdhi1_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <&vccq_sdhi1>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-0 = <&spi1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&usb2_phy0 {
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
- vbus-supply = <&usb0_vbus_otg>;
- status = "okay";
-};
-
-&usb2_phy1 {
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi
deleted file mode 100644
index 18c526c7a4cf..000000000000
--- a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
- *
- * Copyright (C) 2021 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-
-&pinctrl {
- pinctrl-0 = <&sound_clk_pins>;
- pinctrl-names = "default";
-
- can0_pins: can0 {
- pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
- <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
- };
-
- /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
- can0-stb-hog {
- gpio-hog;
- gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "can0_stb";
- };
-
- can1_pins: can1 {
- pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
- <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
- };
-
- /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
- can1-stb-hog {
- gpio-hog;
- gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "can1_stb";
- };
-
- i2c0_pins: i2c0 {
- pins = "RIIC0_SDA", "RIIC0_SCL";
- input-enable;
- };
-
- i2c1_pins: i2c1 {
- pins = "RIIC1_SDA", "RIIC1_SCL";
- input-enable;
- };
-
- i2c3_pins: i2c3 {
- pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
- <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
- };
-
- mtu3_pins: mtu3 {
- mtu3-ext-clk-input-pin {
- pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */
- <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */
- };
-
- mtu3-pwm {
- pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
- <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
- <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
- <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
- };
-
-#if MTU3_COUNTER_Z_PHASE_SIGNAL
- mtu3-zphase-clk {
- pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */
- };
-#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
- };
-
- scif0_pins: scif0 {
- pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
- <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
- };
-
- scif2_pins: scif2 {
- pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
- <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
- <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
- <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
- };
-
- sd1-pwr-en-hog {
- gpio-hog;
- gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "sd1_pwr_en";
- };
-
- sdhi1_pins: sd1 {
- sd1_data {
- pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
- power-source = <3300>;
- };
-
- sd1_ctrl {
- pins = "SD1_CLK", "SD1_CMD";
- power-source = <3300>;
- };
-
- sd1_mux {
- pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
- };
- };
-
- sdhi1_pins_uhs: sd1_uhs {
- sd1_data_uhs {
- pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
- power-source = <1800>;
- };
-
- sd1_ctrl_uhs {
- pins = "SD1_CLK", "SD1_CMD";
- power-source = <1800>;
- };
-
- sd1_mux_uhs {
- pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
- };
- };
-
- sound_clk_pins: sound_clk {
- pins = "AUDIO_CLK1", "AUDIO_CLK2";
- input-enable;
- };
-
- spi1_pins: spi1 {
- pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
- <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
- <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
- <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
- };
-
- ssi0_pins: ssi0 {
- pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
- <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
- <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
- <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
- };
-
- usb0_pins: usb0 {
- pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
- <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
- <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
- };
-
- usb1_pins: usb1 {
- pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
- <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
- };
-};
-
diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi
deleted file mode 100644
index 547859c388ce..000000000000
--- a/arch/arm/dts/rzg2l-smarc-som.dtsi
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
- *
- * Copyright (C) 2021 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
-#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-
-/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */
-#define EMMC 1
-
-/*
- * To enable uSD card on CN3,
- * SW1[2] should be at position 3/ON.
- * Disable eMMC by setting "#define EMMC 0" above.
