[PATCH v4 2/2] board: rockchip: Add support for rk3588 GenBook
Kever Yang
kever.yang at rock-chips.com
Thu Oct 31 09:21:42 CET 2024
On 2024/10/30 20:09, Andy Yan wrote:
> Add support for Cool Pi GenBook, it works as a carrier board
> connect with CM5 SOM.
>
> Specification:
> - Rockchip RK3588
> - LPDDR5X 8/32 GB
> - eMMC 64 GB
> - HDMI Type A out x 1
> - USB 3.0 Host x 1
> - USB-C 3.0 with DisplayPort AltMode
> - PCIE M.2 E Key for RTL8852BE Wireless connection
> - PCIE M.2 M Key for NVME connection
> - eDP panel with 1920x1080
>
> Tested by Armbian boot on USB disk.
>
> Signed-off-by: Andy Yan <andyshrk at 163.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
>
> ---
>
> Changes in v4:
> - Fix a underline too short error in rst doc
>
> Changes in v3:
> - Remove upstreamed dt in genbook-u-boot.dtsi
> - Remove MMC releated config as there is no SD-card on this machine
> - Enable LED config
> - Enable rk8xx pmic
> - rename defconfig to coolpi-cm5-genbook-rk3588_defconfig
> - redefine BOOT_TARGETS
>
> Changes in v2:
> - split the dts to a separate commit
> - rename to genbook_cm5_rk3588
> - move readme to doc/board, and write as reStructuredText format
> - alphabetically reorder
> - update doc/board/rockchip
>
> .../dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi | 20 ++++
> arch/arm/mach-rockchip/rk3588/Kconfig | 19 ++++
> board/coolpi/genbook_cm5_rk3588/Kconfig | 12 +++
> board/coolpi/genbook_cm5_rk3588/MAINTAINERS | 7 ++
> configs/coolpi-cm5-genbook-rk3588_defconfig | 101 ++++++++++++++++++
> doc/board/coolpi/genbook_cm5_rk3588.rst | 68 ++++++++++++
> doc/board/coolpi/index.rst | 9 ++
> doc/board/rockchip/rockchip.rst | 1 +
> include/configs/genbook-cm5-rk3588.h | 31 ++++++
> 9 files changed, 268 insertions(+)
> create mode 100644 arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
> create mode 100644 board/coolpi/genbook_cm5_rk3588/Kconfig
> create mode 100644 board/coolpi/genbook_cm5_rk3588/MAINTAINERS
> create mode 100644 configs/coolpi-cm5-genbook-rk3588_defconfig
> create mode 100644 doc/board/coolpi/genbook_cm5_rk3588.rst
> create mode 100644 doc/board/coolpi/index.rst
> create mode 100644 include/configs/genbook-cm5-rk3588.h
>
> diff --git a/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi b/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
> new file mode 100644
> index 00000000000..5a3073d6e7f
> --- /dev/null
> +++ b/arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +#include "rk3588-u-boot.dtsi"
> +
> +&fspim2_pins {
> + bootph-pre-ram;
> + bootph-some-ram;
> +};
> +
> +&sfc {
> + flash at 0 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + };
> +};
> +
> +/* USB A out */
> +&usb_host1_xhci {
> + snps,dis_u3_susphy_quirk;
> +};
> diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig
> index a76a470cc98..c53f6bb926e 100644
> --- a/arch/arm/mach-rockchip/rk3588/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3588/Kconfig
> @@ -29,6 +29,24 @@ config TARGET_CM3588_NAS_RK3588
> - 3.5mm Headphone out, 2.0mm PH-2A Mic in
> - 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
>
> +config TARGET_GENBOOK_CM5_RK3588
> + bool "Cool Pi CM5 GenBook"
> + select BOARD_LATE_INIT
> + help
> + GeenBook is a notebook based on Rockchip RK3588, and works as a carrier
> + board connect with CM5 SOM.
