[PATCH v1 2/3] configs: arbel_evb: change env offset and boot address
Jim Liu
jim.t90615 at gmail.com
Wed Sep 4 04:41:05 CEST 2024
Change env offset and boot address for new design.
Signed-off-by: Jim Liu <JJLIU0 at nuvoton.com>
---
configs/arbel_evb_defconfig | 4 ++--
include/configs/arbel.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/configs/arbel_evb_defconfig b/configs/arbel_evb_defconfig
index 08753aebc0..9983d3a58b 100644
--- a/configs/arbel_evb_defconfig
+++ b/configs/arbel_evb_defconfig
@@ -7,7 +7,7 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x06208000
CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_OFFSET=0x3C0000
+CONFIG_ENV_OFFSET=0x7C0000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="nuvoton-npcm845-evb"
@@ -17,7 +17,7 @@ CONFIG_ARCH_NPCM8XX=y
CONFIG_SYS_SKIP_UART_INIT=y
CONFIG_TARGET_ARBEL_EVB=y
CONFIG_SYS_LOAD_ADDR=0x06208000
-CONFIG_ENV_ADDR=0x803C0000
+CONFIG_ENV_ADDR=0x807C0000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_BOOTM_LEN=0x1400000
diff --git a/include/configs/arbel.h b/include/configs/arbel.h
index 61f6a5e243..b5f684e88f 100644
--- a/include/configs/arbel.h
+++ b/include/configs/arbel.h
@@ -16,7 +16,7 @@
{ 9600, 14400, 19200, 38400, 57600, 115200, 230400, 380400, 460800, 921600 }
/* Default environemnt variables */
-#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80400000\0" \
+#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80800000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
--
2.34.1
More information about the U-Boot
mailing list