- */
-#define SDHI (!EMMC)
-
-/ {
- aliases {
- ethernet0 = ð0;
- ethernet1 = ð1;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- };
-
- memory at 48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x78000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_1p1v: regulator-vdd-core {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vccq_sdhi0: regulator-vccq-sdhi0 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- states = <3300000 1>, <1800000 0>;
- regulator-boot-on;
- gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
- regulator-always-on;
- };
-
- /* 32.768kHz crystal */
- x2: x2-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-};
-
-&adc {
- pinctrl-0 = <&adc_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- /delete-node/ channel at 6;
- /delete-node/ channel at 7;
-};
-
-ð0 {
- pinctrl-0 = <ð0_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- status = "okay";
-
- phy0: ethernet-phy at 7 {
- compatible = "ethernet-phy-id0022.1640",
- "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- interrupt-parent = <&irqc>;
- interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
- rxc-skew-psec = <2400>;
- txc-skew-psec = <2400>;
- rxdv-skew-psec = <0>;
- txen-skew-psec = <0>;
- rxd0-skew-psec = <0>;
- rxd1-skew-psec = <0>;
- rxd2-skew-psec = <0>;
- rxd3-skew-psec = <0>;
- txd0-skew-psec = <0>;
- txd1-skew-psec = <0>;
- txd2-skew-psec = <0>;
- txd3-skew-psec = <0>;
- };
-};
-
-ð1 {
- pinctrl-0 = <ð1_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy1>;
- phy-mode = "rgmii-id";
- status = "okay";
-
- phy1: ethernet-phy at 7 {
- compatible = "ethernet-phy-id0022.1640",
- "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- interrupt-parent = <&irqc>;
- interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
- rxc-skew-psec = <2400>;
- txc-skew-psec = <2400>;
- rxdv-skew-psec = <0>;
- txen-skew-psec = <0>;
- rxd0-skew-psec = <0>;
- rxd1-skew-psec = <0>;
- rxd2-skew-psec = <0>;
- rxd3-skew-psec = <0>;
- txd0-skew-psec = <0>;
- txd1-skew-psec = <0>;
- txd2-skew-psec = <0>;
- txd3-skew-psec = <0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <24000000>;
-};
-
-&gpu {
- mali-supply = <®_1p1v>;
-};
-
-&i2c3 {
- raa215300: pmic at 12 {
- compatible = "renesas,raa215300";
- reg = <0x12>, <0x6f>;
- reg-names = "main", "rtc";
-
- clocks = <&x2>;
- clock-names = "xin";
- };
-};
-
-&ostm1 {
- status = "okay";
-};
-
-&ostm2 {
- status = "okay";
-};
-
-&pinctrl {
- adc_pins: adc {
- pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
- };
-
- eth0_pins: eth0 {
- pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
- <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
- <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
- <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
- <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
- <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
- <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
- <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
- <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
- <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
- <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
- <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
- <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
- <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
- <RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */
- };
-
- eth1_pins: eth1 {
- pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
- <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
- <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
- <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
- <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
- <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
- <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
- <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
- <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
- <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
- <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
- <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
- <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
- <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
- <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
- <RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */
- };
-
- gpio-sd0-pwr-en-hog {
- gpio-hog;
- gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "gpio_sd0_pwr_en";
- };
-
- qspi0_pins: qspi0 {
- qspi0-data {
- pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
- power-source = <1800>;
- };
-
- qspi0-ctrl {
- pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
- power-source = <1800>;
- };
- };
-
- /*
- * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
- * The below switch logic can be used to select the device between
- * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
- * SW1[2] should be at position 2/OFF to enable 64 GB eMMC
- * SW1[2] should be at position 3/ON to enable uSD card CN3
- */
- sd0-dev-sel-hog {
- gpio-hog;
- gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "sd0_dev_sel";
- };
-
- sdhi0_emmc_pins: sd0emmc {
