[PATCH v3 2/3] phy: rcar: Split init and set_mode operations
Marek Vasut
marek.vasut+renesas at mailbox.org
Sun Sep 8 23:09:04 CEST 2024
The current init operation also sets the PHY into USB host mode.
Split the mode configuration into set_mode callback instead and
implement support for device and OTG modes as well.
The OTG mode performs auto-detection and selects either host or
device mode. In case the OTG mode is configured, submode field
can be used to select full PHY (re)initialization or only mode
auto-detection. The full (re)initialization is only necessary
once, on start up.
Since the OTG mode may enable IRQ generation in the PHY, disable
that IRQ generation in the exit callback again.
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Caleb Connolly <caleb.connolly at linaro.org>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Mathieu Othacehe <othacehe at gnu.org>
Cc: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Nishanth Menon <nm at ti.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Sean Anderson <seanga2 at gmail.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Sumit Garg <sumit.garg at linaro.org>
Cc: Tim Harvey <tharvey at gateworks.com>
Cc: Tom Rini <trini at konsulko.com>
Cc: Xavier Drudis Ferran <xdrudis at tinet.cat>
Cc: u-boot-qcom at groups.io
Cc: u-boot at lists.denx.de
---
V2: No change
V3: - Rebase on u-boot/next
- Add RB from Mattijs
---
drivers/phy/phy-rcar-gen3.c | 90 ++++++++++++++++++++++++++++++++++---
1 file changed, 85 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/phy-rcar-gen3.c b/drivers/phy/phy-rcar-gen3.c
index 7c292cae0e2..b278f995f37 100644
--- a/drivers/phy/phy-rcar-gen3.c
+++ b/drivers/phy/phy-rcar-gen3.c
@@ -8,6 +8,7 @@
#include <clk.h>
#include <div64.h>
#include <dm.h>
+#include <dm/device_compat.h>
#include <fdtdec.h>
#include <generic-phy.h>
#include <malloc.h>
@@ -31,8 +32,13 @@
#define USB2_LINECTRL1 0x610
#define USB2_ADPCTRL 0x630
+/* INT_ENABLE */
+#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
+#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
+#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1)
+
/* USBCTR */
-#define USB2_USBCTR_PLL_RST BIT(1)
+#define USB2_USBCTR_PLL_RST BIT(1)
/* SPD_RSM_TIMSET */
#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b
@@ -43,11 +49,23 @@
/* COMMCTRL */
#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
+/* OBINTSTA and OBINTEN */
+#define USB2_OBINT_SESSVLDCHG BIT(12)
+#define USB2_OBINT_IDDIGCHG BIT(11)
+
+/* VBCTRL */
+#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
+
/* LINECTRL1 */
+#define USB2_LINECTRL1_DPRPD_EN BIT(19)
#define USB2_LINECTRL1_DP_RPD BIT(18)
+#define USB2_LINECTRL1_DMRPD_EN BIT(17)
#define USB2_LINECTRL1_DM_RPD BIT(16)
/* ADPCTRL */
+#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
+#define USB2_ADPCTRL_IDDIG BIT(19)
+#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
struct rcar_gen3_phy {
@@ -65,12 +83,14 @@ static int rcar_gen3_phy_phy_init(struct phy *phy)
writel(USB2_SPD_RSM_TIMSET_INIT, priv->regs + USB2_SPD_RSM_TIMSET);
writel(USB2_OC_TIMSET_INIT, priv->regs + USB2_OC_TIMSET);
- setbits_le32(priv->regs + USB2_LINECTRL1,
- USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
+ return 0;
+}
- clrbits_le32(priv->regs + USB2_COMMCTRL, USB2_COMMCTRL_OTG_PERI);
+static int rcar_gen3_phy_phy_exit(struct phy *phy)
+{
+ struct rcar_gen3_phy *priv = dev_get_priv(phy->dev);
- setbits_le32(priv->regs + USB2_ADPCTRL, USB2_ADPCTRL_DRVVBUS);
+ writel(0, priv->regs + USB2_INT_ENABLE);
return 0;
}
@@ -102,10 +122,70 @@ static int rcar_gen3_phy_phy_power_off(struct phy *phy)
return regulator_set_enable(priv->vbus_supply, false);
}
+static int rcar_gen3_phy_phy_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ const u32 adpdevmask = USB2_ADPCTRL_IDDIG | USB2_ADPCTRL_OTGSESSVLD;
+ struct rcar_gen3_phy *priv = dev_get_priv(phy->dev);
+ u32 adpctrl;
+
+ if (mode == PHY_MODE_USB_OTG) {
+ if (submode) {
+ /* OTG submode is used as initialization indicator */
+ writel(USB2_INT_ENABLE_UCOM_INTEN |
+ USB2_INT_ENABLE_USBH_INTB_EN |
+ USB2_INT_ENABLE_USBH_INTA_EN,
+ priv->regs + USB2_INT_ENABLE);
+ setbits_le32(priv->regs + USB2_VBCTRL,
+ USB2_VBCTRL_DRVVBUSSEL);
+ writel(USB2_OBINT_SESSVLDCHG | USB2_OBINT_IDDIGCHG,
+ priv->regs + USB2_OBINTSTA);
+ setbits_le32(priv->regs + USB2_OBINTEN,
+ USB2_OBINT_SESSVLDCHG |
+ USB2_OBINT_IDDIGCHG);
+ setbits_le32(priv->regs + USB2_ADPCTRL,
+ USB2_ADPCTRL_IDPULLUP);
+ clrsetbits_le32(priv->regs + USB2_LINECTRL1,
+ USB2_LINECTRL1_DP_RPD |
+ USB2_LINECTRL1_DM_RPD |
+ USB2_LINECTRL1_DPRPD_EN |
+ USB2_LINECTRL1_DMRPD_EN,
+ USB2_LINECTRL1_DPRPD_EN |
+ USB2_LINECTRL1_DMRPD_EN);
+ }
+
+ adpctrl = readl(priv->regs + USB2_ADPCTRL);
+ if ((adpctrl & adpdevmask) == adpdevmask)
+ mode = PHY_MODE_USB_DEVICE;
+ else
+ mode = PHY_MODE_USB_HOST;
+ }
+
+ if (mode == PHY_MODE_USB_HOST) {
+ clrbits_le32(priv->regs + USB2_COMMCTRL, USB2_COMMCTRL_OTG_PERI);
+ setbits_le32(priv->regs + USB2_LINECTRL1,
+ USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
+ setbits_le32(priv->regs + USB2_ADPCTRL, USB2_ADPCTRL_DRVVBUS);
+ } else if (mode == PHY_MODE_USB_DEVICE) {
+ setbits_le32(priv->regs + USB2_COMMCTRL, USB2_COMMCTRL_OTG_PERI);
+ clrsetbits_le32(priv->regs + USB2_LINECTRL1,
+ USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD,
+ USB2_LINECTRL1_DM_RPD);
+ clrbits_le32(priv->regs + USB2_ADPCTRL, USB2_ADPCTRL_DRVVBUS);
+ } else {
+ dev_err(phy->dev, "Unknown mode %d\n", mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct phy_ops rcar_gen3_phy_phy_ops = {
.init = rcar_gen3_phy_phy_init,
+ .exit = rcar_gen3_phy_phy_exit,
.power_on = rcar_gen3_phy_phy_power_on,
.power_off = rcar_gen3_phy_phy_power_off,
+ .set_mode = rcar_gen3_phy_phy_set_mode,
};
static int rcar_gen3_phy_probe(struct udevice *dev)
--
2.45.2
More information about the U-Boot
mailing list