[PATCH v3 00/16] Miscellaneous fixes
Jerome Forissier
jerome.forissier at linaro.org
Tue Sep 3 10:37:57 CEST 2024
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
Changes in v3:
- Apply R-b tags from Peter R.
- Rework "buildman/toolchain.py: set CROSS_COMPILE only if self.cross
is set". Subject changed to "buildman/toolchain.py: do not set
CROSS_COMPILE for sandbox", GetEnvArgs function fixed as well, and
test cases added. (Simon G.)
Changes in v2:
- Rebased onto master
- "flash: prefix error codes with FL_"
Update drivers/mtd/altera_qspi.c too. This was mentioned by Simon G.
in my lwIP v9 thread [1]. Tom R./Ilias A./Peter R.: I kept your R-b
tags, please shout if it's not OK.
- "net: fm: call dtsec_init_phy() only when it is defined"
Address Simon G.'s comments: update condition (parentheses,
CONFIG_BITBANGMII, if instead of #if).
Peter R: I dropped your R-b since the code changed significantly.
- New patches:
"common: update: UPDATE_COMMON implies CMD_TFTPBOOT"
"cmd: pxe: CMD_PXE implies CMD_TFTPBOOT"
"buildman/toolchain.py: set CROSS_COMPILE only if self.cross is set"
[1] https://lists.denx.de/pipermail/u-boot/2024-August/563497.html
Jerome Forissier (16):
Makefile: detect HOST_ARCH properly when CROSS_COMPILE is multi-word
buildman/toolchain.py: do not set CROSS_COMPILE for sandbox
flash: prefix error codes with FL_
at91: rename mem_init() to at91_mem_init()
arm: omap2: add missing #include <netdev.h>
net: fm: call dtsec_init_phy() only when it is defined
net: wget: removed unused function wget_success()
net: phy: ncsi: depend on NET
net: ftgmac100: depend on NET
net: wget: allow EFI boot
net: fec_mxc_init(): do not ignore return status of fec_open()
test/py: net_boot: fix comment
test/py: test_efi_loader: add missing dependency on cmd_tftpboot
test/py: test_efi_loader: add HTTP (wget) test for the EFI loader
common: update: UPDATE_COMMON implies CMD_TFTPBOOT
cmd: pxe: CMD_PXE implies CMD_TFTPBOOT
Makefile | 2 +-
arch/arm/mach-at91/include/mach/at91_common.h | 2 +-
arch/arm/mach-at91/spl_at91.c | 2 +-
arch/arm/mach-at91/spl_atmel.c | 2 +-
arch/arm/mach-omap2/omap3/emac.c | 1 +
.../atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +-
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +-
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +-
.../atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 2 +-
.../sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 2 +-
board/atmel/sama5d2_icp/sama5d2_icp.c | 2 +-
.../atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +-
.../atmel/sama5d3_xplained/sama5d3_xplained.c | 2 +-
board/atmel/sama5d3xek/sama5d3xek.c | 2 +-
.../atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +-
board/atmel/sama5d4ek/sama5d4ek.c | 2 +-
board/cobra5272/flash.c | 26 ++++----
.../conclusive/kstr-sama5d27/kstr-sama5d27.c | 2 +-
board/freescale/m5253demo/flash.c | 6 +-
board/gardena/smart-gateway-at91sam/spl.c | 2 +-
board/siemens/corvus/board.c | 2 +-
board/siemens/smartweb/smartweb.c | 2 +-
board/siemens/taurus/taurus.c | 2 +-
cmd/Kconfig | 1 +
common/Kconfig | 1 +
common/flash.c | 44 ++++++-------
drivers/mtd/altera_qspi.c | 4 +-
drivers/mtd/cfi_flash.c | 36 +++++------
drivers/net/Kconfig | 1 +
drivers/net/fec_mxc.c | 3 +-
drivers/net/fm/eth.c | 10 ++-
drivers/net/phy/Kconfig | 1 +
include/flash.h | 20 +++---
net/wget.c | 11 ++--
test/py/tests/test_efi_loader.py | 62 ++++++++++++++-----
test/py/tests/test_net_boot.py | 2 +-
tools/buildman/test.py | 46 ++++++++++++++
tools/buildman/toolchain.py | 6 +-
38 files changed, 203 insertions(+), 118 deletions(-)
--
2.40.1
More information about the U-Boot
mailing list