- sd0_emmc_data {
- pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
- "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
- power-source = <1800>;
- };
-
- sd0_emmc_ctrl {
- pins = "SD0_CLK", "SD0_CMD";
- power-source = <1800>;
- };
-
- sd0_emmc_rst {
- pins = "SD0_RST#";
- power-source = <1800>;
- };
- };
-
- sdhi0_pins: sd0 {
- sd0_data {
- pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
- power-source = <3300>;
- };
-
- sd0_ctrl {
- pins = "SD0_CLK", "SD0_CMD";
- power-source = <3300>;
- };
-
- sd0_mux {
- pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
- };
- };
-
- sdhi0_pins_uhs: sd0_uhs {
- sd0_data_uhs {
- pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
- power-source = <1800>;
- };
-
- sd0_ctrl_uhs {
- pins = "SD0_CLK", "SD0_CMD";
- power-source = <1800>;
- };
-
- sd0_mux_uhs {
- pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
- };
- };
-};
-
-&sbc {
- pinctrl-0 = <&qspi0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash at 0 {
- compatible = "micron,mt25qu512a", "jedec,spi-nor";
- reg = <0>;
- m25p,fast-read;
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <4>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boot at 0 {
- reg = <0x00000000 0x2000000>;
- read-only;
- };
- user at 2000000 {
- reg = <0x2000000 0x2000000>;
- };
- };
- };
-};
-
-#if SDHI
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-1 = <&sdhi0_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <&vccq_sdhi0>;
- bus-width = <4>;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- status = "okay";
-};
-#endif
-
-#if EMMC
-&sdhi0 {
- pinctrl-0 = <&sdhi0_emmc_pins>;
- pinctrl-1 = <&sdhi0_emmc_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- fixed-emmc-driver-type = <1>;
- status = "okay";
-};
-#endif
-
-&wdt0 {
- status = "okay";
- timeout-sec = <60>;
-};
-
-&wdt1 {
- status = "okay";
- timeout-sec = <60>;
-};
diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi
deleted file mode 100644
index 37807f1bda4d..000000000000
--- a/arch/arm/dts/rzg2l-smarc.dtsi
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts
- *
- * Copyright (C) 2021 Renesas Electronics Corp.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
-
-/ {
- aliases {
- serial1 = &scif2;
- i2c3 = &i2c3;
- };
-
- osc1: cec-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <12000000>;
- };
-
- hdmi-out {
- compatible = "hdmi-connector";
- type = "d";
-
- port {
- hdmi_con_out: endpoint {
- remote-endpoint = <&adv7535_out>;
- };
- };
- };
-};
-
-&cpu_dai {
- sound-dai = <&ssi0>;
-};
-
-&dsi {
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- dsi0_in: endpoint {
- };
- };
-
- port at 1 {
- reg = <1>;
- dsi0_out: endpoint {
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&adv7535_in>;
- };
- };
- };
-};
-
-&i2c1 {
- adv7535: hdmi at 3d {
- compatible = "adi,adv7535";
- reg = <0x3d>;
-
- interrupt-parent = <&pinctrl>;
- interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>;
- clocks = <&osc1>;
- clock-names = "cec";
- avdd-supply = <®_1p8v>;
- dvdd-supply = <®_1p8v>;
- pvdd-supply = <®_1p8v>;
- a2vdd-supply = <®_1p8v>;
- v3p3-supply = <®_3p3v>;
- v1p2-supply = <®_1p8v>;
-
- adi,dsi-lanes = <4>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- adv7535_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
-
- port at 1 {
- reg = <1>;
- adv7535_out: endpoint {
- remote-endpoint = <&hdmi_con_out>;
- };
- };
- };
- };
-};
-
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
- clock-frequency = <400000>;
-
- status = "okay";
-
- wm8978: codec at 1a {
- compatible = "wlf,wm8978";
- #sound-dai-cells = <0>;
- reg = <0x1a>;
- };
-
- versa3: clock-generator at 68 {
- compatible = "renesas,5p35023";
- reg = <0x68>;
- #clock-cells = <1>;
- clocks = <&x1>;
-
- renesas,settings = [
- 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
- 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
- 80 b0 45 c4 95
- ];
-
- assigned-clocks = <&versa3 0>, <&versa3 1>,
- <&versa3 2>, <&versa3 3>,
- <&versa3 4>, <&versa3 5>;
- assigned-clock-rates = <24000000>, <11289600>,
- <11289600>, <12000000>,
- <25000000>, <12288000>;
- };
-};
-
-#if PMOD_MTU3
-&mtu3 {
- pinctrl-0 = <&mtu3_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-#if MTU3_COUNTER_Z_PHASE_SIGNAL
-/* SDHI cd pin is muxed with counter Z phase signal */
-&sdhi1 {
- status = "disabled";
-};
-#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
-
-&spi1 {
- status = "disabled";
-};
-#endif /* PMOD_MTU3 */
-
-/*
- * To enable SCIF2 (SER0) on PMOD1 (CN7)
- * SW1 should be at position 2->3 so that SER0_CTS# line is activated
- * SW2 should be at position 2->3 so that SER0_TX line is activated
- * SW3 should be at position 2->3 so that SER0_RX line is activated
- * SW4 should be at position 2->3 so that SER0_RTS# line is activated
- */
-#if PMOD1_SER0
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
- pinctrl-names = "default";
-
- uart-has-rtscts;
- status = "okay";
-};
-#endif
-
-&ssi0 {
- pinctrl-0 = <&ssi0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&vccq_sdhi1 {
- gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
-};
--
2.43.0
More information about the U-Boot
mailing list