[PATCH] mtd: spi-nor-ids: Add support for S28HS256T

[Tudor Ambarus]

On 30.08.2024 08:00, tkuw584924 at gmail.com wrote:
> From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
> 
> Infineon S28HS256T is 256Mb Octal SPI device which has same
> functionalities with 512Mb and 1Gb parts.
> 
> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
> Reviewed-by: Pratyush Yadav <pratyush at kernel.org>

Reviewed-by: Tudor Ambarus <tudor.ambarus at linaro.org>

> ---
> Datasheet can be found:
> https://www.infineon.com/dgdl/Infineon-S28HS256T_S28HL256T_256Mb_SEMPER_Flash_Octal_interface_1_8V_3-DataSheet-v02_00-EN.pdf?fileId=8ac78c8c8fc2dd9c018fc66787aa0657
> 
> Tested on Xilinx Zynq-7000 board and Infineon internal SPI controller.
> ---
>  drivers/mtd/spi/spi-nor-ids.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
> index 457965dad1..5769e662e0 100644
> --- a/drivers/mtd/spi/spi-nor-ids.c
> +++ b/drivers/mtd/spi/spi-nor-ids.c
> @@ -383,6 +383,7 @@ const struct flash_info spi_nor_ids[] = {
>  #ifdef CONFIG_SPI_FLASH_S28HX_T
>  	{ INFO("s28hl512t",  0x345a1a,      0, 256 * 1024, 256, SPI_NOR_OCTAL_DTR_READ) },
>  	{ INFO("s28hl01gt",  0x345a1b,      0, 256 * 1024, 512, SPI_NOR_OCTAL_DTR_READ) },
> +	{ INFO("s28hs256t",  0x345b19,      0, 256 * 1024, 128, SPI_NOR_OCTAL_DTR_READ) },
>  	{ INFO("s28hs512t",  0x345b1a,      0, 256 * 1024, 256, SPI_NOR_OCTAL_DTR_READ) },
>  	{ INFO("s28hs01gt",  0x345b1b,      0, 256 * 1024, 512, SPI_NOR_OCTAL_DTR_READ) },
>  	{ INFO("s28hs02gt",  0x345b1c,      0, 256 * 1024, 1024, SPI_NOR_OCTAL_DTR_READ | NO_CHIP_ERASE) },