> +
> + Specification:
> + - Rockchip RK3588
> + - LPDDR5X 8/32 GB
> + - eMMC 64 GB
> + - HDMI Type A out x 1
> + - USB 3.0 Host x 1
> + - USB-C 3.0 with DisplayPort AltMode
> + - PCIE M.2 E Key for RTL8852BE Wireless connection
> + - PCIE M.2 M Key for NVME connection
> + - eDP panel with 1920x1080
> +
> config TARGET_JAGUAR_RK3588
> bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)"
> select BOARD_LATE_INIT
> @@ -361,6 +379,7 @@ config TEXT_BASE
> default 0x00a00000
>
> source "board/armsom/sige7-rk3588/Kconfig"
> +source "board/coolpi/genbook_cm5_rk3588/Kconfig"
> source "board/edgeble/neural-compute-module-6/Kconfig"
> source "board/friendlyelec/cm3588-nas-rk3588/Kconfig"
> source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
> diff --git a/board/coolpi/genbook_cm5_rk3588/Kconfig b/board/coolpi/genbook_cm5_rk3588/Kconfig
> new file mode 100644
> index 00000000000..67086ea6297
> --- /dev/null
> +++ b/board/coolpi/genbook_cm5_rk3588/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_GENBOOK_CM5_RK3588
> +
> +config SYS_BOARD
> + default "genbook_cm5_rk3588"
> +
> +config SYS_VENDOR
> + default "coolpi"
> +
> +config SYS_CONFIG_NAME
> + default "genbook-cm5-rk3588"
> +
> +endif
> diff --git a/board/coolpi/genbook_cm5_rk3588/MAINTAINERS b/board/coolpi/genbook_cm5_rk3588/MAINTAINERS
> new file mode 100644
> index 00000000000..0496cc93b59
> --- /dev/null
> +++ b/board/coolpi/genbook_cm5_rk3588/MAINTAINERS
> @@ -0,0 +1,7 @@
> +GENBOOK-CM5-RK3588
> +M: Andy Yan <andyshrk at 163.com>
> +S: Maintained
> +F: board/coolpi/genbook-cm5-rk3588
> +F: include/configs/genbook-cm5-rk3588.h
> +F: configs/coolpi-cm5-genbook-rk3588_defconfig
> +F: arch/arm/dts/rk3588-coolpi-cm5-genbook-u-boot.dtsi
> diff --git a/configs/coolpi-cm5-genbook-rk3588_defconfig b/configs/coolpi-cm5-genbook-rk3588_defconfig
> new file mode 100644
> index 00000000000..3eb5dc968af
> --- /dev/null
> +++ b/configs/coolpi-cm5-genbook-rk3588_defconfig
> @@ -0,0 +1,101 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_COUNTER_FREQUENCY=24000000
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SF_DEFAULT_SPEED=24000000
> +CONFIG_SF_DEFAULT_MODE=0x2000
> +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-coolpi-cm5-genbook"
> +CONFIG_ROCKCHIP_RK3588=y
> +CONFIG_ROCKCHIP_SPI_IMAGE=y
> +CONFIG_SPL_SERIAL=y
> +CONFIG_TARGET_GENBOOK_CM5_RK3588=y
> +CONFIG_SYS_LOAD_ADDR=0xc00800
> +CONFIG_SF_DEFAULT_BUS=5
> +CONFIG_DEBUG_UART_BASE=0xFEB50000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_SPI_FLASH_SUPPORT=y
> +CONFIG_SPL_SPI=y
> +CONFIG_PCI=y
> +CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_LEGACY_IMAGE_FORMAT=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-coolpi-cm5-genbook.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_MAX_SIZE=0x40000
> +CONFIG_SPL_PAD_TO=0x7f8000
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_SPI_LOAD=y
> +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
> +CONFIG_SPL_ATF=y
> +# CONFIG_CMD_BIND is not set
> +# CONFIG_CMD_FASTBOOT is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_LIVE=y
> +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_AHCI_PCI=y
> +CONFIG_DWC_AHCI=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_MISC=y
> +CONFIG_SUPPORT_EMMC_RPMB=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_SPL_MMC_HS400_SUPPORT=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_SDMA=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
> +CONFIG_SPI_FLASH_XMC=y
> +CONFIG_SPI_FLASH_XTX=y
> +CONFIG_NVME_PCI=y
> +CONFIG_PCIE_DW_ROCKCHIP=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
> +CONFIG_PHY_ROCKCHIP_USBDP=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_SPL_RAM=y
> +CONFIG_SCSI=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550_MEM32=y
> +CONFIG_ROCKCHIP_SFC=y
> +CONFIG_ROCKCHIP_SPI=y
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_ERRNO_STR=y
> diff --git a/doc/board/coolpi/genbook_cm5_rk3588.rst b/doc/board/coolpi/genbook_cm5_rk3588.rst
> new file mode 100644
> index 00000000000..a02e561051a
> --- /dev/null
> +++ b/doc/board/coolpi/genbook_cm5_rk3588.rst
> @@ -0,0 +1,68 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +GenBook
> +=======
> +Cool Pi GenBook is a laptop powered by RK3588, it works with a
> +carrier board connect with CM5.
> +
> +Specification:
> +* Rockchip RK3588
> +* LPDDR5X 8/32 GB
> +* eMMC 64 GB
> +* SPI Nor 8 MB
> +* HDMI Type A out x 1
> +* USB 3.0 Host x 1
> +* USB-C 3.0 with DisplayPort AltMode
> +* PCIE M.2 E Key for RTL8852BE Wireless connection
> +* PCIE M.2 M Key for NVME connection
> +* eDP panel with 1920x1080
> +
> +Here is the step-by-step to compile and boot to U-Boot on GenBook.
