[PATCH 1/3] configs: rockchip: enable RK806 SPI PMIC for Radxa ROCK 5A

[Quentin Schulz]

Hi Naoki,

On 10/31/24 4:22 AM, FUKAUMI Naoki wrote:
> enable RK806 SPI PMIC driver and related cmd/configs for Radxa ROCK 5A.
> 
> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
> ---
>   configs/rock5a-rk3588s_defconfig | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig
> index 9618d590009..d2770198ef2 100644
> --- a/configs/rock5a-rk3588s_defconfig
> +++ b/configs/rock5a-rk3588s_defconfig
> @@ -28,6 +28,7 @@ CONFIG_CMD_I2C=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_USB=y
>   # CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_PMIC=y
>   CONFIG_CMD_REGULATOR=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   CONFIG_SPL_OF_CONTROL=y
> @@ -55,11 +56,16 @@ CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>   CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
>   CONFIG_PHY_ROCKCHIP_USBDP=y
>   CONFIG_SPL_PINCTRL=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_SPL_PMIC_RK8XX=y

This won't be useful as neither the SPI controller, SPI pinmux nor PMIC 
nodes are marked as to keep for SPL in the DT as far as I could tell.

Same remark for patch 3 in this series.

Cheers,
Quentin