> +
> +Get the TF-A and DDR init (TPL) binaries
> +----------------------------------------
> +
> +.. prompt:: bash
> +
> + > cd u-boot
> + > export ROCKCHIP_TPL=../rkbin/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.17.bin
> + > export BL31=../rkbin/bin/rk35/rk3588_bl31_v1.46.elf
> + > make coolpi-genbook-cm5-rk3588_defconfig
> + > make CROSS_COMPILE=aarch64-linux-gnu-
> +
> +This will build ``u-boot-rockchip.bin`` for eMMC and ``u-boot-rockchip-spi.bin`` for SPI Nor.
> +
> +Write u-boot to eMMC or SPI Nor from a Linux system on the laptop
> +-----------------------------------------------------------------
> +
> +Copy ``u-boot-rockchip.bin`` and ``u-boot-rockchip-spi.bin`` to the laptop.
> +
> +eMMC
> +~~~~
> +
> +.. prompt:: bash
> +
> + dd if=u-boot-rockchip.bin of=/dev/mmcblk0 bs=512 seek=64
> +
> +SPI Nor
> +~~~~~~~
> +
> +.. prompt:: bash
> +
> + dd if=u-boot-rockchip-spi.bin of=/dev/mtdblock0
> +
> +``upgrade_tool`` allows to flash the on-board SPI Nor via the USB TypeC interface
> +with help of the Rockchip loader binary.
> +
> +To enter the USB flashing mode, connect the laptop and your HOST PC with a USB-C
> +cable, reset the laptop with ``Loader Key`` pressed.
> +On your PC, check with ``lsusb -d 2207:350b``).
> +
> +To flash U-Boot on the SPI Nor with ``upgrade_tool``:
> +
> +.. prompt:: bash
> +
> + upgrade_tool db rk3588/MiniLoaderAll.bin
> + upgrade_tool ssd // Input 5 for SPINOR download mode
> + upgrade_tool wl 0 u-boot-rockchip-spi.bin
> + upgrade_tool rd
> diff --git a/doc/board/coolpi/index.rst b/doc/board/coolpi/index.rst
> new file mode 100644
> index 00000000000..9c9593fd6aa
> --- /dev/null
> +++ b/doc/board/coolpi/index.rst
> @@ -0,0 +1,9 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Cool Pi
> +=================
> +
> +.. toctree::
> + :maxdepth: 2
> +
> + genbook_cm5_rk3588
> diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
> index 86d83befb5b..2d6593cba75 100644
> --- a/doc/board/rockchip/rockchip.rst
> +++ b/doc/board/rockchip/rockchip.rst
> @@ -145,6 +145,7 @@ List of mainline supported Rockchip boards:
> - Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588)
> - Yanyi Tech CoolPi 4 Model B (coolpi-4b-rk3588s)
> - Yanyi Tech CoolPi CM5 EVB (coolpi-cm5-evb-rk3588)
> + - Yanyi Tech CoolPi CM5 GenBook (coolpi-cm5-genbook-rk3588)
>
> * rv1108
> - Rockchip Evb-rv1108 (evb-rv1108)
> diff --git a/include/configs/genbook-cm5-rk3588.h b/include/configs/genbook-cm5-rk3588.h
> new file mode 100644
> index 00000000000..f71f735b113
> --- /dev/null
> +++ b/include/configs/genbook-cm5-rk3588.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + */
> +
> +#ifndef __GENBOOK_CM5_RK3588_H
> +#define __GENBOOK_CM5_RK3588_H
> +
> +#define ROCKCHIP_DEVICE_SETTINGS \
> + "stdout=serial,vidconsole\0" \
> + "stderr=serial,vidconsole\0"
> +
> +#include <configs/rk3588_common.h>
> +
> +#undef BOOT_TARGETS
> +#define BOOT_TARGETS "usb mmc0"
> +
> +#undef CFG_EXTRA_ENV_SETTINGS
> +
> +/*
> + * As a laptop, there is no sdmmc, and we want to
> + * set usb the highest boot priority for third-part
> + * os installation.
> + */
> +#define CFG_EXTRA_ENV_SETTINGS \
> + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
> + "partitions=" PARTS_DEFAULT \
> + ENV_MEM_LAYOUT_SETTINGS \
> + ROCKCHIP_DEVICE_SETTINGS \
> + "boot_targets=" BOOT_TARGETS "\0"
> +
> +#endif /* __GENBOOK_CM5_RK3588_H */
More information about the U-Boot
mailing list